Media 22E-24E Manuale utente

USE AND MAINTENANCE MANUAL

MEDIA 22E-24E

ED. 07-2010 EN

Doc. 10025342

Ver. AB

Le descrizioni contenute nella presente pubblicazione non si intendono impegnative.

L’azienda pertanto, si riserva il diritto di apportare in qualunque momento, le eventuali

modifiche ad organi, dettagli, forniture di accessori, che essa ritiene convenienti per un

miglioramento o per qualsiasi esigenza di carattere costruttivo o commerciale.

La riproduzione anche parziale dei testi e dei disegni, contenuti nella presente

pubblicazione, è vietata ai sensi di legge.

L’azienda si riserva il diritto di apportare modifiche di carattere tecnico e/o di dotazione. Le

immagini sono da intendersi di puro riferimento e non vincolanti in termini di design e

dotazione.

Simbologia utilizzata nel manuale

Simbolo del libro aperto con la i:

Indica che bisogna consultare le istruzioni per l’uso

Simbolo del libro aperto:

Indica all’operatore di leggere il manuale d’uso prima di utilizzare la

macchina

Simbolo di avvertimento

Leggere attentamente le sezioni precedute da questo simbolo, per la

sicurezza dell’operatore e della macchina

Simbolo di smaltimento

Leggere attentamente le sezioni precedute da questo simbolo, per lo

smaltimento della macchina

SUMMARY

ON CONSIGNMENT OF THE MACHINE....................................................................................................................4

INTRODUCTORY COMMENT.....................................................................................................................................4

TECHNICAL DATA......................................................................................................................................................4

SYMBOLOGY USED ON THE MACHINE...................................................................................................................5

SYMBOLOGY USED IN THE MANUAL......................................................................................................................7

MACHINE PREPARATION..........................................................................................................................................8

1. HANDLING OF THE PACKED MACHINE.............................................................................................................................8

2. HOW TO UNPACK THE MACHINE.......................................................................................................................................8

3. MAINS CONNECTION ..........................................................................................................................................................8

4. SQUEEGEE ASSEMBLY ......................................................................................................................................................9

5. ADJUSTMENT SQUEEGEE HEIGHT...................................................................................................................................9

6. ADJUSTMENT SQUEEGEE INCLINATION..........................................................................................................................9

7. ADJUSTMENT SQUEEGEE PRESSURE...........................................................................................................................10

8. SPLASH GUARD COVER...................................................................................................................................................10

9. BRUSH ASSEMBLY.............................................................................................................................................................10

10. RECOVERY TANK............................................................................................................................................................11

11. OUTER FILTER.................................................................................................................................................................11

12. SOLUTION WATER............................................................................................................................................................11

GENERAL RULES OF SECURITY............................................................................................................................12

PERFORMANCE........................................................................................................................................................13

SETTING FOR WORK .............................................................................................................................................................13

MOVEMENT ............................................................................................................................................................................14

BRAKE......................................................................................................................................................................................14

DEVICE TOO FULL .................................................................................................................................................................14

CIRCUIT BREAKER.................................................................................................................................................................15

BRUSH PRESSURE.................................................................................................................................................................15

ON COMPLETION OF THE WORK...........................................................................................................................16

DAILY MAINTENANCE .............................................................................................................................................17

CLEANING RECOVERY TANK ...............................................................................................................................................17

CLEANING SUCTION FILTER.................................................................................................................................................18

CLEANING SOLUTION FILTER...............................................................................................................................................18

CLEANING OF THE SQUEEGEE ............................................................................................................................................18

REPLACEMENT REAR SQUEEGEE RUBBER.......................................................................................................................18

REPLACEMENT FRONT SQUEEGEE RUBBER.....................................................................................................................19

DISASSEMBLY OF THE BRUSH ............................................................................................................................................19

WEEKLY MAINTENANCE.........................................................................................................................................20

CLEANING OF THE SQUEEGEE HOSE.................................................................................................................................20

CHECK BRAKE........................................................................................................................................................................20

TROUBLE SHOOTING GUIDE..................................................................................................................................21

INSUFFICIENT WATER ONTO THE BRUSH..........................................................................................................................21

