MEDIATEK NET-DYN Manuale utente

Installation Guide

NET-DYN USB Dual Band (Mediatek) Installation Guide

This manual is divided into three parts: Windows XP, Windows 7 / 8 / 8.1 /10, and

Mac

1 .Windows XP

Please do the following steps to set up the software on your computer:

Step 1. Once the wireless USB adapter has been plugged in to a USB port, the

following message will appear on screen. Click “Cancel”. (See picture below please)

(If it does not pop-up, skip this step)

Step 2. Please insert the disc into your CD-ROM drive. The disc should auto start,

displaying the following window. If it does not start due to the system settings, open

My Computer, find the Setup.exe file in the folder “windows” in your CD-ROM

directory.

If you do not have a CD-ROM Drive, you can download at netdynwifi.com

Step 3. Double click the “Setup.exe”file and the software will initialize. Then please

choose “I accept the terms of the license agreement”and click “Next”.

Here you have two options: “Install Driver and Mediatek WLAN Utility” or “Install

Driver Only”

With the WLAN Utility you will have software to manage your connections with. If

you choose to only install the drivers, you will use your regular utility provided by

Windows.

Step 4. Once you choose which option you prefer, continue the installation wizard

and finish it.

Step 5:

If You Chose “Install Driver Only”:

Step 5a. Click the icon in the Windows system tray, which is located in the

bottom-right corner of your computer screen. It pops up a message and double-click

the utility icon (or choose the SSID and click “connect”), enter the wireless network

key and click “connect”. Then you will have internet access.

If You Chose “Install Driver and Mediatek WLAN Utility”:

Now Choose between the “Mediatek Configuration Tool” or the “Microsoft Zero

Configuration Tool”. If you choose the “Mediatek Configuration tool, proceed with

Step 5b. If you choose the “Microsoft Zero Configuration Tool”, you have the option

to connect to the internet both ways 5a and 5b.

Step 5b.Double click the Icon in the Windows system tray, which locates in the

bottom-right corner of your computer screen and open the wireless networking

setup page as seen in figure 1. Click “Available Networks”and choose the wireless

networking you prefer on the right bar.

Double click wireless signal to open a page and click the ( ) next step button.

Enter the wireless networking key as seen in figure 5 and click the next step ( )

button. Now you will be able to connect to the internet.

2. Windows 7 / 8 / 8.1 / 10

This example uses Windows 7, but if you have Win 8 or 10, the steps are the same.

Step 1. Once the wireless USB adapter is plugged into a USB port, insert the CD and

locate Setup.exe in the folder “windows” in the disc directory. (If you do not have a

CD-ROM slot in your computer, please download the driver from netdynwifi.com)

Step 2. Double click on the Setup.exe file, then choose “I accept the terms of the

license agreement”. Click “Next”.

Here you have two options: “Install Driver and Mediatek WLAN Utility” or “Install

Driver Only”

With the WLAN Utility you will have software to manage your connections with. If

you choose to only install the drivers, you will use your regular utility provided by

Windows.

Step 3. Once you choose which option you prefer, continue the installation wizard

and finish it.

Step 4:

If You Chose “Install Driver Only”:

Step 4a. Click on the Icon in the Windows system tray, which is located in the

bottom-right corner of your computer screen and then double click the SSID you

preferred (or click “connect”button)

Open the wireless networking page and enter the security key. Click the “OK”button.

Then you should have internet access when you open a internet window with any

browser.

If You Chose “Install Driver and Mediatek WLAN Utility”:

Step 4b. Double click the icon in the Windows system tray, which is located in the

bottom-right hand corner of your computer screen, and click on the “Available

Networks” button (See figure 1). Open the right wireless list and choose wireless

signal (See figure 2) and double click.

Indice

Altri manuali MEDIATEK Adattatore

MEDIATEK

MEDIATEK MT7630E Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente