MEITRACK T355G/T355 User Guide
Copyright © 2017 Meitrack Group All rights reserved. - 4 -
1Copyright and Disclaimer
Copyright © 2017 MEITRACK. All rights reserved.
and are trademarks that belong to Meitrack Group.
The user manual may be changed without notice.
Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for
any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying
and recording.
Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but
not limited to economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or
illegality to use the product or documentation.
2Product Introduction
The T355G is a 3G (WCDMA) magnetic GPS tracker. It is mainly used to track goods, valuables, equipment, and
other assets.
Two internal magnets make the tracker attach to the vehicle body and free of installation. If the tracker drops, a
drop alert will be generated.
The unique rugged design of the shell ensures that the tracker is water resistant, dustproof, shockproof, and
durable.
2.1 Product Features
2.1.1 Asset Tracking Mode
To enable the asset tracking mode, you need to enable the deep sleep mode and disable the 3D-Shake Wake Up
mode. After starting the device, you are not required to activate the drop alert. When a heartbeat packet is
generated, the GPS module will enable to obtain the latest location information. If the GPS positioning is still invalid
(for example, in a basement) after five minutes, no positioning data will be generated.
The device will upload data every one hour by default. But you can use Meitrack Manager or A11 command to set
the heartbeat packet reporting interval.
Heartbeat Packet Reporting Interval
(GPS Valid)
Note:
1. Device's working hour depends on the surroundings, parameter settings and events. The preceding data is for
