MediaTech MT4050 Manuale utente

User Manual

INDOOR

SECURECAM

300K

MT4050

Notice �� 3

Product introduction............................................................. 3

Product summary�� 3

Main features �� 3

Package for typical production �� 4

Overview ................................................................................ 4

Installation guide .................................................................. 5

Wired connection to LAN �� 5

Connecting camera to local WiFi�� 6

Connecting camera to Internet network�� 7

Operation Steps:��7

Operation of IE browser ........................................................ 8

View video�� 8

1� Audio, Talk, Record, Snapshot ��8

2� Multipicture change button ��8

3� Viewing control area��8

4� Setting device parameters ��9

Device information�� 9

Device status��9

Device alias setting��9

Device date and time setting��9

Local recording path��9

Device web setting�� 9

Basic network settings ��9

Manufacture’s DDNS setting �� 10

Third party DDNS setting �� 10

UPnP settings�� 10

Index Alarm Settings��10

Alarm service setting �� 10

Mail Service Setting�� 11

FTP Service Setting�� 11

Alarm log�� 12

User and device setting��12

Multi-device Setting�� 12

User Settings�� 12

PTZ settings�� 12

Maintain�� 12

Visiting device by other software��13

Other web browser�� 13

Mobile phone software�� 13

Notice

■Keep away from the places for high-temperature, heat source and

direct sunlight;

■Keep away from water and when get wet, cut o the power im-

mediately�

■Avoid using at damp environment; the reference range for opera-

tion humidity is below 85%RH�

■Operation temperature is -10° ~ +50°

■Please install it horizontally or wall mounting, avoid vibration

places and do not put other equipment onto the item�

󰌦

1� Please check the power supply before proceeding�

2� Be careful not to bang the camera or subject it to strong impacts

or shocks�

3� Do not directly touch the optical components for the image sen-

sor, if necessary, please place a clean and moistened cloth with

alcohol and wipe the dirt gently; When not in use, please place

the dust cover on to the item to protect the image sensor�

4� Do not aim the camera directly into the sun or at other intense

light sources that could aect the image quality (it is not the

problem for the ip camera), also shorten the service life for the

image sensor�

5� Keep away from laser when it is working, otherwise the image

sensor can be damaged�

6� If the equipment is not working properly, please contact the store

or the service center, do not disassemble or modify the equip-

ment in any way� Unauthorized modication or repair will void

warranty�

Product introduction

Product summary

Thank you for choosing our securecam camera series, the

IP Camera combines a high quality digital video camera

with network connectivity and a powerful web server to

bring clear video to your desktop from anywhere on your

local network or over the Internet� It is very suitable for

family, shops, oce building and so on�

Main features

■The video is compressed by MJPEG� You can select VGA/

QVGA/QQVGA video resolution;

■Infrared LED for night vision covers 5m area, to maintain

24 hours monitoring;

■Support WiFi 802�11b/g protocol, can build up wireless

monitoring;

■Support motion detection, send alarm information by

email and FTP;

■Support mobile phone to view;

■Built in web server, all data is transferred through one

port; it is easy for user to do the network setting;

■Attached a label at the bottom of each IP Camera, it in-

clude DDNS address� When IP Camera is connected to

the internet, this URL can be used to visit the device;

■Special software included for multi-view, long time re-

cording, video playback etc;

Package for typical production

■Power adaptor, ■CD, ■Cable,

■Bracket L, ■Antenna

Notice: Please check carefully if all listed items are included in the pack-

age, if anything missing, please contact your vendor�

Overview

The camera adopts 300K pixels CMOS sensor, 3�6mm lens, built in PTZ and MIC, 8 IR LEDs, audio out socket� It uses 5V

power adaptor�

IR LED

Work status LED

Power status LED

MIC

Lens

Photoresistor Antenna

Power RJ45 Audio Out

Alarm In

Alarm Out

Reset Audio In

Installation guide

Wired connection to LAN

Power on the IP camera, connect IP camera to router by

network cable, meanwhile, connect computer to the same

router�

It will pop up user login dialog, enter default user name

“admin” and password “123456” to login the camera�

We suggest using IE browser to view the video it can pro-

vide more functions, but user needs to install video player

before viewing the video� Click “OCX Download ” to down-

load OCX and install it� If you use other internet browser

you may not have access to all function of camera�

MT4050

Router

Insert CD to computer driver, double click“LSearch_en�exe”

in the CD, run the software, click “Search”, select the device

searched (this process may take up to 5min), click “Browse”

to open browser (you can also manually enter address, in ex-

ample below it will be http://192.168.100.245).

Notice:

■If you installed the rewall software in your PC, when

you run the LSearch_en�exe, it may pop up a window

to say “whether you want to block this program or not”,

then you should choose not to block�

■You can hold on reset button on the camera for 10 sec-

onds to restore factory default if you forget user name

and password, during the process, don’t disconnect the

power, otherwise the camera maybe damaged�

Before connecting camera to router by WiFi, please con-

nect via LAN as shown earlier and enter WiFi setting, and

then operate as the following step�

Click the “Scan” button, it will show you all detected wire-

less networks� Select one of them and tick “Using Wireless

Lan”, then the relevant data of the selected wireless net-

work will be shown in the following blanks� Input the pass-

word and click “Submit”, then the WiFi setting is nished�

Unplug the cable, camera will be connected to router by

WiFi automatically�

Notice: When the device is connected both WiFi and wired,

it will rstly connect to the wired network� If the camera

enables DHCP to obtain IP address automatically, so the IP

address is not same in wired connection and WiFi connec-

tion, recommend to set xed IP address for the camera�

Connecting camera to local WiFi

You can connect the camera to your local router by wire-

less connection�

MT4050

Connecting camera to Internet network

You should connect WiFi router to WAN (ADSL modem or

other router with internet access) as shown below�

If you want to access your IP camera from WAN (when you

do not have access to local network), you must make a

port forwarding on the router�

Example of forwarding port “1025” for camera with local address of

“192.168.178” using “Netgear router”.

Operation Steps:

1� After login the interface of the router, choose “Port For-

warding”;

2� Choose “Add custom Service”;

3� Input IP camera http port;

4� Input IP address of IP camera, click “Apply”�

After nishing the port forwarding, you can use WAN IP ad-

dress to visit the camera by remote computer�

Notice: because the routers are dierent, so the interface

and setting method of router are also dierent, please refer

to the user manual of your router or consult with router

manufacturer�

Operation of IE browser

View video

After installing the plug-ins, click “Mode 1 to view” to view

the video�

1. Audio, Talk, Record, Snapshot

You can click these buttons 1to perform audio, talk, re-

cord and snapshot functions�

Audio – enable/disable capturing sound

Talk – when you plug speakers to camera you can use mi-

crophone in PC computer and send your voice message

online�

Record – you can start recording video (it requires prior

denition of storage in one of PC computers in local net-

work)�

Snapshot - you can save snapshot (web browser will enter

snapshot in new window)�

Call – recall previously stored camera position�

Set – save actual camera position�

Note: about recording path, click 4button to enter set-

ting interface, you can set it in “Local Recording Path”�

2. Multipicture change button

If you add multi-devices it will connect other device to

display pictures automatically when changing to 4, 9 split

screen� In playing video area, you can select a picture to

control audio, talk, record, snapshot and PTZ control etc�

3. Viewing control area

You can control PTZ moving, picture reversal and mirror

etc� when viewing video, and can adjust picture param-

eters, includes resolution, brightness etc�

The camera supports 16 preset points, you can set one

place as preset point when moving the PTZ to a place, also

can call the preset point when the camera move to another

place, so the camera can return to set place�

Note: IR button can control work mode of IR LED� IR LED

may have auto, forced close two mode, the IR LED will pow-

er on or o according to environment light in auto mode;

the IR LED always power o in forced close mode�

4. Setting device parameters

Click 4button to enter setting interface, you can set all

parameters of the camera described later in this in manual�

Only administrator can login to set these parameters�

Device information

Device status

The user can obtain “Device rmware version”,”Web UI ver-

sion”, “Alias”, “AP MAC” etc�

Device alias setting

The user can name the camera, example for home, oce

etc�

Device date and time setting

You can enable “Sync with NTP Server” when the device

was connected to WAN, but need to select correct time

zone where the camera is located, otherwise need to se-

lect“ Sync with PC time”�

Remark: Please carefully check the camera time, so it can

be sure the alarm accuracy�

Local recording path

The camera will be automatically create a le folder named

“Record les”when the user don’t set“local recording path”

and launch recording directly, and then save recording le

to the folder�

Device web setting

Basic network settings

The user can also enter the Basic Network Settings to set

the IP address except using the search software “LSearch_

en�exe”�

Notice: Using the third party domain name, if the http port

is not 80, the port number should be adding to the domain

name with colon� Example: http://btest.dyndns.biz:81. Don’t

enter port number when you use manufacturer’s DDNS�

Third party DDNS setting

User can also use third party DDNS, such as www�dyndns�

com, User must apply a free domain name from this web-

site and ll the info into the below blanks and save the set-

tings� Then the domain name can be used�

Manufacture’s DDNS setting

Manufacturer puts a label of DDNS at the bottom of each

IP Camera, it is unique, the manufacturer has established

a DDNS system, and allotted a DDNS to every device, the

user only enter the website into browser, and then view it

from remote PC�

Remark: The router connected to camera need to enable

DHCP when the user uses“obtain IP from DHCP server”; the

routers enable DHCP by default�

UPnP settings

If you enable UPnP, once the IP camera is connected into

the LAN, it will communicate with the router in the LAN

and do the port-forwarding with open port of router au-

tomatically� You only tick “Using UPnP to Port Mapping” to

nish the setting�

Before using the UPnP function, please make sure the rout-

er’s UPnP function has been enabled� Not all the routers

support UPnP perfectly� Please test if the router works well

with the equipment, if not, we suggest you to disable this

function and do the port-forwarding manually�

Alarm Settings

Alarm service setting

If user need to monitor a xed area, when there is any mo-

tion, it will detect the motion and trigger the alarm� In the

motion detect sensibility, the smaller the value, the more

sensitivity�

After triggering the alarm, you can adopt several alarm

mode in armed time�

■Link to the Preset when alarming: need to set preset

point of the camera;

■Send alarm info by email (a email include a picture); ev-

ery alarm trigger a email;

Indice

Altri manuali MediaTech Telecamera di sicurezza

MediaTech

MediaTech MT4052 Manuale utente

MediaTech

MediaTech INDOOR SECURECAM HD MT4051 Manuale utente

MediaTech

MediaTech PENCAM MT4054 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente