Charging internal battery
Device has built-in rechargeable battery, it can work on itself power supply (switch R)
or work as power supply for other devices (switch C). To charger internal battery plug
USB cable to DC input socket, charger light will be on. After few hours charger light will
be o – battery is full. You can keep cable plugged in when working in normal mode
(switch R).
Using as power supply (power bank function)
Turn switch into C position and plug USB device to 3G modem/charging port. You can
always check battery level by pressing battery indicator button.
Using in normal mode
Turn switch into R posi-
tion. Open network con-
nection setup, right click
WiFi card icon, select
“properties” and then
“TCP/IPv4 properties”,
make sure that you are
using automatic con-
guration method when connect-
ing to WiFi network – both options
should be on “obtain IP address
automatically”.
