Merging Hapi MKII Manuale utente

Hapi MKII

User Manual

Revision 0.01 19/03/2021

 
 
 www.merging.com/hapi Page 2 
 
HAPI MKII User Manual 
Contents 
Hapi Warranty Information......................................................................................................................9 
Contacting Merging Technologies.........................................................................................................9 
Introduction to HAPI MKII......................................................................................................................10 
HAPI MKII - Block Diagram....................................................................................................................12 
HAPI - Optional Cards............................................................................................................................15 
IOM-H-AKDG8D / AKDG8DP....................................................................................................................................15 
IOM-H-AKD8D / AKD8DP............................................................................................................................................18 
IOM-H-AD8D / AD8DP - Legacy Product............................................................................................................21 
IOM-H-DA8/DA8P (>= run 11)...................................................................................................................................24 
IOM-HORUS-DA8/DA8P (< run 11) - Legacy product..................................................................................26 
IOM-H-ADA8S/ADA8P..................................................................................................................................................30 
IOM-H-ADA8 - Legacy Product.................................................................................................................................34 
IOM-H-PT64........................................................................................................................................................................36 
IOM-HAPI-MADM/MADS.............................................................................................................................................40 
HAPI - Cables....................................................................................................................................................................41 
HAPI MKII Key Features ........................................................................................................................46 
HAPI MKII - Modules Capabilities..........................................................................................................................49 
HAPI MKII - Modules Latencies...............................................................................................................................49 
Installing an additional Hapi I/O Module..............................................................................................50 
Installing a Hapi MADI Module (MADM or MADS are optional)...............................................................51 
Assembling the Rack Mount ears ........................................................................................................53 
Installing the Merging NET-MSC-GBEX1.............................................................................................54 
HAPI MK II - Power ON...........................................................................................................................56 
HAPI MKII - OLED screen interface......................................................................................................58 
Hapi Menu Hierarchy......................................................................................................................................................58 
Screen Navigation............................................................................................................................................................59 
Home Screen.....................................................................................................................................................................59 
Volume Menu.....................................................................................................................................................................60 
Meters Menu.......................................................................................................................................................................60 
A/D Meters Sub-Menu (Meters)................................................................................................................................60 
D/A Meters Sub-Menu (Meters)................................................................................................................................61 
Input Levels Sub-Menu (Meters)..............................................................................................................................61 
Output Levels Sub-Menu (Meters)..........................................................................................................................61 
Meters Settings Menu....................................................................................................................................................62 
I/O Menu & Sync Sub-Menu (I/O)............................................................................................................................62 
Refs Sub-Menu (I/O)......................................................................................................................................................64 
Timecode Sub-Menu (I/O)...........................................................................................................................................64 
Status Sub-Menu (I/O)...................................................................................................................................................65 
PreAmp Menu....................................................................................................................................................................66 
Setup Menu.........................................................................................................................................................................68 
Formats Menu (Setup)...................................................................................................................................................68 
Routing Menu (Setup)....................................................................................................................................................70 
Routing: Source Configuration..................................................................................................................................70 
Modules Menu (Setup)..................................................................................................................................................72 
Headphone Menu.............................................................................................................................................................73 
TRIM: Headphones.........................................................................................................................................................73 
Modules: MADI Sub-Menu..........................................................................................................................................75 
Modules: A/D Sub-Menu..............................................................................................................................................75 
Modules: ADA Sub-Menu.............................................................................................................................................76 

 
 
 www.merging.com/hapi Page 3 
 
HAPI MKII User Manual 
Modules: D/A Sub-Menu..............................................................................................................................................76 
TRIM: DA..............................................................................................................................................................................77 
Modules: Loopback (hidden menu, available only for debug use)..........................................................78 
System (Setup):................................................................................................................................................................79 
Network Menu (Setup)...................................................................................................................................................80 
Info (Setup):........................................................................................................................................................................81 
ERROR Menu....................................................................................................................................................................81 
EXIT Menu...........................................................................................................................................................................82 
HAPI MKII - Web Control Access..........................................................................................................83 
Installing and accessing the Hapi Control interface remotely....................................................................83 
HAPI MKII embedded User Manual........................................................................................................................92 
HAPI & HORUS Setup Examples..........................................................................................................93 
IOM-H-PT64 & Digidesign HDIO Setup................................................................................................................99 
Manage Mic PREs from Pro Tools....................................................................................................................... 100 
Pro Tools on PC Horus/Hapi................................................................................................................................... 101 
Use Horus-HAPI MIDI din......................................................................................................................................... 103 
HAPI MKII - Firmware Update Procedure...........................................................................................105 
HAPI - Troubleshooting.......................................................................................................................109 
Hapi on screen Error Report.................................................................................................................................... 109 
How to provide Merging Support with a Hapi MKII Debug Report file............................................... 111 
Firewall and Antivirus.................................................................................................................................................. 111 
FOR MORE INFORMATION .................................................................................................................112 

www.merging.com/hapi Page 4

HAPI MKII User Manual

IMPORTANT SAFETY AND

INSTALLATION INSTRUCTION

SAVE THESE INSTRUCTIONS

INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC

SHOCK, OR INJURY TO PERSONS

WARNING –when using electric products, basic precautions should be followed, including the

following:

1. Read all of the safety and installations instructions and explanation of graphic symbols

before using the product.

2. The product must be grounded otherwise it could malfunction or breakdown. Grounding

provides a path of least resistance or electric current to reduce the risk of electric shock. This

product is equipped with a power supply cord having an equipment-grounding conductor and

a grounding plug. The plug must be plugged into an appropriate outlet which is properly

installed and grounded in accordance with all local codes and ordinances.

DANGER –Improper connection of the equipment-grounding can result in a risk of electric

shock. Do not modify the plug provided with the product –if it will not fit the outlet have a

proper outlet installed by a qualified electrician. Do not use an adapter that defeats the

function of the equipment-grounding conductor. If you are in doubt as to whether the product

is properly grounded, check with a qualified serviceman or electrician.

3. Do not use this product near water –for example, near a bathtub, washbowl, kitchen sink,

in a wet basement, or near a swimming pool, or the like.

4. This product should only be used with a stand or cart that is recommended by the

manufacture.

5. This product, either alone or in combination with an amplifier and speakers or headphones,

may be capable of producing sound levels that could cause permanent hearing loss. Do not

operate at a high volume level or at a level that is uncomfortable. If you experience any

hearing loss or ringing in the ears, you should consult an audiologist.

6. The product should be located so that its location or position does not interfere with its

proper ventilation.

7. The product should be located away from heat sources such as radiators, heat registers, or

other products that produce heat.

8. The product should be connected to a power supply only of the type described in the

operating instructions or as marked on the product.

9. The power-supply cord of the product should be unplugged from the outlet when left

unused for a long period of time. When unplugging the power supply, do not pull on the cord,

but grasp it by the plug.

10. Care should be taken so that objects do not fall and liquids are not spilled into the

enclosure through openings.

www.merging.com/hapi Page 5

HAPI MKII User Manual

11. The product should be serviced by qualified service personnel when: A. The power supply

cord or plug has been damaged. Objects have fallen, or liquid has spilled into the product, or

C. The product has been exposed to rain, or D. The product does not appear to be operating

normally or exhibits a marked change in performance, or E. The product has been dropped, or

the enclosure damaged.

12. Do not attempt to service the product beyond that described in the user maintenance

instructions. All other servicing should be referred to qualified service personnel.

13. WARNING - Do not place objects on the power supply cord, or place the product in a

position where anyone could trip over, walk on, or roll anything over cords of any type. Do not

allow the product to rest on or be installed over cords of any type. Improper installations of this

type create the possibility of a fire hazard and/or personal injury.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of sufficient magnitude to constitute a risk

of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing) instructions

in the literature accompanying the product.

No part of this documentation may be reproduced in any form whatsoever or be stored in any

data retrieval system without prior written permission of the copyright owners.

This documentation is supplied on an as-is basis. Information contained within this

documentation is subject to change at any time without notice and must not be relied upon.

All company and product names are ™ or Registered Trademarks ® of their respective

owners. Windows 7 and Windows 10 are a trademark of Microsoft Corporation.

Merging Technologies makes no warranties express or implied regarding the Hapi embedded

software, its quality, performance, merchantability or fitness for a particular purpose. The

software is supplied “as is” you, the purchaser, are assuming the entire risk of the results of

using this Merging Technologies software.

In no circumstances will Merging Technologies, its owners, directors, officers, employees or

agents be liable to you for any consequential, incidental or indirect loss or damages including

loss of time, loss of business, loss of profits, loss of data or similar resulting from the use of or

inability to use the Merging Technologies hardware and or software or for any defect in the

hardware software or documentation.

www.merging.com/hapi Page 6

HAPI MKII User Manual

IMPORTANT NOTICE:

Please read the following information very carefully before attempting any installation. Failure to comply

with the precise instructions may result in damage to your Merging hardware. Please read this entire

section of the manual carefully before installation.

STATIC DANGER NOTICE:

Please note that the Hapi contains delicate electronic components that can be damaged or even

destroyed when exposed to static electricity. Take all necessary precautions not to discharge static

electricity when touching any of the Hapi connectors.

Product Regulatory Compliance

The Merging Hapi Network Converter is designed and tested to meet the standards and regulations

listed in the following sections.

Product Safety Compliance

Hapi complies with the following safety requirements:

•UL 1950 –CSA 950 (US/Canada).

•EN 60 950 (European Union).

•IEC 60 950 (International).

•CE –Low Voltage Directive (73/23/EEC) (European Limits).

•EMKO-TSE (74-SEC) 207/94 (Nordics).

Product EMC Compliance

The system has been tested and verified to comply with the following EMC regulations:

•FCC (Class A Verification) –Radiated and Conducted Emissions (USA).

•CISPR 22, 3rd Edition (Class A) –Radiated and Conducted Emissions (International).

•EN45022 (Class A) –Radiated and Conducted Emissions (European Union).

•EN45024 (Immunity) (European Union).

•EN6100-3-2 & -3 (Power Harmonics and Fluctuation and Flicker).

•CE –EMC Directive (89/33/EEC) (European Union).

Electromagnetic Compatibility Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2), this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment to an outlet on a circuit other than the one to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the grantee of this device could void the user’s

authority to operate the equipment. The customer is responsible for ensuring compliance of the

modified product.

Only peripherals (computer input/output devices, Ethernet switches, terminals, printers, etc.) that

comply with FCC Class B limits may be attached to this computer product. Operation with noncompliant

peripherals is likely to result in interference to radio and TV reception.

All cables used to connect to peripherals must be shielded and grounded. Operation with cables,

connected to peripherals that are not shielded and grounded, may result in interference to radio and TV

reception.

www.merging.com/hapi Page 7

HAPI MKII User Manual

Environmental Limits

System Office Environment Parameter Limits

Operating Temperature +5 degrees C to +45 degrees C with the maximum rate of change not to

exceed 10 degrees C per hour.

Non-Operating Temperature -40 degrees C to +70 degrees C

Non-Operating Humidity 95%, non-condensing @ 30 degrees C

Operating Shock No errors with a half sine wave shock of 2G (with 11-millisecond duration).

Package Shock Operational after a free fall, 60 cm depending on the weight.

ESD 15kV per Merging Environmental Test Specification

www.merging.com/hapi Page 8

HAPI MKII User Manual

Declaration of Conformity

According to

EMC Directive 2004/108/EC

Product Hapi MkII

Manufacturer Merging Technologies SA

Le Verney 4

CH-1070 Puidoux

Switzerland

Electrical Rating 90-260 VAC, 50/60 Hz, 0.15 A (at 230V)

Standards EN 55103-1:2009, EN 55103-2:2009, EN 61000-3-2 :2006+A1+A2, EN

61000-3-3 :2008

Detailed specifications of the tested and certified product are shown in the following Test

Report:

Test report Ref No: 16'835 Issued Date: June 2012 by Montena EMC SA

The CE label is affixed on the rear of right side of the Hapi MkII unit as per below :

Date 12 June 2012

Claude Cellier

President

Merging Technologies S.A.

www.merging.com/hapi Page 9

HAPI MKII User Manual

Hapi Warranty Information

This product is warranted to be free of defects in materials and workmanship for a period of two years

from the date of purchase. Merging Technologies, Inc. extends this Limited Warranty to the original

purchaser.

In the event of a defect or failure to confirm to this Limited warranty, Merging Technologies, Inc. will

repair or replace the product without charge within sixty (60) days. In order to make a claim under this

limited warranty, the purchaser must notify Merging Technologies, Inc. or their representative in writing,

of the product failure. In this limited warranty the customer must upon Merging Technologies, Inc.

request, return the product to the place of purchase, or other local designation, for the necessary

repairs to be performed. If the consumer is not satisfied with the repair, Merging Technologies, Inc. will

have the option to either attempt a further repair, or refund the purchase price.

