page 4
Connect the terminal device
The terminal device must be connected to the LAN port of the MX560.
The WAN port is not provided by default for connecting terminal devices!
The terminal device can be set to ‘Obtain an IP address automatically’, in which case the
MX560 DHCP server automatically assigns the IP address 192.168.0.100.
Alternatively, the network settings can also be fixed in the terminal device:
IP address: 192.168.0.100
Default Gateway: 192.168.0.1 (LAN IP address of the MX560)
DNS server: 192.168.0.1 (LAN IP address of the MX560)
All incoming data packets to the MX560 are forwarded to the connected terminal device
192.168.0.100.
Quick Start is completed
The MX560 Router and the connected terminal device are now accessible over the mobile
network with the respective mdex IP-service.
mdex fixed.IP+:Remote access via web.direct or Control Station Device (optional).
mdex public.IP: Remote access via the public IP address.
More information about the setup of the MX560 can be found in the MX560 Setup
Guide or at mdex support page: https://wiki.mdex.de.
A detailed description of connecting multiple terminal devices can be found at MX560
Setup Guide →Chapter "Connection of terminal devices".
