MCM Electronics 555-10300 Manuale utente

Page <1> V1.029/04/21

Newark.com/exclusive-brands

Farnell.com/exclusive-brands

Element14.com/exclusive-brands

Sound Reinforcement / DJ Speaker Systems

User Manual

Part Number: 555-10300, 555-10305, 555-10310,

555-10315, 555-10317, 555-10320, 555-10325,

555-10330, 555-10335, 555-10340, 555-10345,

555-10350, 555-10290 & 555-10295

Page <2> V1.029/04/21

Newark.com/exclusive-brands

Farnell.com/exclusive-brands

Element14.com/exclusive-brands

Each speaker shares the following features:

• Piezoelectric horn tweeters

• Corner protectors

• Recessed handles

• 1-3/8″ diameter pole mount

• Metal grills

• Heavy-duty MDF cabinets

• ¼″ input connections as well as binding posts

• One year limited warranty

Specications

Part Number Type Woofer Tweeter

Power

Capacity

(peak)

Frequency

Response

SPL

(W/M)

Imped-

ance

Dimensions

Inches

(H×W×D)

555-10300 Main Speaker 8" Piezo Horn 300W 35Hz~20KHz 89dB 8Ω 17.5 × 11.5 × 10

555-10305 Main Speaker 10" Piezo Horn 400W 30Hz~20KHz 90dB 8Ω 19.7 × 14.5 × 12.2

555-10310 Main Speaker 12" Piezo Horn 500W 25Hz~20KHz 91dB 8Ω 21.6 × 15.4 × 14

555-10315 Main Speaker 15" Piezo Horn 600W 20Hz~20KHz 92dB 8Ω 25 × 17.8 × 16

555-10317 Subwoofer 12" N/A 600W 25Hz~800Hz 90dB 8Ω 16.9 × 15.3 × 14.4

555-10320 Subwoofer 15" N/A 700W 20Hz~500Hz 91dB 8Ω 19.7 × 17.8 × 16.1

555-10325 Subwoofer 18" N/A 1000W 20Hz~500Hz 92dB 8Ω 25.2 × 21.6 × 17.7

555-10330 Floor Monitor 10" Piezo Horn 400W 30Hz~20kHz 90dB 8Ω 13.4 × 23.2 × 14

555-10335 Floor Monitor 12" Piezo Horn 500W 25Hz~20kHz 91dB 8Ω 15 × 25 × 15.75

555-10340 Floor Monitor 15" Piezo Horn 600W 20Hz~20kHz 92dB 8Ω 18.5 × 29 × 17

555-10345 Tweeter Array N/A (6) Piezo Horn 200W 1kHz~16kHz 89dB N/A 5.4 × 19.5 × 9.8

555-10350 Tweeter Array N/A (5) Piezo Horn 600W 1kHz~20kHz 95dB N/A 10.8 × 17.1 × 13.8

555-10290 Boom Box 12” Piezo Horn 800W 30Hz~20kHz 92dB 8Ω 35 × 15.4 × 13.8

555-10295 Boom Box 15” Piezo Horn 1000W 20Hz~20kHz 93dB 8Ω 41.7 × 18.1 × 15

Installation and Use

Connection and installation of these speakers is fairly straight forward. Each model includes a 1/4 jack and a pair of binding post

connections. Binding posts are positioned with standard spacing, so conventional speaker cables with paired banana plugs

may be used. Additionally, each binding post has a feed hole which will accept up to 12AWG wire. For prosound applications, it

is recommended that at least 16AWG wire be used for short lengths, longer lengths require 14AWG or 12AWG cable.

Binding post and 1/4” jacks are internally connected in parallel, and either may be used. Naturally, you would never connect

a single speaker to more that one amplier, however these two connections may be utilized simultaneously to connect more

than one speaker to a single line. Note that most ampliers are only capable of loads above 4Ω so only two speakers can be

connected to a single output.

Prior to connection to the amplier, make certain that the amplier is turned o󰀨, with the volume at the minimum setting. Attach

the speaker, using a proper speaker cable, turn on any source gear (mixer, cd player, musical instrument etc.), then turn on the

amplier. Increase amplier volume until sound reaches the desired level.

Page <3> V1.029/04/21

Newark.com/exclusive-brands

Farnell.com/exclusive-brands

Element14.com/exclusive-brands

While these speakers are designed for rugged road use, care must be taken when using and transporting. They must not get

wet, be exposed to extreme levels of heat or humidity. Also, as they are heavy, extreme care should be used when placing

speakers on top of speaker stands and pole mounts.

Important

These speakers are intended for stationary use on at, solid, level surfaces. When using with speaker stands, it is the

responsibility of the user to be certain the stand is capable of supporting the weight of the speaker. Additionally, these are not

intended for ying installations. They should not be retrotted with ying hardware for support above stages.

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for

the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,

any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make

any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or

where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its

negligence. MCM is the registered trademark of Premier Farnell Limited 2019.

Questo manuale è adatto per i seguenti modelli

Altri manuali MCM Electronics Sistema di altoparlanti