10 11
EN EN
AROMA DIFFUSER INSTRUCTION MANUAL AROMA DIFFUSER INSTRUCTION MANUAL
To help ensure a long working life, please properly maintain the diffuser. It’s necessary to maintain the diffuser
as outlined below once it has been used 5-6 times or for 2-3 consecutive days.
STEP 1: Disconnect the AC adapter from the power
supply. Take off the cover while keeping the diffuser
completely level. DO NOT tip from side to side.
STEP 2: Disconnect the DC plug from the diffuser base.
STEP 3: If there’s water left in the tank, pour it from the
drain side. DO NOT pour from the air outlet side, as water
may flow into the base of the diffuser.
STEP 4: Use a gentle diluted mild kitchen detergent on a
damp cloth to remove any essential oil residue, ensuring
no detergent remains. IMPORTANT: DO NOT press heavily
or scratch the ultrasonic mechanism in the water tank
during cleaning.
STEP 5: Add water into the tank with the water cup,
activate the diffuser, and set the timer for 30 minutes.
After 30 minutes, pour out remaining water and gently
wipe clean the water tank.
ON
Air Outlet
Air Outlet
Ultrasonic Mechanism
MaintenanceHow to Operate
1Remove the water tank cover by
carefully twisting counterclockwise,
and then pulling upwards while
keeping the diffuser stable. DO NOT
tip the diffuser.
2Attach the DC plug of the adapter
to the diffuser, then insert the
power cord into the slot.
3Add clean, cold tap water to the water tank using a
measuring cup, without exceeding the maximum water
line. DO NOT spill any water outside the tank. DO NOT
use hot water, distilled water, or refill while the diffuser
is in operation.
4Plug adapter into power source.
5Add pure essential oil (DO NOT add more than 6 drops
of essential oil to the appliance).
6Replace the cover on the water tank and twist
clockwise. Align circle indicators on the base and cover.
To avoid spillage, DO NOT tip the diffuser.
7Press and hold the “Mist” button for about three seconds
to turn on diffuser. Set the desired time to 30, 60,
120 minutes, ON, or OFF by pushing the “Mist” button
repeatedly – green signal indicates which setting is on.
To turn off diffuser completely, press and hold the “Mist”
button for about three seconds.
8Press the “Light” button to turn on the LED light. Six
light colour options at varying brightnesses are available.
Press the “Light” button repeatedly to select your
desired colour/ brightness. To turn off light completely,
press and hold the button for about three seconds.
Light
Button
9In between uses, drain any remaining water from water
tank and clean properly [maintenance instructions on
next page]. Store in a cool, dry place.
Clean the diffuser with a neutral detergent before reusing.
If the water level inside the diffuser runs too low, it will
automatically stop operating even if you attempt to turn
it on.
The LED light will also turn off when the preset time has
elapsed.
ON
ON
Mist
Button
ON
Circle Indicator
ON
