Medic Therapeutics 002-703 Manuale utente





Usage and Maintenance Instructions

Instruction Manual

N.B. This equipment must be installed by a competent person.

Do not exceed the weight limit stated - doing so could put the user at risk.

BEFORE USE

• Carefully remove all packaging. Avoid use of any knives or other sharp

instruments as they may damage the surface of the product.

•

Check the product for any visible damage. If you see any damage or suspect

a default, do not use your product and contact your supplier for support.

INTENDED USE

Your Walker has been designed to assist when walking and carrying small

items of shopping. The bag was designed specifically to fit your Walker,

please only use the supplied bag for your Walker. Do not use or combine

bags and/or baskets from other manufacturers.

When not in use, simply fold the Walker and store. The Walkers are designed

to be used both inside and outside the home.

ASSEMBLY INSTRUCTIONS

Carefully remove all packaging, including the cardboard tubes covering the

knurled tube part of the brake assembly. Check the product thoroughly for

damage or obvious faults.

If you suspect a default, please do not use, and contact your supplier

immediately for service.

COMPONENTS OF THE WALKER

1 Push handle

2 Brake lever

3 Front wheel folding mechanism knobs

4 Backrest

5 Mesh seat

6 Personal Item Bag

7 Rear wheel folding mechanism knobs

8 Front wheel

9 Rear wheel

10 Cane holder

ASSEMBLY PROCEDURE

PART 1 - UNFOLD YOUR WALKER

1. Undo hook & loop, remove rear wheel folding

mechanism knob. (Figure 1)

Rotate the rear wheel arms backward. (Figure 2)

3. Insert and tighten rear wheel folding

mechanism knobs firmly, ensuring proper

alignment.

4. Remove front wheel folding mechanism knobs.

(Figure 1)

5. Rotate the front wheel arms forward. (Figure 2)

6. Insert and tighten front wheel folding

mechanism knobs firmly, ensuring proper

alignment.

7. Pull the two push handles apart.

8. Open the frame until the crossbar locking

mechanism locks automatically, verify seat is

locked in place by pushing down on both seat

edges. (Figure 3)

Figure 3

Figure 1

Figure 2





ASSEMBLY PROCEDURE

PART 2 - FOLDING

Remove the accessories and lower down the

handle if necessary. Lift the crossbar locking

mechanism to release belt on the mesh seat

to release the crossbar lock. Fold the frame as

shown on left (Figure 4). Push the two push

handles together. Release the front and rear

wheel folding mechanism knobs and rotate

the rear wheel arms inward, replace folding

mechanism knobs and attach hook and loop to

rear legs.

PART 3

Adjusting the height level of the handles to fit

different users. Press the buttons for handgrips

and pull the handgrip upwards or downwards.

As the handle moves, release the buttons. This

automatically locks in the next possible height.

Repeat this process until the desired height is

reached. (Figure 5)

PART 4

Attach the bag to the hook of the seat frame.

The Personal Item Bag can be easily detached

when using. (Figure 6)

Figure 5

Figure 6

Figure 4

OPERATING THE BRAKES

1. To stop, gently apply a gripping pressure to

both brakes simultaneously (Figure 7), this will

slow down and stop your Walker.

2. The brakes on your Walker have a park option

(Figure 8). To operate the park option, push

downwards on both brakes simultaneously.

You will feel the brake make a very slight click.

Your brakes are now in the ‘lock’ position.

3. To unlock, simply pull up the brake again, you

will hear a slight click as the ‘park’ disengages.

BRAKE ADJUSTMENT

Your Walker brake system will require

periodic adjustment. To adjust the brakes,

loosen Nut B and then screw/unscrew Nut

A. When adjusted re-tighten Nut B. If further

adjustment is required then loosen the Locking

Screw and then using a pair of pliers pull the

cable down by approximately a millimeter.

Re-tighten Locking Screw. The brakes can

then be adjusted further by loosening Nut

B and screwing/unscrewing Nut A as before

(Figure 9)

Figure 7

Figure 8

Figure 9

Nut A

Nut B

Cable

Locking

Screw

REISSUE

If you reissue or are about to reissue this product, please thoroughly check

all components.

This includes:

• Bent or damaged tubes or cracks at the tube joints.

• Loose or worn horseshoe clips

• Elongated adjustment holes.

• Loose handles.

• Loose or worn Wheels and wheel fasteners (where fitted)

• Smooth, worn or split ferrules (rubber tips).

Replace all worn, missing or damaged parts where necessary. If in doubt,

please do not use and immediately contact your supplier for service

support.

