MBM EREBUS 28 Manuale utente
EREBUS 28”
USER MANUAL
EREBUS
EREBUS USER MANUAL
1. FOREWORDE 4
1.1 General 4
1.2 Assistance 4
1.3 Graphic form of security warnings 4
2. SAFETY WARNINGS 5
2.1 General safety rules 5
2.2 Responsabilites 5
2.3 Warning for users 6
2.4 Maintenance warnings 6
2.5 Other provisions 7
2.6 Unpaking and tuning 7
2.6.1 Saddle regulation
7
2.6.2 Pedal mounting
8
3. BICYCLE DESCRIPTION 9
3.1 General description 9
3.2 Data sheet 10
3.3 Brake levers 1 11
3.4 Speed change 11
3.5 Service system management 12
3.5.1 Service managements commands
12
3.5.2 Turning the system on/off
12
3.5.3 Support Activation
13
3.5.4 Service level setting
13
3.6 Display graphic interface 14
3.6.1 General screen composition
14
3.7 On-board computer mode
15
3.7.1 Race mode
15
3.7.2 Summary mode
16
3.8 Walking assistance mode 17
3.9 Menu 18
3.9.1 Screen brightness
19
3.9.2 Change language
19
3.9.3 Units of measurement
19
3.9.4 Weight
20
3.9.5 Gender
20
INDEX
3.10 Error code 20
3.10.1 Troubleshooting 22
3.11 Battery 23
3.11.1 Charge status
23
3.11.2 Battery installation/removal
23
3.11.3 Battery charging
25
3.11.4 Troubleshooting
25
3.12 Front and rear headlight 26
3.13 Front suspension 26
4. CONDITIONS OF USE AND INTENDED ENVIRONMENT 27
4.1 Intended use 27
4.2 Environment of use 28
4.3 Improper uses and contraindications 28
5. LIFTING AND TRANSPORT 29
5.1 Lifting 29
5.2 Transport 29
6. COMMISSIONING 30
6.1 Battery charge 30
6.2 Preliminary functional checks 31
6.2.1 Control devices
31
6.2.2 Wheels
31
6.2.3 Braking
31
6.2.4 Frame, handlebar and saddle position
32
6.2.5 Brake adjustment
33
6.2.6 Suspension adjustment
33
6.2.7 Headlight operation
33
7. USE OF THE BICYCLE 34
7.1 Use of the bicycle 35
7.2 Braking 35
7.3 Bicycle parking 35
EREBUS USER MANUAL
p.3
8. MAINTENANCE 36
8.1 General 36
8.2 Daily maintenance and checks 36
8.2.1 Control of nameplates and pictograms
36
8.2.2 Wheel control
36
8.2.3 Brake operation control
36
8.3 Weekly maintenance and checks 37
8.3.1 Washing and cleaning
37
8.3.2 Lubrification and chain tension control
37
8.3.4 Frame and bolt control
37
8.4 Monthly maintenance and checks 38
8.4.1 Derailleur control and adjustment
38
9. TECHNICAL ASSISTANCE AND SPARE PARTS 39
10. WAREHOUSE 39
11. DISPOSAL COMPONENTS AND MATERIALS 40
12. WARRANTY RULES 41
13. CONFORMITY 42
EREBUS USER MANUAL
p.4
1. FOREWORD
1.1 General
This manual is an integral and essential part of the pedal assisted bicycle model E - EREBUS 28”. Prior to commissioning,
it is imperative that users read, understand, and strictly follow the following dispositions.
The manufacturer shall not be liable for damage to persons and/or property or for damage to the pedal cycles if they are
used in a manner not in accordance with the instructions. In view of the continuous technological development, the man-
ufacturer reserves the right to modify the components, including the chassis, without prior notice.
without prior notice, without automatically updating this manual.
1.2 Assistance
For any inconvenience or request for clarification, contact the authorized dealer, who has competent and specialized
personnel, as well as specific equipment and original spare parts.
1.3 Graphic form of safety warnings
The following graphic warning symbols will be used to identify the safety messages in this manual. They are intended to
draw the attention of the reader/user to the proper and safe use of the pedal-assisted bicycle.
