MTS101-IFU01-EN-220630-MC
<7>
MediCapture® MTS101 Instructions for Use – English
Residual Risks
Important Safety Instructions to avoid residual risks.
1. Read all of these instructions and Instructions for Use of the host device.
2. Keep these instructions.
3. Heed all warnings in these instructions.
4. Follow all of these instructions.
5. Do not misuse this apparatus.
6. Make sure that your video source is directly connected to the main monitor via primary safety wiring.
7. Clean the device regularly with a soft cloth moistened with ethanol 75%. Follow the disinfectant
manufacturer’s instructions!
IMPORTANT!
Make sure that no humidity enters the device. Do not use any cleaning agents, scouring agents or
solvents on this device.
8. Do not install near any heat source such as radiators, heat registers, stoves or other apparatus that
produces heat.
9. Only use attachments/accessories specied by the manufacturer.
10. This device is only use in mounting status as a FIX type equipment. According to US deviation in
60601-1, FIX type equipment shall be Class I type to comply with NEC requirement.
All FIXED ME EQUIPMENT and PERMANENTLY INSTALLED ME EQUIPMENT shall be CLASS I
ME EQUIPMENT.
11. When using the VESA 75 mounting option, make sure that the screws are the correct length. Screws
that are too long may damage the product, and screws that are too short may compromise stability.
See chapter Back Panel – VESA 75 Mount.
12. Ensure that the mount is installed by qualied personnel and follow the instructions for the VESA
mount (not supplied by MediCapture).
The ACCOMPANYING DOCUMENTS shall contain instructions on attachment of structures to a
oor, wall, ceiling, etc. making adequate allowances for quality of the materials used to make the
connection and shall list the required materials. Additionally, there shall be advice on checking the
adequacy of the surface of the structure to which the parts will be attached.
13. Unplug this apparatus during lightning storms or when unused for long periods of time
Disconnection Method: Disconnect the USB cable.
14. Do not place vessels containing water or other liquids (such as vases, etc.) on top of the apparatus.
Do not splash water on top of the apparatus.
15. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as when a plug has been damaged, liquid has been spilled on the
apparatus, objects have fallen into the apparatus, and the apparatus has been exposed to rain or
moisture, or does not operate normally, or has been dropped.
16. Service Equipment by qualied personnel only, where qualied personnel refers to the person with
proper education or training assigned by the hospital, medical institution or authorized distributor.
17. This device does not have any serviceable parts. Repairs are carried out exclusively in MediCapture
service centers.
18. This device shall be used with a Class 1 type host device.
19. This equipment complies with the IEC 60601 safety standard only when connected to equipment
that complies with the IEC 60601-1 standard or applicable ISO or IEC standards. Anyone who
connects equipment to the signal input is conguring a medical system and is therefore responsible
that the system complies with the requirements of medical system standard IEC 60601-1.
Equipment not complying with UL/EN/IEC 60601-1 shall be kept outside the patient environment, as
dened on the systems standard.
