1,control level 2,side brush lift level 3,handle
4,power switch 5,filter vibration rod 6,big wheel
7,operation handle 8,shell 9,side brush
10,front wheel
MAIN BRUSH HEIGHT CHECK AND ADJUSTMENT
1, Check that the main brush is at the correct height from the ground, according to the
following procedure:
Drive the machine on a level ground.
Keep the machine stationary and rotate the main brush for a few seconds.
Stop and lift the main brush then move the machine.
Check that the main brush print, along its length, is 2 to 4 cm wide.
If the print is not within specifications, it is necessary to adjust the brush height.
