McAfee NS9100 Manuale utente

NS9x00 Quick Start Guide

Revision E

McAfee® Network Security Platform

This quick start guide explains how to quickly set up and activate your McAfee® Network Security Platform

NS-series Sensor in in-line mode.

All product documentation referenced in this quick start guide is found on the McAfee Service Portal.

The NS9100/NS9200 Sensor model

Figure 1 Sensor front panel

1Console port (1)

2QSFP+ 40 Gigabit Ethernet ports (2)

3Two slots for I/O modules (Any combination of the interface modules can be used)

• QSFP+ 40 Gigabit Ethernet ports (4)

• QSFP+ 40 Gigabit Ethernet ports (2)

• SFP/SFP+ 1/10 Gigabit Ethernet Monitoring ports (8)

• RJ-45 10/100/1000 Mbps Ethernet Monitoring ports (6)

4RJ-45 10/100/1000 Mbps Ethernet Monitoring ports (8)

The supported transceiver modules are QSFP+, SFP+ (M2M and SM), SFP Fiber (MM and SM) and SFP Copper.

Figure 2 Sensor rear panel

1USB ports (2) 4RJ-45 100/1000/10000 Management port

(Mgmt) (1)

2Power supply A (Pwr A) 5RJ-45 100/1000/10000 Response port (R1) (1)

3Power supply B (Pwr B) (optional on NS9100) 6RJ-45 Auxiliary port (Aux) (1)

The NS9300 Sensor model

Figure 3 Sensor front panel

The NS9300 Sensor consists of a Primary Sensor, NS9300P, and a Secondary Sensor, NS9300S.

1Console ports on the NS9300P and NS9300S Sensors (2)

2QSFP+ 40 Gigabit Ethernet Interconnect ports (4). G0/1 and G0/2 on NS9300P Sensor and G4/1 and G4/2 on

NS9300S Sensor.

3Four slots for I/O modules (Any combination of the interface modules can be used)

• QSFP+ 40 Gigabit Ethernet ports (4)

• QSFP+ 40 Gigabit Ethernet ports (2)

• SFP/SFP+ 1/10 Gigabit Ethernet Monitoring ports (8)

• RJ-45 10/100/1000 Mbps Ethernet Monitoring ports (6)

4RJ-45 10/100/1000 Mbps Ethernet Monitoring ports (16)

The supported transceiver modules are QSFP+, SFP+ (MM and SM), SFP Fiber (MM and SM) and SFP Copper.

Figure 4 Sensor rear panel

1USB ports (4)

2Power supply A (Pwr A)

3Power supply B (Pwr B)

4RJ‑45 100/1000/10000 Management port (Mgmt) (2). Mgmt on NS9300S Sensor is used as an interconnect

port.

5RJ‑45 100/1000/10000 Response port (R1) (2). R1 on NS9300P Sensor is used as an interconnect port.

6RJ‑45 Auxiliary ports (Aux) (2)

Verify the contents in the box

The following accessories are shipped in the NS-series Sensor crate:

• Sensor

• Power supply

• Power cords. McAfee provides a standard and international power cables.

• Set of rack mounting rails

• Printed Quick Start Guide

Verify the hardware and software requirements

The following hardware requirements are to be met. For more information, see the Installation Guide.

The following are the system requirements for a Manager server.

Minimum required Recommended

OS Any of the following:

• Windows Server 2008 R2 Standard or Enterprise Edition,

English OS, SP1 (64 bit) (Full Installation)

• Windows Server 2008 R2 Standard or Enterprise Edition,

Japanese OS, SP1 (64 bit) (Full Installation)

Only X64 architecture is supported.

Same as the minimum

required.

Memory 4GB 8GB

CPU Server model processor such as Intel Xeon Same

Disk space 100GB 300GB or more

Network 100Mbps card 100/1000/10000 Mbps card

Monitor 32-bit color, 1024 x 768 display setting 1280 x 1024

The following are the system requirements for client systems connecting to the Manager application.

Minimum Recommended

OS Windows 7

RAM 2 GB 4 GB

CPU 1.5 GHz processor 1.5 GHz or faster

Browser • Internet Explorer 8.0 or 9.0.

• Mozilla Firefox 4.0 and above.

Internet Explorer 9.0 .

Minimum Recommended

OS Windows XP SP3.

RAM 1 GB 2 GB

Browser • Internet Explorer 7.0 or 8.0.

• Mozilla Firefox 4.0 and above.

Internet Explorer 8.0

The following software are to be installed.

• Sensor image

• Manager image

• Signature set

Install the slide rails

Follow this procedure to assemble the slide rails and position the Sensor on it.

Task

1Rack installation - Remove inner member from slides

1front bracket 4inner member

2outer member 5safety locking pin

3rear bracket 6release button

Pull the release button to remove inner member from slides.

2Rack installation - Install slides to rack

Align brackets to desired vertical position on the rack and insert the fasteners. Move the ball retainer to the

front of slides.

Do not handle the NS-series appliance by the mounting brackets

3Chassis installation - Install inner member to chassis

Align inner member key holes to standos on chassis, move inner member following the direction the

picture.

4Chassis installation - Install chassis to xed slides

Pull the release button in the inner member to release the lock and allow the chassis to close.

5Chassis removal - Extend slides

Fully extend the slides until it is in the locked position, pull the release button to release lock and disconnect

inner member from slides.

6Chassis removal - Remove inner member from chassis

Press safety locking pin to release inner member from chassis.

While installing NS9300, this procedure is to be followed for both the primary and the secondary Sensors.

Install the interface modules

You can purchase the following interface modules and insert them into the relevant slots on your NS-series

Sensor.

