Maxtor Personal Storage 5000DV Manuale utente
R
Installation instructions for the Macintosh OS X 10.2 update
In order to gain Maxtor OneTouch functionality with Mac OS 10.2.x (Jaguar) you must:
• Install Mac OS X (version 10.2.4 or later)
• Install the Retrospect Express 5.0.236 Updater
• Install the Maxtor 5000 Update for Mac OS X (version 10.2.x)
Procedure:
NOTE: Do NOT connect the Personal Storage 5000 LE/DV/XT to your computer until after all
software updates are installed.
1. Upgrade your system to Mac OS X (version 10.2.4 or later).
NOTE: Skip to Step 2 if you have already installed the aforementioned Operating System.
2. Install the Personal Storage 5000 Software from the CD-ROM supplied with your 5000 LE/DV/XT drive.
NOTE: Skip to Step 3 if you have already installed the Personal Storage 5000 Software.
3. Download and extract express_50236.sit to your local system. This file can be obtained from the Dantz Website.
4. Download and extract Maxtor5000Update.pkg.sit to your local system.
5. Locate the folder that you extracted called “Retrospect Express 5.0.236”.
6. Launch the file "Install Retrospect Express" located inside that folder. Follow the on-screen prompts to
complete the installation.
7. Locate and launch the “Maxtor5000Update” file
Click on the "Continue" button to proceed.
Document #: 42098 Rev: 07
Date: 3/5/03
R
Installation instructions for the Macintosh OS X 10.2 update
8. Select a destination drive and click on the "Continue" button.
9. Follow the remaining on-screen prompts to complete the installation
10. At this point the installation will Process and Optimize. When finished, click on the "Restart" button.
11. Connect your Personal Storage 5000 LE/DV/XT unit to you Macintosh System.
NOTE: Reference the Personal Storage 5000 User's Guide for proper connection/installation instructions:
• Step 2. Connecting the Drive (see page 7)
• Step 3. Setting Up the Maxtor OneTouch Feature (see page 11)
Additional Information:
1. OneTouch button can interrupt an Immediate Duplicate operation.
Document #: 42098 Rev: 07
Date: 3/5/03
Pressing the Maxtor OneTouch button during the scanning phase of an Immediate Duplicate operation will hang
that operation in favor of the Maxtor script that was created with the Wizard. This only happens during the
scanning phase and does not seem to happen with any other immediate operations. The Maxtor script will run
without issues, but after it has completed the user is left with Retrospect in a state where the Immediate
Duplicate's "scanning" dialog box is left in the application's foreground, leaving the Directory window visible but
R
Installation instructions for the Macintosh OS X 10.2 update
inaccessible. The Stop button in this window has no effect, and the user must quit the application and re-launch it
to regain to access the Directory window.
2. Maxtor Wizard will crash the Application if previous script was just deleted.
If a user deletes a Maxtor OneTouch script from Automate Scripts and then immediately presses the button to
launch the Wizard, the Retrospect Express application will "go away" as soon as the Next button in the first
window of the Wizard is pressed. After the crash the user can simply press the button again and the Maxtor
Wizard will launch and function normally. As a historical note, the previous Maxtor release had a known issue
where, under OS X 10.1.5, the OneTouch button only worked if Retrospect Express was not already running. With
the new Maxtor drivers for OS X 10.2 under Jaguar the button now works with Retrospect Express already
running.
3. The Maxtor Wizard/OneTouch script will always run if the application is launched from a non-boot drive.
The default install location is the Applications directory of the boot volume. If the Express application directory (the
"Retrospect Express 5.0" folder and all of its contents) is copied to another partition or another hard drive and
launched from that location by double-clicking the Retrospect Express icon the application behaves as if the
button was pressed. The Maxtor Wizard will open if there is no Maxtor OneTouch script or if there is a script, it will
run.
Document #: 42098 Rev: 07
Date: 3/5/03
Altri manuali per Personal Storage 5000DV
4
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Maxtor Magazzinaggio
Maxtor
Maxtor MobileMax Manuale utente
Maxtor
Maxtor 2R015H1 Manuale utente
Maxtor
Maxtor STM3250620A - Maxtor DiamondMax 250 GB Hard... Manuale utente
Maxtor
Maxtor Shared Storage Plus+ Manuale utente
Maxtor
Maxtor OneTouch II Manuale utente
Maxtor
Maxtor Personal Storage 3000XT Manuale utente
Maxtor
Maxtor MaXLine II 300GB Manuale utente
Maxtor
Maxtor OneTouch III 200GB Manuale utente
Maxtor
Maxtor Atlas 10K V Manuale utente
Maxtor
Maxtor MaxAttach NAS 4000 Series Manuale utente
Maxtor
Maxtor OneTouch III C01W010 Manuale utente
Maxtor
Maxtor HDD Manuale utente
Maxtor
Maxtor 91360D8 Guida
Maxtor
Maxtor DiamondMax10 80 Guida
Maxtor
Maxtor DiamondMax Plus 40 Manuale utente
Maxtor
Maxtor DiamondMax16 60 Manuale utente
Maxtor
Maxtor DiamondMax Plus9 60GB AT Manuale utente
Maxtor
Maxtor STM3402111A - Maxtor DiamondMax 40 GB Hard... Manuale utente
Maxtor
Maxtor SERIAL ATA HARD DRIVE Manuale utente
Maxtor
Maxtor DIAMONDMAX VL20 92041U4 Manuale utente