CARE AND MAINTENANCE & YOUR OBLIGATION

1. For intended use only as a walking aid. Your Walker should only be used

on standard pavements or at home. It should not be used on rough

terrain or pot-holed surfaces. The use of your Walker on these surfaces

can seriously compromise your safety and may damage your Walker

beyond repair.

2. Keep your Walker clean by wiping down with a damp cloth and mild

detergent. Do not under any circumstances use an abrasive or solvent

based cleaner as this will seriously damage the Walker and void your

warranty.

3. Wipe off all surfaces with a dry cloth and use a water dispersing agent

such as WD40 on all metal joints.

4. Check that all wheels and the folding mechanism function correctly and

that all wheels move freely. Pay particular attention to the front wheels,

ensuring that they rotate freely and without obstruction and that they

are attached securely to the frame.

Withdraw your Walker immediately if any of the wheels become

difficult to turn or do not feel securely attached to the frame or if

you suspect damage or any other fault.

5. Monthly Checks - check that all locking pins are properly secure . Check

that no components are loose. Check the adjustment to your brakes.

Check castors.

6. Do not use any parts or accessories to your Walker manufactured by

another company. To do so will annul your warranty and may seriously

compromise your safety.

7. We suggest that you check your Walker visually every day. We

recommend that you should have your Walker serviced every three

months or less if used by, or issued to, various users.

CLEANING

Clean your Walker using a non-abrasive cleaner or mild detergent and a

soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may

seriously damage the product beyond repair and should not be used. Always

ensure that you wipe the equipment dry after cleaning.

MAINTENANCE

Please conduct a safety check of the product at regular intervals or if you

have any Concerns.

PRODUCT SPECIFICATIONS

LIMITED LIFETIME WARRANTY

Your Medic Therapeutics Multifunctional Adjusting Walker is backed by a

limited lifetime manufacturer’s warranty. Medic Therapeutics will repair or

replace your device at any time should it fail due to a defect in material or

workmanship, subject to the certain limitations.

This limited warranty does not cover any damage that results from

unauthorized or improper use, service, or repair. Further, it does not cover

damage caused by accident, impact, negligence, or normal wear and tear.

Should you discover your Medic Therapeutics Multifunctional Adjusting

Walker is not functioning properly, please send your device to our repair

center for evaluation. If your product cannot be repaired or serviced we will

reserve the right to change it for a similar or newer model.

Please note that a flat rate of $35.00 will be charged to cover a service

evaluation fee and return shipping of your device. All warranty claims must

be accompanied by a copy of your proof of purchase from an authorized

retailer. Please send your device, proof of purchase, and a check or money

order in the amount of $35.00 made out to Medic Therapeutics to:

Medic Therapeutics Service Center

3069 Taft Street

Hollywood, FL 33009

Material Aluminium

Material of wheels PP+PVC

Finish Metallic painng

Size(mm) L770*W665*H815-940

Seat Height (mm) 550

Seat width (mm) 475

Front wheel size (mm) 8”

Rear wheel size (mm) 8”

Load (kgs) 136kgs

N.W. (kgs) 8.5kgs

G.W. (kgs): 9.4kgs

Indice

Altri manuali Medic Therapeutics Ausilio alla mobilità

Medic Therapeutics

Medic Therapeutics 005-484 Manuale utente

Manuali Ausilio alla mobilità popolari di altre marche

Alber

Alber Scalamobil iQ Manuale utente

Ferno

Ferno CCT-PX Manuale utente

HEPRO

HEPRO Gripo Manuale utente

Otto Bock

Otto Bock Pheon 3R62 Manuale utente

NRS Healthcare

NRS Healthcare M11090 Manuale utente

Medline

Medline MDS86835DSHEC Guida all'installazione

Guldmann

Guldmann Twin Turner II Manuale utente

Drive

Drive ROOMBA Manuale utente

Gate

Gate Balder Manuale utente

Decon wheel

Decon wheel TNS Notos Manuale utente

ExoAtlet

ExoAtlet ExoAtlet-II Manuale utente

Invacare

Invacare Storm Series Manuale di istruzioni

Rhythm Healthcare

Rhythm Healthcare B3800F Manuale utente

AMF-BRUNS

AMF-BRUNS PROTEKTOR Manuale utente

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Manuale utente

Rhythm Healthcare

Rhythm Healthcare C500U Manuale utente

Lumex

Lumex RJ4200A Manuale utente

Rebotec

Rebotec Jumbo Manuale utente