Meilhaus Electronic ME-Synapse-Express Manuale utente

Meilhaus Electronic GmbH

Fischerstrasse 2

82178 Puchheim/Germany

☎++49 - 89 - 89 01 66-0

FAX ++49 - 89 - 89 01 66-77

E-Mail suppor[email protected]

www.meilhaus.com

to change without notice. Meilhaus Electronic

assumes no responsibility for any problems

or damage which may result from errors or

omissions.

ME-Synapse-Express (ME-1-Express) - Rev. 1.0E

“Docking station”, converts 3 U CompactPCI to PCI-Express x1 over Cable

Model overview and scope of delivery (base model)

Model overview:

• ME-Synapse-Express (ME-1-Express): 2 user slots.

• ME-Synapse-Express-XL (ME-1-Express-XL): 6 user slots.

By default, the ME-Synapse-Express is sold in combination with ME DAQ and control boards. The ME-Synapse-

Express works transparently also with 3 U CompactPCI boards from other suppliers. However, our support

team cannot offer support for boards from other suppliers, only if the ME-Synapse-Express itself is considered.

Scope of delivery:

ME-Synapse-Express metal housing and PCIe module. This installation instruction on CD. The driver software

required for programming the ME boards is included in the delivery scope of the ME board(s).

Optional accessories:

• HE-ExpressCard

• HE-PCIe-x1

Adaptor/interface for Laptop/ExpressCard or desktop-PC/PCI-Express x1.

• ME AK-PCIe-x1

2 m PCI-Express cable x1

• ME-Synapse-LAN-RM-Kit

• ME-Synapse-LAN-XL-RM-Kit

Use to mount the ME-Synapse-LAN in 19“ systems. Includes 2 angular guidance plates and a front panel

• UTA-130

Universal DIN rail adaptor, use to mount ME-Synapse-LAN on standard DIN-rails. 2x required!

• ME-Synapse-LAN-PWR

• ME-Synapse-LAN-PWR-DT

Power supply for ME-Synapse-Express (or LAN), via Phoenix connector. DIN-rail-mountable or desktop device.

Short description

The concept: Use DAQ and control boards (eg. ME series) ”remotely“ via PCI-Express x1 over cable!

• “Docking station”/converter from 3 U CompactPCI to PCI-Express x1 over cable.

• Remote and decentral: Control all supported ME series boards (3 U CompactPCI models supported by the

software driver system ME-iDS) via PCIe over cable. Also with boards from other suppliers.

• Rugged industrial housing. Can be mounted in 19“ racks or on standard DIN-rail with optional accessory.

• 2 or 6 (XL) active slots for ME boards and others.

• Uses rugged, standardized, CompactPCI-based technology.

• ME DAQ hardware programmed via intelligent software driver system ME-iDS.

• Ideal solution also for “cross-platform” projects ethernet/LAN - PCI - CompactPCI and Windows - Linux.

• Use as remote DAQ system, data logger/line writer, for sensor data acquisition and control of actuators, in

classic DAQ, process control, automation, aerospace, automotive, environmental technology, building services

engineering and many more.

ME-SynapseExpress.indd 7 03.05.12 15:50

➄ Fuse 10 A

➆ Status LED 5 V

➅ Status LED 3.3 V

Back side:

➇ Phoenix terminals

for power supply

GND nom. 24 V

Connectors and LEDs of the ME-Synapse-Express (ME-1-Express)

➃ 2x slots for

the supported

ME series 3 U

CompactPCI

boards and

others

➀ PCI-Express x1 port

(type Molex 74960)

➁ Status LEDs:

POW

RES

RESP

Robust metal housing

Front side:

Operation in upright po-

sition (also 19“ mounted)

or flat on the side (also

when stacked with other

modules)

➃ ME-Synapse-Express-XL with 6

active 3 U CompactPCI user slots

ME-SynapseExpress.indd 8 03.05.12 15:50

How to mount the DAQ board

In most cases the DAQ board is already installed in the ME-Synapse (when bought as a package). If you want to

mount an existing, supported ME CompactPCI board into the ME-Synapse, please note the following: Insert the

board so it can easily slide in the two rails and is held securely. Plug the board into the internal backplane slot

without using any force. The position of the CompactPCI IEL handle is at the bottom (ME-Synapse in upright posi-

tion) or on the right (flat on the side, see picture), so that it can snap into the grid when locked. Lock the board,

again without using any force, and tighten all the screws at the front panel and at the handle.

Note that the ME CompactPCI boards

are not hotpluggable: The ME-Synapse

has to be switched off (ie. unplug po-

wer supply and LAN) to pull/insert the

boards.

Connectors, Status LEDs

➇Power supply

Connect the supply power as shown in the picture above (➇). If you don‘t use the power supply which is available

as an accessory part from Meilhaus Electronic, please note the supply power input data as listed in the specifi-

cations. Note that the housing has to be connected to PE (Power Earth).

➀PCI-Express x1 over cable interface

Connects the ME-Synapse-Express to your PC/Laptop. Use a 2 m PCI-Express x1 cable ME AK-PCIe-x1 (or com-

patible type) and an adaptor/host interface HE-ExpressCard (Laptop/ExpressCard) or HE-PCIe-x1 (desktop-PC/

PCI-Express x1).

➁Status-LEDs

POW - green - Power OK (permanent)

RES - red - Downstream Reset (flashing when Reset)

RESP - red - PCI-Bus Reset (flashing when Reset)

➃DAQ boards

Please find detailed information on the DAQ boards connectivity in the PDF user manuals supplied with the

boards, see ME-Power-CD.

Connecting a Power-on

Connect the ME-Synapse Express and the host system (laptop or PC with the laptop or desktop adaptor in-

serted) only in power-off condition. Use a cable ME AK-PCIe-x1-2 (or compatible). Switch on the ME-Synapse first

(by connecting the power supply), then start the host system.

Software installation and initialisation (ME series boards)

Follow the ME-iDS software installtion guide of your ME board. Also note the relevant readme files.

Pair of rails Grid for CompactPCI

IEL handle

ME-SynapseExpress.indd 9 03.05.12 15:50

Specifications

Docking station

Function “Docking station”/bridge/converter for Meilhaus Electronic 3 U Com-

pactPCI boards (ME series) to PCI-Express x1 over cable

Number of slots 2 or 6 (XL) active peripheral bus slots

+ 1 system slot for the ethernet module

Supported boards All boards supported by the driver system ME-iDS, 3 U CompactPCI

versions of the ME series: ME-8200, ME-8100, ME-6x00, ME-5000

cobalt, ME-FoXX ME-46x0, ME-1600, ME-1400 (except C/D), ME-1000,

ME-630, ME-96, ME-95, ME-94

General data

Interface PCI-Express x1, connector type Molex 74960;

internal 3 U CompactPCI

Housing Rugged metal housing, stackable, optional: 19“ and DIN-rail mountable

Size (mm, WxHxD) ~85 x 147 x 262 or XL: 185 x 147 x 262 (housing only)

Connectors PCI-Express x1 type Molex 74960. Phoenix terminal for external power

supply (optional)

The connector(s) for the DAQ, control or communication lines depend

on the ME board used

Power supply Phoenix connector. External power supply, optional.

9…35 V, nominal 24 V. Zero-signal current without load at 24 V

~200 mA. 24 V: Max. 6.5 A. 12 V: Max. 12.7 A. 30 V: Max. 5.5 A

Fuse 2x 10 A, type car mini fuse

Environmental Don‘t operate in direct solar radiation.

Operating temperature 0…55°C. 20…55% rel. humidity, non condensing

CE certification EG directive: 89/336/EMC; Emission: EN 55022; Noise immunity: EN

50082-2

Expandability

Connectivity Use the same connectivity accessory as available for the CompactPCI/

PXI board versions (eg. cable ME AK, terminal blocks ME AB)

Expansions Use the same expansion accessory as available for the CompactPCI/

PXI board versions (eg. analog multiplexer ME-MUX32, external relay

modules or opto modules ME-631 to ME-635)

ME-SynapseExpress.indd 10 03.05.12 15:50

Mounting the ME-Synapse into 19“ racks

To mount the ME-Synapse into a 19“ systeme a mounting kit (available as optional accessory) is required. The kit

includes 2 angular guidance plates and a front panel. To mount the guidance plates, screw out the 4 screws on

the ME-Synapse top side. Use the 4 screws to fix the guidance plates to the ME-Synapse top side, as shown in

the picture below.

To mount the front panel, screw out the 4 screws on the ME-Synapsen front side (the side with the slots for

DAQ boards). Use the 4 screws to fix the front panel to the front side of the ME-Synapse. Now the ME-Synapse

is ready for 19“ systems, using standard rails as shown in the picture below.

Picture shows ME-Synapse-USB -

ME-Synapse-LAN analog

ME-SynapseExpress.indd 11 03.05.12 15:50

Mounting the ME-Synapse on DIN-rail

2 universal DIN-rail adaptors UTA-130 are required to mount the ME-Synapse on standard DIN-rails. UTA-130

adaptors are available as an option. Screw both adaptors to the bottom of the ME-Synapse (use the provided

holes). With the adaptors attached, the ME-Synapse can now be mounted to and from DIN-rails easily.

Picture shows ME-Neuron -

ME-Synapse-Express analog

ME-SynapseExpress.indd 12 03.05.12 15:50

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Meilhaus Electronic Adattatore

Meilhaus Electronic

Meilhaus Electronic ME-1-USB Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente