Meanwell KDA-64 Manuale utente
KDA-64 KNX to DALI Gateway
Instruction Manual
KDA-64 Instruction Manual
Content
1.Using the application program ..............................................................
.................................................................
............................................................
................................................................
.......................................................................
..............
....................................................................
..................................................
.............................................
...............
............................
...
...............................
..............................................................................
.....................................................................................
....................................................................................
..........................................................
................................
.....................................................
....................
1
1
1
1
3
8
20
31
34
31
32
34
36
22
25
26
27
9
5
6
2.General product information
2.1 DALI Bus system properties
2.2 KDA-64 product features
3.1 Installing the Plug-In
4.1 Commissioning with KDA-64 via web site or pushbuttons
6.1 Configuration buttons
7.1 Special functions in 'Normal Mode
7.2 Special functions in 'Extended Mode'
7.1.1 Synchronisation with the connected DALI segment
7.1.2 User-friendly names for ECGs and groups
7.2.1 Preparation and planning the DALI commissioning in 'Extended Mode
7.2.2 DALI commissioning in 'Extended Mode'
6.2 Control buttons
6.3 ECG fields
6.4 Group fields
6.5 Information and status fields
4.2 Commissioning with KDA-64 via ETS Plug-In
3.2 Principal structure of the Plug-In
3.3 Operating modes of the Plug-In: DALI commissioning
........
.............................................................................
...........................................................
........................................................................
...........................................
3
8
10
16
31
3.General properties of the ETS application program: KDA-64 Plug-In
4.DALI commissioning
5.Display and push-button control
6.Control via web browser
7.ETS Special and commissioning functions
Sep. 2017 Version 0
KDA-64 Instruction Manual
Content
....
................................
.................................................
.......................................
.............................................................
...........................................
..............................................
..........................
..................................................................................
..........................................................
......................................
........................................................
.......................................................
........................................................................
............................................................................
..............................................................................
.............................................................................
................................................................
......................
..................................................................................
...............................................................
39
40
41
41
42
38
43
44
45
49
49
50
51
52
45
46
47
47
47
48
49
7.2.4 Using dummy ECGs in 'Extended Mode'
7.3.1 Using IP for plug-in communication
7.3.2 Parameter templates
7.3.3 DALI configuration data back-up
7.3 General extra functions in the ETS
8.1. Quick exchange of individual ECGs
8.2 Extending the existing system – post-installation
9.1 Normal mode
10.1 Recording operating hours
10.2 Individual fault recognition at ECG level
10.3 Fault analysis at group level
10.4 Fault analysis at device level
11.1 The scene module
9.2 Permanent mode
9.3 Staircase mode
9.4 Night-time mode
9.5 Panic / emergency mode
9.6 Test mode for central battery emergency luminaires
9.7 Burn-in mode
9.8 Operating mode hierarchy
.......................................................
...................................................................
...........................................................
.............................................................................
43
45
49
52
8. DALI maintenance and expansion
9. Different operating modes
10. Analysis and service functions
11. Scenes and effects
7.2.3 ECG and lamp faults during DALI commissioning in 'Extended Mode'
....................... 52
11.1.1 Scene programming via the scene website
KDA-64 Instruction Manual
Content
..............
........................................................................
......................................................................................
....................................................
.............................................................
..................................................................................
................................................................................
.................................................................
...........................................
....................................................................................
.........................................
....................
...................................
............................................
..............................................
.................................
.............................
............................................
..............................
.............................
.............................
.........................................
...............
53
55
59
61
72
77
83
59
67
60
70
55
72
73
74
75
76
78
80
81
83
84
57
11.2 The effect module
12.1 Features
13.1 General communication objects
14.1 Device: General settings
14.2 ECG No. xx
14.3 Group No. xx
12.2 Converter inhibit mode
13.2 ECG-related communication objects
12.3 Test mode
13.3 Group-related communication objects
..........................................
...............................................
...................................................................
58
61
72
12. Self-contained battery emergency lamps
13. ETS communication objects overview
14. ETS parameter overview
11.1.2 Scene programming via ETS in 'Extended Mode
11.2.1 Effect programming using the effect website
14.1.1 Parameter page: General Settings
14.1.2 Parameter page: IP Settings
14.1.3 Parameter page: Behaviour
14.1.4 Parameter page: Special Functions
14.1.5 Parameter page: Analysis and Service
14.2.1 Parameter page ECG No. xx
14.2.2 Parameter page: Emergency Settings
14.2.3 Parameter page: Switching Behaviour
14.2.4 Parameter page: Analysis and Service
14.3.1 Parameter page: Group No. xx
11.2.2 Effect programming via ETS in 'Extended Mode'
KDA-64 Instruction Manual
Content
.............................
.............................
85
87
.............................................................
...........................................................
