MaxWest MX-FIT Manuale utente
MX-FIT
USER MANUAL
Please read the manual before use.
The information in this document won't be modified or
extended in accordance with any notice.
The watch should be charging 2 hours at least before use.
1. Caution:
1.1 Waterproof and dustproof
The watch supports waterproof and dustproof. Please follow below
guidelines to maintain the waterproof and dustproof function.
Otherwise your device might be damaged.
·Do not use watch under the strong pressure water.
·Do not use watch when diving, snorkeling or other sports in
turbulent water.
·Please dry your hands or watch fully before operating.
·If the watch is exposed to water, please dry it fully with soft cloth. If
it is exposed to other liquids (such as salt water, pool water, soapy
water, oil, perfume, sunscreen, hand sanitizer) or chemicals (such as
cosmetics), please wash it with clean water and dry it fully with soft
cloth. Do not follow these instructions may damage its performance
and appearance.
·If the watch is dropped or hit, the waterproof and dustproof
function may be damaged.
·Do not disassemble your watch. The waterproof and dustproof
function may be damaged.
·Do not use watch in extremely high or low temperature
environments.
·Do not use blowers and other heated equipment to dry the watch.
·In sauna room, the waterproof function may be damaged.
1.2 Cleaning and management of MX-FIT
Follow the below points to ensure that MX-FIT is operating normally
and looks good. Otherwise, maybe damage MX-FIT and cause skin
irritation.
·Protect watch from dust, sweat, ink, oil and chemical products (such
as cosmetics, antibacterial sprays, hand sanitizers, detergents, and
insecticides). Otherwise, the internal and external parts may be
damaged or causes performance degradation. If MX-FIT is stained
with above substances, please clean it with lint-free soft cloth.
·When cleaning MX-FIT, do not use soap, detergent, abrasive
materials, compressed air, ultrasonic waves or external heat sources.
Otherwise, MX-FIT may be damaged. Soap, detergent, hand sanitizer,
or detergent residue may cause skin irritation.
·After exercising or sweating, please clean your wrist and strap. Use
water to clean MX-FIT and dip a small amount of alcohol to wipe,
then dry it thoroughly.
·If MX-FIT is stained or infiltrated with other objects, please use wet
soft toothbrush to clean it.
1.3 If you are allergic to material on MX-FIT, please pay
attention when using
·Manufacturer conducted testing about hazardous materials on
MX-FIT by internal and external certification agency, including testing
of all materials contact skin, skin toxicity testing, and wearing testing.
·MX-FIT contains nickel. If your skin is very sensitive or you are
allergic to the materials on MX-FIT, please take necessary precautions.
–Nickel: MX-FIT contains a small amount of nickel. The content is
lower than the reference value of European REACH regulations. You
will not be exposed to the nickel in MX-FIT and our device has passed
the international certification test. However, if you are allergic to
nickel, please use MX-FIT with caution.
·All materials used on MX-FIT comply with relevant inspection
standards such as REACH and RoHS.
2. Product specification
Model:MX-FIT
CPU RTL8762CKARM Cortex-M053MHz
Memory:RAM 128Kb+ ROM 64Mb
Capacitive touch screen 1.4” 240*240 pixel IPS
Function:Temperature, Heart Rate, Push Dial, Do not disturb,
Daily activity, Sleep, Notification (G-mail, Facebook, Skype,
WhatsApp and so on)
Battery Lithium-ion 3.7V/160mAh
3.Product details
3.1 Product details
(1) Power on: When the watch is in the off state, press the button for
3 seconds to turn it on, and the main page of the watch will be
displayed after booting.
(2) Touch screen operation: Swipe to the right to the menu page, then
tap the function icon to enter the corresponding sub-interface.
(3) Bright screen: When the watch is in the state of interest screen,
you can touch the screen bright screen. If the turn button is turned
on in the APP, the user can also achieve the bright screen by turning
the wrist, and the watch is displayed after the screen is bright. Main
interface.
(4) Shutdown: Click the Setting icon, click System - Shut down, click
to shut down.
4. Products quick into
4.1 Products quick into
Touch dial definition
(1) Long press the main interface: enter the home page thumbnail,
you can view it left and right, click touch to switch the home page.
(2) Slide to the right: display function list -> Daily activity,
Temperature, Heart rate, Message, Sports, Sleep, Weather, Music,
Relax, Timer, Find phone, Setting, etc., click touch to enter the
corresponding function (list can be up and down Slide)
(3) Sliding down: Display: date, Bluetooth, power function icons are:
Timer, Brightness, Setting, Do Not Disturb mode.
(4) Slide up: information storage, heart rate monitoring, Daily activity.
(5) Slide to the left: display the static icon, click to enter the
corresponding function, right stroke to return to the previous level.
4.2 Clock Display
Setting method:
Power on,when the watch in clock mode, please long press middle
screen and set different clock interfaces if you like.
5.Product quick use
5.1 Download and install
You have to download and install the " HitFit Pro " App from APP
Store or Google Play Store:
5.2 Connection and Synchronize data
5.2.1 Bluetooth connection
4.2.1.1 For Android:
Open HitFit Pro -- Click “Device”in bottom -- “Device Connection”
--Searching Device.
Click OK and Click Pair to bind watch as below.
Open“HitFit Pro”- left slide menu bar - Device - select the
corresponding device icon - search for the corresponding Bluetooth
address pairing
5.2.1.2 For IOS:
Connect step 1:Open“HitFit Pro”app, “Device ”on “Device
connection”screen to search Bluetooth devices nearby, find watch
name MX-FIT and paired it in app. Once MX-FIT connected will show
in the phone's Bluetooth menu screen as below pictures.
Open“HitFit Pro”- left slide menu bar - Device - select the
-corresponding device icon - search for the corresponding Bluetooth
address pairing.
Connect step 2: Now the Bluetooth menu interface displays
MX-FIT connected successfully as below picture shows.
After connected successfully, as shown by the icon on the left.
5.2.2 Synchronizing data
Pair your watch with " Hitfit Pro " App, Press " " to sync data.
Your data will be shown on App accordingly.
Notice:
Please don’t shut the Bluetooth notify service when you are
clearing software by background or close background application
software. It will affect the sync function between watch and phone if
shut it.
5.3 Basic function
5.3.1 Daily activity
(1) Function introduction: The watch will display the user's total
number of steps on the day, walking distance, calories burned on the
same day, and the data will be cleared at 0 o'clock every day.
(2) Operation instructions: The main interface slides left and right and
clicks the motion data to switch to the step counter interface. After
no operation for 3 seconds, the screen is automatically turned off.
5.3.2 Sports
In sports mode: the single-point function icon allows you to enter
sports modes such as walking, running, riding, climbing, and
basketball.
5.3.3 Heart rate
(1) Function introduction:
Heart rate measurement: The watch will measure the user's heart
rate under the heart rate measurement interface. After the test is
completed, the vibration will display the result. After no operation,
Indice