It highlights the presence of dangers that
cause residual risks to which the user must
pay attention in order to avoid injury or ma-
terial damage.
DANGER
It highlights behavioral rules to keep in order to
avoid damage to the pedal assisted bicycle and/
or the onset of dangerous situations.
ATTENTION
EREBUS USER MANUAL
p.5
2. SAFETY WARNINGS
2.1 General safety rules
Even if you are already familiar with the use of pedal-assisted bicycles, you should follow the instructions given here, in
addition to the general precautions to be observed when riding a motor vehicle general precaution to be observed when
riding a motorized bicycle.
Specifically:
• Acquire full knowledge of the pedal assisted bicycle.
• Read the manual carefully to learn about its operation, safety devices, and all necessary precautions for safe use of the
bicycle. to use the bike safely. All this is to enable safe use.
• Carefully maintain your pedal assisted bicycle in perfect working order.
For any inconvenience or request for clarification, please contact the authorized dealer without hesitation, who has at
his disposal competent and specialized personnel, specific equipment and original spare parts.
2.2 Responsibility
Failure to comply with the operating instructions and safety prescriptions contained in this manual exempts the manufac-
turer from any liability.
If the pedal assisted bicycle is not serviced in accordance with the instructions provided, with non-original spare parts or in
any case in such a way as to impair its integrity or change its characteristics, the manufacturer will be held harmless from
any responsibility regarding the safety of persons and the defective operation of the pedal assisted bicycle.
ATTENZI-
USING THE PEDAL-ASSISTED BICYCLE
Every user must first read the instruction manual, especially the chapter on safety instructions.
ATTENTION
HAZARDS OF PEDELEC USE
• Despite the application of safety devices, for safe use of your pedal assist bicycle, please take note of all accident preven-
tion requirements in this manual.
• -lways remain focused while riding and DO NOT underestimate the residual risks associated with riding a pedal assist
bicycle.
EREBUS USER MANUAL
p.6
For any information that is not included or cannot be deduced from this manual, please consult your authorized dealer
directly.
2.3 Warning fo users
1. It is forbidden to load a passenger.
2. It can only be used by adults and experienced kids. Do not take alcohol or drugs before riding the pedal assisted bicycle.
3. These pedal assisted bicycle models are designed and built to be used outdoors, on private and public roads and envi-
ronments.
4. Do not ask the pedal assist bicycle to perform beyond what it was designed for.
5. Never ride your pedal assist bicycle with any parts removed.
6. Avoid uneven surfaces and obstacles.
7. Ride with both hands on the handlebars.
8. Replace worn and/or damaged parts, check that guards are working properly before use.
2.4 Maintenance warnings
1. All maintenance operations must be carried out with the battery disconnected.
2. During each maintenance phase, operators must be equipped with the necessary accident prevention equipment.
3. The tools used for maintenance must be suitable and of good quality.
4. Do not use gasoline or flammable solvents as cleaning agents, but always use non-flammable and non-toxic solvents.
5. Limit the use of compressed air for cleaning as much as possible (max 2 bar) and protect yourself with goggles with
side shields.
6. Never resort to the use of open flames as a means of lighting when carrying out inspection or maintenance operations.
7. After any maintenance or adjustment, make sure that no tools or foreign bodies are left between the movement parts
of the pedal- assisted bicycle.
ATTENTION
UNAUTHORIZED MODIFICATIONS
If you hear unusual noises or feel anything strange, stop your pedal assisted bicycle immediately. Check it later and, if nec-
essary, contact your authorized dealer.
ATTENTION
ORIGINAL REPLACEMENTS
Use only original spare parts supplied by M.B.M. S.r.l. Any liability of the Manufacturer for damage or loss of functionality
caused following the use of non-original accessories and parts is excluded.
EREBUS USER MANUAL
p.7
2.5 Other provisions
The first thing to do when starting use is to check the presence and integrity of the protections and the operation of the
safety devices. If you find any defects, do not use the pedal assisted bicycle!
FENDERS
It is therefore strictly forbidden to modify or remove the guards, controls, la-
bels and information plates.