This warranty does not cover: (1) Products which have been subject to misuse, abuse, accident,

physical damage, neglect, exposure to fire, water or excessive changes in the climate or temperature,

or operation outside maximum rating. (2) Products on which warranty stickers or product serial numbers

have been removed, altered or rendered illegible. (3) The cost of installations, removal or reinstallation.

(4) Damages caused to any other products. (5) Do not attempt to service the equipment. There are no

user serviceable parts inside*. Please refer all servicing to an authorized Merging sales partner. Any

attempt to service the equipment will expose you to a risk of electric shock, and will void the

manufacturer’s warranty.

* Replacing or adding a AD, DA or MADI module and adjusting the DA module dip switch (output) is permitted

under the supervision of a Merging sales partner. Any other modification will void the Hapi warranty.

Contacting Merging Technologies

International Office:

Merging Technologies S.A.

Le Verney 4

CH-1070 Puidoux

Switzerland

Phone: +41 21 946 0444

Fax: +41 21 946 0445

USA:

Merging USA (Independent Audio)

43 Deerfield Road

Portland,

ME 04101-1805

United States of America

Phone: +1 (207) 773 2424

Fax: +1 (207) 773 2422

For all documentation inquiries or suggestions for improvement:

www.merging.com

Merging technologies SA.

Product features and specifications are subject to change without notice.

Merging Technologies SA shall not be liable for technical or editorial errors contained herein, nor for

incidental or consequential damages resulting from the furnishing, performance or use of this manual.

www.merging.com/hapi Page 10

HAPI MKII User Manual

Introduction to HAPI MKII

Modular by Design

Hapi, the son of Horus. Born from the most flexible and sonically transparent audio interface and

providing the same RAVENNA / AES67 connectivity as its father, Hapi is both the perfect primary

interface for smaller systems as well as the ultimate accessory for a system using Horus where control

room I/O is required. Hapi was designed to give its users an Audio I/O channels flexibility while offering

an unprecedented level of quality in such a small form factor.

Providing as standard; 8 channels of AES- EBU I/O plus 8 ADAT or 2 SPDIF I/O (on TOSLINK) and 2

Network interfaces 2slots for AD8D/AD8P, DA8/DA8P, MADI or PT64 option cards. Once the Hapi is

fully loaded with option cards, it is capable of achieving 88 inputs and 90 outputs @ 1FS There are

indeed 2 more output channels than input channels, including the Stereo Headphone Monitoring.

Route Signal Anywhere

Hapi has been designed so that any input can be routed to any number of outputs as required

simultaneously. With comprehensive routing pages accessible both locally on the touchscreen and by

remote access using a standard web browser, Hapi is the answer to signal flow management in your

studio.

Green Built

For environmentally-conscious users, Hapi has been designed meticulously in order to keep power

consumption at an incredible minimum. A fully loaded Hapi running all channels of phantom power will

only draw about 30W, making it more affordable to run than your kitchen lights.

HAPI MKII Key Features

• Up to 88 inputs and 90 outputs @1FS

• 8x AES/EBU + 8x ADAT or 2x SPDIF (Optical)

• Standard modules support 44.1kHz to 192kHz and Premium up to DXD/DSD256.

• Signal routing from any input to any combination of outputs

• RAVENNA/AES67 Compatible (Hapi MKII supports Network redundancy and Network Switch mode)

• Browser-based remote access using any web enabled device

• AC or DC power supply options

• Modular design for additional analog and Digital I/O

• Near-zero latency from in to out (<1ms)

• Main rotary control button

• ST2022-7 Support (Seamless Protection Switching)

• Network Switch mode support (allowing daisy chain for an extra network device)

• Additional Roll Off filters

• Per channel DA Trims level and polarity support

• Per channel Headphones Trims level and polarity support

• Routing support with per channel support

• Mastering grade Headphone Amp

• Powerful Headphone Amp suitable for ultra-low to very high impedance headphones.

• Headphones DSD volume support (DSD64, DSD128, DSD256)

• Headphones DSD256 support

• OLED display for local control access

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Merging Convertitore multimediale

Merging

Merging Sphynx 2 Manuale utente

Merging

Merging Anubis Documento tecnico

Merging

Merging Horus Manuale utente

Merging

Merging MERGING+NADAC Manuale utente

Merging

Merging SPHYNX II Manuale utente

Merging

Merging HORUS-AD8 Manuale utente

Merging

Merging Horus Manuale utente

Merging

Merging Hapi Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente