MediaTech MT4092 Manuale utente
User Manual
SLIDE
SCANNER
MOBILE FILM & SLIDE SCANNER
MT4092
2
EN Index
Welcome.........................................................................................2
Precaution......................................................................................2
Preparation ....................................................................................3
Standard Accessories.................................................................3
Part Names ................................................................................3
Installing the Battery Pack ...................................................4
Charging the Battery Pack ...................................................4
Place Film / Slide Into The Holder..........................................5
Using the Digital Image Copier .............................................6
Playback Mode.............................................................................8
Delete Mode..................................................................................9
To Link the Card to Computer.................................................9
Viewing Images from TV.........................................................10
Edit The Pictures ........................................................................11
Appendix......................................................................................15
Icons & Indicators......................................................................15
PC System Requirements ......................................................16
Mac System Requirements ....................................................16
Precaution
Before using Digital Image Copier, please ensure that
you read and understand the safety precautions de-
scribed below. Always ensure that the Digital Image
Copier is operated correctly.
¯Never operate Digital Image Copier inside of an
aircraft or anywhere else where operation of such
devices is restricted. Improper use creates the risk of
serious accident.
¯Do not try to open the case of Digital Image Copier
or attempt to modify Digital Image Copier in any
way. High-voltage internal components create the
risk of electric shock when exposed. Maintenance
and repairs should be performed only by authorized
service providers.
¯Keep Digital Image Copier away from water and oth-
er liquids. Do not use Digital Image Copier with wet
hands. Never use Digital Image Copier in the rain or
snow. Moisture creates the danger of re and electric
shock.
¯Keep Digital Image Copier and its accessories out
of the reach of children and animals to prevent ac-
cidents or damage to the Digital Image Copier.
¯If you notice smoke or a strange odor coming from
Digital Image Copier, turn the power o immediate-
ly. Take Digital Image Copier to the nearest author-
Welcome
Thank you for purchasing a Digital Image Copier.
Please take a moment to read through this manual. Its
contents will send you on an educational journey into
your recorder multiple capabilities.
3
EN
ized service center for repairing. Never attempt to
repair Digital Image Copier on your own.
¯Use only the recommended power accessories. Use
of power sources not expressly recommended for
Digital Image Copier may lead to overheating, dis-
tortion of the equipment, re, electrical shock or
other hazards.
¯Digital Image Copier may become slightly warm
during use. This does not indicate malfunction.
¯If the exterior of Digital Image Copier needs clean-
ing, wipe it with a soft, dry cloth.
Preparation
Standard Accessories
¯Digital Image Copier
¯Quick Guide
¯CD
¯Slide Holder
¯135 Negative Holder
¯110 Negative Holder (Optional)
¯Clean brush
¯Adaptor
¯USB cable
¯TV cable
¯Lithium Battery (Optional)
Part Names
Film Type/Up button
OK/Copy button
Power Led
Film/Slide
Holder Slot
Battery cover
USB connector
TV out connector
Playback mode
Flip/Delete
Down button
Power ON/OFF
Liquid Crystal
Display (LCD)
SD card slot
4
EN Brush
135 Slide holder
135 Negative holder
110 Negative holder (optional)
Note: We suggest using bundled brush to insert into
the Digital Image Copier slot and clean the glass sur-
face periodically to produce a clear image. Please make
sure your lm negatives/mounted slides and cover
trays are clean before inserting into the Digital Image
Copier as well. Dust or dirt from the negatives and cov-
er trays will aect the quality of your scanned images.
Charging the Battery Pack
The battery pack is not charged at the time of purchase
and therefore needs to be charged before use. If the
battery charge becomes low while you are using the
copier, it is recommended to recharge it as soon as pos-
sible.
Installing the Battery Pack
1. Open the battery compartment cover by lightly
pressing and sliding it back as shown.
2. Insert the supplied battery. Make sure the battery
label is facing upwards and the (+ and -) ends of the
battery match to the polarities indicated in the bat-
tery compartment.
3. Snap the cover back into place.
Battery power status
5
EN
1.
Insert the battery pack into the battery compartment
2. You may charge the battery in 2 ways:
(a) Plug the USB mini B of the supplied USB cable to
the USB port of the copier, and plug the other USB
end into the USB port of your computer/notebook.
Please charge the battery at least 5.5~6 hours prior
to your rst use.
3. Red LED will light on during charging. When the bat-
tery pack is fully charged, the red LED light will be o
and you may disconnect the charging connections.
Status LED:
Red: The Image Copier is OFF, the battery is charging.
Purple: The Image Copier is ON, the battery is charged
simultaneously.
Blue: The Image Copier is ON, the battery is not charg-
ing or no battery is loaded.
(b) Plug the USB mini B of the supplied AC adaptor
(optional) to the USB port of the copier, and plug the
adaptor to the
power outlet.
Please charge the
battery at least
2.5~3 hours.
2. Put a 135 positive slide/negative lm/110 negative
into holder as shown.
3. Close the holder and please make sure the holder
close properly.
Place Film / Slide Into The Holder
1. Keep the glossy surface in the upward direction.
Open the negative/ positive slide holder as Illustrated.
6
EN Using the Digital Image Copier
1. Insert SD card into the SD card slot rst.
2. Press Power button to
power on. Press Power
button to power o if
you do not want to use
the Image Copier.
3. Insert the loaded lm/ slide holder properly into the
slot according to the ፖor Þsign shown on the Im-
age Copier and lm holder.
(Insert through front entrance)
(Insert through rear entrance)
7
EN
4. To select lm type on the screen.
Press Film Type Button for selection.
You can adjust the location of the lm by moving the
lm holder; the lm holder can be moved in both di-
rections.
Keep your picture in the rectangular white frame, im-
proper adjustment of picture may copy the black edg-
es of the lm holder.
If the black edge of a slide lm is on top or bottom of
the LCD display, tilt the copier forward or backward will
eliminate the black edge.
You may crop away the black edges later by the soft-
ware.
Note: Improper selection of
Film type may not get good
result.
135 positive (slide)
135 negative
135 black & white
110 negative
5. Press Copy button to
convert picture to Dig-
ital image. To get the
best Digitize image wait
for the image display on
the LCD screen to adjust
the brightness until it
becomes stable. It nor-
mally take 3~4 seconds,
depending on the bright-
ness of your lm.
8
EN Note: For power saving the copier will automatically
turns to sleep condition if you are not using it for more
than 3 minutes. You may wake up the copier by press-
ing any one of the button.
If the copier is not using for more than 6 minutes it will
turn o automatically.
6. Moving the lm holder for next. 2. Press UP button to for-
ward reviewing.
Press DOWN button for
backward reviewing.
Playback Mode
1. Press Playback button for
playback Digital image.
7. Press Flip button to reverse image to 180 de-
grees. In case the slide is accidentally loaded into the
lm holder in an upside down direction.
9
EN
2. Turn power on.
3. Press the Up button to se-
lect “SD to PC” to YES, then
press the OK button for
conrmation.
4. To active bundled software-MediaImpression, the
images saved in SD card will be import to you com-
puter automatically for reviewing.
Please copy the images from SD card to the desig-
nated folder or album of your computer.
Delete Mode
1. Under Playback Mode
Press Delete button once
to delete current image.
2. Press Delete button twice
to delete all images.
3. Press Delete button three
times to format SD card.
To Link the Card to Computer
1. Plug the USB cable to copier and computer properly.
Note: Formatting SD card will
delete all the les in the card.
Download your les in the SD
card into your computer be-
fore the SD card is formatted.
10
EN Note: Bundled MediaImpression is only for images ed-
iting purpose.
The Acquire function is for Film Scanner/ Photo Scan-
ner without TFT display.
Viewing Images from TV
1. Set TV to video mode, and plug the TV cable to copi-
er and TV set properly. Turn power on.
2. Press Playback button for viewing image on TV.
3. Press UP button to forward reviewing.
Press DOWN button to backward reviewing.
Indice