• 2-port QSFP+ 40 Gigabit interface module

• 4-port QSFP+ 40 Gigabit interface module

• 4-port SFP/SFP+ 10/1 Gigabit 8.5 µm (SM) interface module with internal fail-open

• 4-port SFP/SFP+ 10/1 Gigabit 50/62.5 µm (MM) interface module with internal fail-open

• 8-port SFP/SFP+ 1/10 Gigabit interface module

• 6-port RJ-45 10/100/1000 Mbps Ethernet interface module

Task

1Remove the module from its protective packaging.

2Grip the sides of the module with your thumb and fore-nger and insert the module into the slot.

3Drive in the screws xed on the sides of the module to attach it to the Sensor.

Cable the Management and Console ports

Task

Plug a Category 5e Ethernet cable in the Management port (labeled Mgmt):

aon the rear panel of the NS9100 and NS9200 Sensors.

bon the rear panel of the NS9300P Sensor.

2Plug the other end of the cable into the network device connected to your Manager server.

Plug the DB9 Console cable(s) into the Console port (labeled Console):

aon the front panel of the NS9100 and NS9200 Sensors.

bon the front panel of the NS9300P and NS9300S Sensors.

4Connect the other end of the Console port cable directly to a COM port of the PC or terminal server you will

be using to congure the Sensor (for example, a PC running correctly congured Windows Hyperterminal

software). You must connect directly to the console for initial conguration; you cannot congure the Sensor

remotely.

Terminal servers are provided for console access.

The required settings for Hyperterminal are:

• Baud rate: 115200 • Stop Bits: 1

• Number of Bits: 8 • Control Flow: None

• Parity: None

5Plug one end of the power cable into the power inlet and plug the other end into a power source. The

Sensor ships with standard US power and international cables.

The NS-series Sensor does not have a power switch; you need to only plug the power cable into a power

source.

Cable the Monitoring ports

This procedure describes how to cable a Sensor to run in In-line mode.

Task

Plug the cable appropriate for use with your transceiver module into one of the Monitoring ports labeled x

(for example, 1).

2Plug the cable appropriate for use with your transceiver module into one of the Monitoring ports labeled y

(for example, 2).

3Connect the other end of each cable to the network devices that you want to monitor. (For example, if you

plan to monitor trac between a switch and a router, connect the cable connected to 1 to the router and

the one connected to 2 to the switch.)

On the NS9300P Sensor, do not use ports G0/1 and G0/2 and on the NS9300S Sensor, do not use ports G4/1

and G4/2. These ports are reserved for interconnection between the NS9300P and NS9300S Sensors.

Questo manuale è adatto per i seguenti modelli

Altri manuali McAfee Firewall

McAfee

McAfee M-1250 - Network Security Platform Manuale utente

McAfee

McAfee INTRUSHIELD 1400 Manuale utente

McAfee

McAfee IIP-M65K-ISAA - Network Security Platform... Manuale utente

McAfee

McAfee M-1250 - Network Security Platform Manuale di installazione e funzionamento

McAfee

McAfee NS Series Manuale utente

McAfee

McAfee M4050 - Network Security Platform Manuale utente

McAfee

McAfee MFO-3400-SWGA - Web Security Appliance 3400... Manuale utente

McAfee

McAfee IIP-M80K-ISAA - Network Security Platform... Manuale utente

McAfee

McAfee MAP-3300-SWG - Web Security Appliance 3300 Manuale utente

McAfee

McAfee Data Loss Prevention Prevent Manuale utente

McAfee

McAfee NS3500 Manuale utente

McAfee

McAfee M-3050 Manuale utente

McAfee

McAfee 1650 Istruzioni per l'installazione

McAfee

McAfee M-3050 Manuale utente

McAfee

McAfee SG310 Manuale di istruzioni

McAfee

McAfee NS7200 Manuale utente

McAfee

McAfee MSA-3400-SWGI - Web Security Appliance 3400 Manuale utente

McAfee

McAfee M-1250 - Network Security Platform Manuale utente

McAfee

McAfee SG720 Manuale utente

McAfee

McAfee Manager Appliance Manuale utente

McAfee

McAfee ATD-3000 Istruzioni per l'installazione

McAfee

McAfee M-1250 - Network Security Platform Guida di riferimento rapido

McAfee

McAfee M-1250 - Network Security Platform Manuale utente

McAfee

McAfee NS5100 Manuale utente

Manuali Firewall popolari di altre marche

Cisco

Cisco S190 Manuale utente

Fortinet

Fortinet FortiGate Voice Series Manuale utente

ADTRAN

ADTRAN NetVanta 2300 Manuale utente

SecureLogix

SecureLogix ETM System Manuale utente

NETGEAR

NETGEAR ProSafe FVX538 Manuale utente

Lanner

Lanner FW-8877 Manuale utente

Huawei

Huawei USG6000 Series Manuale di installazione e funzionamento

H3C

H3C SecPath F5000-AI-15 Manuale utente

Nexcom

Nexcom DNA 1150 Manuale utente

Fortinet

Fortinet FortiGate-60 series Manuale utente

Cisco

Cisco 3110 Manuale

Draytek

Draytek Vigor2860 Series Manuale utente

Lanner electronics

Lanner electronics FW-7650 Series Manuale utente

Swisscom

Swisscom Internet Backup Manuale utente

SonicWALL

SonicWALL NSa 5700 Manuale utente

DPtech

DPtech FW1000 SERIES Manuale utente

FEITIAN

FEITIAN MultiPass FIDO Manuale utente

EBLOCKER

EBLOCKER PRO Manuale utente