87
88
15. Firmware version and update
16. Reset to conditions at delivery
14.3.2 Parameter page: Switching Behaviour
14.3.3 Parameter page: Analysis and Service
1
1. Using the application program
Product family: Lighting
Product type: Gateway
Manufacturer: Mean Well
Name: KDA-64
2. General product information
2.1. DALI Bus system properties
The cross-functional DALI-Bus (DALI = Digital Addressable Lighting Interface) is a
system used to control electronic ballasts (ECGs) in lighting technology. The
specifications of the DALI communications interface are set in the international
norm IEC 60929.
The DALI Bus enables the receipt of switch and dim commands. In addition, the
DALI can be used for the notification of a fault status such as light or ECG failure or
for other light status information. In line with the latest DALI standard, devices with
emergency light function (EN 62386-202) are also supported. Status and operating
mode of emergency lights can be monitored and different prescribed testing
procedures can be performed.
Via the connected control device / gateway (Master), up to 64 individual DALI ECGs
(Slaves) can be connected in a DALI segment. When the DALI is commissioned, the
ECGs receive an automatically generated 3byte long address. Based on the long
address a short address between 0 and 63 is assigned during the further
commissioning process. As the address assignment is automatic, the device order
is random. The individual ECGs/lights therefore need to be identified during the
further commissioning process (see below).
The addressing of individual ECGs in the system is either based upon the short
address (individual addressing) or upon a DALI group address (group addressing).
For this purpose, any number of ECGs within a segment can be assigned to up to 16
groups. The group addressing in the DALI system guarantees that switch and dim
processes of different lights within a system are performed simultaneously without
imposition of time delays.
In addition to short and group addresses, the light values of individual DALI ECGs
can also be merged into scenes and addressed via scene addresses.
For a detailed description of the DALI system, please see the DALI handbook at
https://www.digitalilluminationinterface.org/
2.2. KDA-64 product features
The KDA-64 is a device used to control ECGs with a DALI interface via the KNX
installation bus. The device transforms switch and dim commands from the
connected KNX system into DALI telegrams and status information from the DALI
bus into KNX telegrams. The KDA-64 is a Category 1 device (in accordance with EN
62386-103). This means the device must only be used in DALI segments with
2
connected ECGs and not with other DALI control devices within the segment (no
multi-master function).
Power supply for the up to 64 connected ECGs comes directly from the KDA-64. An
additional DALI power supply is required and permitted.not not
The device comes in a 4TE wide DIN Rail casing so it can be directly integrated into
the mains distribution box.
In addition to the pure gateway functions, the
KDA-64 offers numerous additional features:
● Addressing of 16 DALI groups and/or individual addressing of up to 64 ECGs
● Flexible DALI commissioning concept: directly on the device or via the integrated
web server
● Different operating modes for groups and ECGs such as permanent mode, night-
time mode or staircase mode
● Burn-in mode for each individual light with specific burn-in time settings
● Integrated reader to count the operating hours of each light with an alarm to signify
the end of its life span
● Individual fault recognition with objects for each light/ECG
●Complex fault analysis at group and device level with number of faults and
calculation of fault rates
● Fault threshold monitoring with individually adjustable threshold values
● Scene module for extensive scene programming of groups and individual ECGs
● Effect module for sequence control and light effects
● “Quick exchange function“ for the quick and easy replacement of faulty ECGs
● Test mode for centrally powered emergency light systems
● Support of self contained emergency ballasts-
3
● Support of testing procedures for emergency lights with date and time stamp
●Integrated web server with extensive commissioning and maintenance
possibilities
● Integrated “visualisation“ via web-browser for direct control and display
3. General properties of the ETS application program: KDA-64
3.1 Installing the Plug-In
The application for the KDA-64 is based on a powerful KNX communications stack
of the System-B type. It is designed as plug-in for ETS-3 ETS-4, and ETS-5. The,
plug-in design means that an additional installation process is necessary. All
program files that are required are automatically set up when you import the
corresponding ETS product file (knxprod file).
After the import the product can be integrated as usual into the ETS. When you first
load the product in the ETS, you need to start the installation of the required plug-in
files by pressing the 'Next' button.
If it didn't pop-up pulg-in setup window during importing KDA-64.knxprod file, you
may find plug-in install as following example:
- Drag KDA-64 into the project e.g. Dining room
- Roll down dining room tab , find “1.1.1 KDA-64”
- Right click “1.1.1 KDA-64”, select “Plug-in” to install plug-in program.
4
And follow the instructions:
If the installation has been successful, a notification window appears.
5
And, „open product specific parameter dialog“ is able to be used in parameter tab. If
plug-in didn't be installed properly, this function is not available. Later on we will
discuss more about parameter.
Attention: The PC must have .NET Version 4.0 as a requirement for the installation.
Normally the framework exists on any modern PC. Should an older version of .NET
be installed or no version at all, you need to update .NET first. Please see the
Microsoft website for the required setup.
3.2 Principal structure of the Plug-In
The KDA-64 is a high-functionality product and accordingly offers many different
setting options within the parameters. To make the overview of the parameters as
simple and transparent as possible for the system integrator, there are more
operating levels than with a standard ETS application.
Indice
Altri manuali Meanwell Portale
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
