Medel RONDO Manuale utente
RONDO®
Single-Unit Audio Processor
Quick Guide
2
Table of Contents
Basic Assembly .................. 2
Indicator Lights.................. 4
FineTuner ...................... 6
Conguring the FineTuner .......... 8
FineTuner Light Patterns .......... 10
Batteries...................... 11
Telecoil Accessories.............. 12
Mini Battery Pack ............... 14
Assistive Listening Devices ....... 16
Accessories.................... 18
Basic Care and Maintenance ....... 20
Troubleshooting ................ 22
1
RONDO Single-Unit Audio Processor
Indicator Lights
Attachment Clip Fixture
(Available on both sides)
Microphone/
Microphone Cover
Battery
Pack
Switch Release Lever
Air Inlet
Control Unit
UnlockedOFF/
Locked
ON
2
Install and lock
the magnet into
the control unit.
Insert the batteries
with positive (+)
poles facing out.
Ensure the switch is set
to the unlock position.
Hold down the release
lever while setting the
switch to unlock position.
The switch must always
be in the unlocked
position ( ) prior
to attaching to the
control unit.
Installation
Unlock
Lock
MED-EL strongly recommends
that you don’t change the
magnet yourself. Contact your
clinician to have the magnet
changed or if you experience
any skin irritation.
Release
Lever
Basic Assembly
RONDO
1 2
3
3
Slide the battery pack
into the control unit
1,push down 2, and
slide the switch to
locked position ( ).
Note the mechanism
that secures the control
unit to the battery pack.
Hold down the
release lever.
Slide the switch to
unlock position ( )
and lift the battery
pack up.
Opening the Battery Pack
Removing Batteries
The bottom side of
the control unit can
be used to easily lift
batteries out of the
battery pack.
11
22
4
1
2
4
Indicator Lights
RONDO
Conrmation Status
FineTuner command has been
successfully received.
Program Change
Program 1 is selected.
Program 2 is selected.
Program 3 is selected.
Program 4 is selected.
Status
If the optional status light has been activated:
OPUS/RONDO is initialized and working.
Scale in Seconds
10 2 3
5
Warning Status Solution
Batteries are empty. Change the batteries.
Either minimum or maximum
setting of volume or
sensitivity range has been
reached.
Adjust volume or sensitivity
if necessary.
Eror Pattern Problem Solution
Temporary error or electronic
malfunction.
1. Turn processor off.
2. Turn processor back on.
The setting you selected has
not yet been programed, or
there has been a program
malfunction.
Select another setting.
Temporary error or
electronic malfunction.
1. Turn processor off.
2. Turn processor back on.
Programming failure,
temporary error, or
electronic malfunction.
1. Turn processor off.
2. Turn processor back on.
Scale in Seconds
10 2 3
6
Sensitivity
Input Selection
Processor Selection
(For Bilateral Users)
and Keypad Lock
Feature
Volume
Program
Selection
Indicator Lights
Default Volume
and Sensitivity
1
2
3
4
5
6
Volume
Increase or decrease the volume
Program Selection
Choose a program
Default Volume and Sensitivity
Set volume and audio sensitivity
to default setting as determined
by your audiologist
Sensitivity
Increase or decrease the audio
sensitivity
Input Selection
M: Selects the microphone
MT: Selects microphone
& telecoil
T: Selects the telecoil
Processor Selection (For Bilateral Users)
Select the left processor, both
processors, or the right processor;
Activates and deactivates the
Keypad Lock
1
2
3
4
5
6
FineTuner
RONDO
7
FineTuner Keypad Lock
To prevent accidental setting changes,
you can activate the FineTuner
Keypad Lock. If any key is pressed
while the keypad is locked, the red
LED light on the FineTuner will blink.
Temporarily Unlocking the Keypad
You can make a selection even when
the keypad is locked by pressing any
given key twice. The rst click
temporarily unlocks the keypad, and
the second click sends the command.
When the Keypad Lock is
temporarily deactivated, the
keypad will relock after 10
seconds of inactivity.
Activating the Keypad Lock
1. Press and hold the ( ) key for
5 seconds, or until the red and
amber lights blink alternately.
2. Press the ( ) key. When the
keypad has been locked
successfully, the amber lights
will blink.
Deactivating the Keypad Lock
1. Press the ( ) key twice. The
second time, press and hold
for at least 5 seconds, or until
the red and amber lights blink
alternately.
2. Press the ( ) key. The amber
lights will blink to indicate that
your FineTuner is unlocked.
Any FineTuner key can be deactivated by your
clinician to prevent accidental setting changes.
8
FineTuner
CONFIGURING THE
Once synchronized, the RONDO and Fine Tuner
remain synchronized until one of the two pieces
of equipment needs to be changed. It should
only occasionally be necessary to synchronize
the FineTuner and audio processor. Examples
include use of a back-up audio processor or
second FineTuner.
Altri manuali per RONDO
2
Indice