THE MACHINE DOES NOT CLEAN SATISFACTORILY.........................................................................................................21

THE SQUEEGEE DOES NOT DRY PERFECTLY ...................................................................................................................21

EXCESSIVE FOAM PRODUCTION.........................................................................................................................................21

CHOICE AND USE OF BRUSHES............................................................................................................................22

EC DECLARATION OF CONFORMITY....................................................................................................................23

On consignment of the machine

When the machine is consigned to the customer, an

immediate check must be performed to ensure all the

material mentioned in the shipping documents have

been received and moreover to find out that the machine

has not suffered damage during transportation. If

damage has occurred, get the shipping agent to verify

immediately the amount and nature of the damage

suffered and at the same time inform our claim

department. It is only by prompt action of this type that

compensation for damage may be successfully claimed.

Introductory comment

This is a floor cleaning machine which, using the

mechanic abrasive action of a rotary brush and the

chemical action of a solution water-detergent, is able to

clean any type of floor, picking up during its advance

movement, the removed dirt and the detergent solution

which has not been absorbed from the floor.

The machine must be used only for such purpose.

We would impress upon you that any machine will

function efficiently and operate successfully, only if used

correctly and maintained in fully efficient working order.

We therefore suggest you to read this instruction booklet

carefully and re-read it whenever difficulties arise in the

course of machine use. Our Service Department is at

your disposal for all such advice and servicing as may

prove necessary.

MEDIA 22E MEDIA 24E

TECHNICAL DATA U.M. 10200041 10200045 11100041 11100045

Voltage/Frequency V/Hz 230/50 220/60 230/50 220/60

Cleaning width mm 540 540 610 610

Squeegee width mm 800 800 900 900

Working capacity, up to sqm/h 1890 1890 2135 2135

Brush diameter mm 540 540 610 610

Brush speed rpm 140 140 140 140

Brush pressure, up to kg 45 45 45 45

Power brush motor and traction W 750 750 750 750

Drive aut. aut. aut. aut.

Movement speed km/h 0÷3,5 0÷3,5 0÷3,5 0÷3,5

Max. gradient 10% 10% 10% 10%

Power suction motor W 550 550 550 550

Suction vacuum mbar 150 150 150 150

Solution tank l 60 60 80 80

Recovery tank l 70 70 85 85

Machine length mm 1420 1420 1500 1500

Machine height mm 1085 1085 1085 1085

Machine width (without squeegee) mm 590 590 650 650

Machine weight (empty) kg 126 126 140 140

Acoustic pressure level (conf. with EN dB (A) 70 70 <70 <70

Vibration level m/sqs 1,89 1,89 1,89 1,89

Input cable m 20 20 20 20

SYMBOLOGY USED ON THE MACHINE

0 / 1

Indicates the general switch

Indicates the warning light for the presence of the voltage

Symbol denoting cock

Indicates the cock lever

Indicates the solenoid valve switch

Symbol denoting up-down brush base

Indicates the lever of the brush base lifting

Symbol denoting brush

Indicates the switch of the brush motor

Symbol denoting suction motor

Indicates the switch of the suction motor

Symbol denoting up - down of the squeegee

Indicates the squeegee lever

Symbol denoting the reset of the safety switch

Symbol denoting brake

It is used on top of the emergency and parking brake lever

SYMBOLOGY USED ON THE MACHINE

Indicates the exhaust pipe of the recovery tank

Indication of the maximum temperature of the solution detergent

Placed near the charging hole of the solution tank

Symbol denoting the coupling

Indicates the anchor points and the load direction

Symbol denoting the open book

Indicates that, the operator has to read the manual before the use of the machine

SYMBOLOGY USED IN THE MANUAL

Symbol denoting a warning

Read carefully the sections preceded by this symbol, for the safety of the operator and of the

machine

MACHINE PREPARATION

1. HANDLING OF THE PACKED MACHINE

The machine is packed in a specific package provided on a pallet for the

handling with fork trucks. Do not place more than two packages on top of

each other. The total weight is 171 kg for Media22E and 185 kg for Media24E.

The overall dimensions are:

Media 22E Media 24E

A: 1280 mm A: 1280 mm

B: 760 mm B: 760 mm

C: 1520 mm C: 1520 mm

2. HOW TO UNPACK THE MACHINE

1. Take off the outer package

2. The machine is fixed on the pallet with wooden wedges which block the

wheels and with metallic brackets

3. Take off the brackets and the wedges

4. Using a chute, get the machine down from the pallet, pushing it in reverse

motion. Avoid violent blows to the base and to the squeegee support

5. Keep the pallet for eventual transport necessities

3. MAINS CONNECTION

Before the working operation, check the tension and the frequency of the

electrical system, to which the machine has to be connected, paying attention

that, these ratings correspond to the data indicated on the machines' plate.

MACHINE PREPARATION

4. SQUEEGEE ASSEMBLY

The squeegee, which is packed separately from the machine, should be

assembled as shown in the figure. Insert first the left squeegee pin (1) in the

left arm slot, then the right pin (2) into the right slot, paying attention to keep

the spring and the washer over the blade of the arm itself. To simplify this

operation the handwheel placed on top of the pin should be loosened

previously. Afterwards, lock the handwheel to block the squeegee in position.

Fit the squeegee hose into its coupling (3) 2

5. ADJUSTMENT SQUEEGEE HEIGHT

The squeegee has to be regulated in height depending on the wearing of the

rubbers. To adjust this, rotate the knob (1) of each wheel clockwise to lift the

squeegee and counterclockwise to lower it.

Note: The right and left wheels must be adjusted at the same amount so that

the squeegee works in parallel to the floor.

6. ADJUSTMENT SQUEEGEE INCLINATION

During working operation, the rear rubber has to work slightly tilted backwards

and this equally in its whole length for about 5mm. Should it be necessary to

increase the rubber bending in the central part, tilt the squeegee body

backwards and turn the adjuster (1) counterclockwise. If the rubber bending is

to be noticeable at the sides of the squeegee, turn the adjuster clockwise. At

the end of the adjustment, block the adjuster nut.

MACHINE PREPARATION

7. ADJUSTMENT SQUEEGEE PRESSURE

The squeegee is already loaded with an appropriate pressure. It is possible to

adjust the squeegee pressure through the register (1) shown in the figure. In

order to increase pressure, it is necessary to tighten the register. To decrease

pressure, it is necessary to unscrew the register.

8. SPLASH GUARD COVER

The cover, which is packed separately, has to be assembled as shown in the

figure. Assemble the cover inserting it onto the arms, tighten the knobs (1)

with the washers.

9. BRUSH ASSEMBLY

1. Lift the brush base acting upon the lever (1)

2. Turn the key into position O. To carry out the operations of brush assembly

with connected current can cause damages to the hands.

3. Insert the brush placing it under the brush base, in correspondence of the

plate.

4. Lower the brush base, turn the key into position I, press the motor switch

(3), press the movable handle bar.

Now the brush is coupled.

ATTENTION! During this operation make sure that, there are not

any objects or persons close to the brush.

5. Adjust, through the knob (1), the height of the splash guard rubber so that

it does not touch the floor.

The adjustment has to be repeated regularly depending on the brush wear

Indice

Manuali Macchina per pavimenti popolari di altre marche

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Manuale utente

Numatic

Numatic ET 4045 Manuale utente

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Manuale utente

Mytee

Mytee 8070 Mytee-Lite Manuale utente

Kärcher

Kärcher B 140 R Manuale utente

Triple S

Triple S Ace 26T1 Manuale utente

Nilfisk-Advance

Nilfisk-Advance SW 750 Manuale utente

Tornado

Tornado Marathon 2000 98190 Manuale

Windsor

Windsor ADMIRAL Admiral 8 Manuale utente

Numatic

Numatic TTB 1117/100 Manuale utente

Tennant

Tennant 8210D Manuale utente

Nobles

Nobles Frontier Manuale del prodotto

lavina

lavina 21-X Manuale utente

KENT

KENT Edge 28B Manuale utente

Tennant

Tennant 215 Manuale del prodotto

Windsor

Windsor BDP 51/2000C Manuale utente

CleanFreak

CleanFreak DURA-18HD Manuale utente

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Guida per l'amministratore