WARNING
WARNING
IMPORTANT NOTICE:
For your safety, the seatpost reference
mark (B) should never be outside the
tube into which the seatpost is inserted.
ATTENTION
ASSEMBLY
In the event that you do not have the ap-
propriate instrumentation for adjustment
or do not have the skills, contact the au-
thorized reseller.
2.6 Unpacking and tuning
The pedal assisted bicycle is delivered fully assembled and in working condition.
2.6.1 Saddle adjustment
Adjusting the height of the saddle is an essential prerogative for the correct use of the pedal assisted bicycle. Incorrect
adjustment can generate structural breaks in the frame.
Adjust the height of the saddle by activating the quick release mechanism (Ref. A - Figure 1).
Check that the mechanism is tightened before testing the seat and using the vehicle. Do not raise the saddle beyond the
limit switch signal located in the seat post (Ref. B - Figure 1).
FIG. 1
EREBUS USER MANUAL
p.8
2.6.2 Montage Pedals
Right Pedal: it is identified by the letter R marked on its pin.
For pedal mounting, screw by turning the pin clockwise.
(Figure 2)
Left Pedal: it is identified by the letter L marked on its pin.
For pedal mounting, screw by turning the pin counterclock-
wise. (Figure 2)
ATTENTION
ASSEMBLY
In the event that you do not have the appropriate
equipment for adjustment or do not have the skills,
contact the authorized dealer.
ATTENTION
ASSEMBLY
For a correct setting of the pedals is necessary use
a key of 15
FIG. 2
EREBUS USER MANUAL
p.9
3. DESCRIPTION OF BICYCLE
3.1 General description
The pedal-assisted bicycle is designed and built to be used outdoors, on roads and private or public environments. In par-
ticular, the components and the type of pedal-assisted bicycle, allow you to face paths with asphalted and dirt surfaces
without particular roughness.
The pedal-assisted bicycle is equipped with a rechargeable battery and an electric motor, whose intervention takes place
only in conjunction with the pedaling and gradually stops as the speed of the vehicle approaches 25 km / h, and then stops
completely at that speed.
For the management of the assistance system there is a special control located next to the left knob, on the handlebar.
On the right side of the handlebar there is a control system for gear selection..
INCORRECT AND UNINTENDED USE
The bicycle has been designed and manufactured for the specified use; a differ-
ent use and non-compliance with the technical parameters set by the manufac-
turer, may constitute a dangerous condition for users.
WARNING
EREBUS USER MANUAL
p.10
3.2 Technical sheet
1. MOTOR AND CONTROLS
2. MOTOR
3. SADDLE
4. BATTERY
5. PEDALS
6. FORK
7. FRONT LIGHT
8. REAR LIGHT
9. REAR DERAILLEUR
CODE E809 MAN
FRAME ALUMINIUM HYDROFORMED
FORK SUSPENSION WITH ADJUSTMENT
CRANKSET 38 TEETH
REAR DERAILLEUR DEORE
SHIFTER 10 SPEEDS
BRAKES SHIMANO BR-M315 HYDRIC DISK
DISKS SHIMANO ANT: Ø 180 MM POST: Ø 160 MM
WHEELS 28*2.00
SADDLE SADDLE ITALIA SPORTOURER
PEDALSRIGHT AND LEFT NON-SLIP POLYMER MATERIAL
MOTOR OLI SPORTS 85 NM
BATTERY PHYLION BN-18, 14 AH, 504 WH
SPEED 25 KM/H
DISPLAY LCD
POWER LEVEL 5 LEVELS
WEIGHT 25 KG
Indice
Altri manuali MBM Bicicletta
MBM
MBM RAMBLA SPORT LADY Manuale utente
MBM
MBM METIS 29 Manuale utente
MBM
MBM E-METRO Manuale utente
MBM
MBM PULSE 28 MAN Manuale utente
MBM
MBM LA RUE 28 Manuale utente
MBM
MBM KAIROS 29 Manuale utente
MBM
MBM KAIROS PLUS Manuale utente
MBM
MBM FUNK URBAN 20 Manuale utente
MBM
MBM PRIMAVERA 28 Manuale utente
MBM
MBM CHAOS 26 Manuale utente
