1. Carefully remove contents of box out ofthe packaging.
. 1x VoltArt4oo
. 1 x 110V Charger + basic tools
. 1x Cha.ging dock for chargingthe battery outside ofthe eBike
. 2 x Remote Starters to activate eBike
. 2 x Keys to open battery compartment
Place handle bar in place and tighten allen screws
lnflate tires to about 30-35PSl3.
4. Place your VoltArt4oo on a clean flat surface while securing one ofthe wheels so it stays in
place then proceed to visually checkthe VoltArt4oo components and ensure that all screws
and bolts are tightened and thattires are correctly inflated. Check and adiust break leverto
your preference and check that the single speed derailleur functions properly. This is usually
already done once at the factory and once before shipping but as a precautionary measure
we recommend you do this as well before riding.
5. Open the battery case and insert the battery into its socket. Charge your voltArt4oo in a
clean environment at ambient temperature until light on the charger turns from red to
green. Note: You may also charge the battery outside the bike by using the supplied
charging dock. Hook up the charger to the dock on one side and to the wall outlet on the
other. Then place the battery on the dock into the socket,
6. To activate the eBike you must use the remote and press the POWER button TwlCE.
7. To turn offthe egike you must use the remote and press the L,NLOCK button ONCE. You can
also turn off the eBike by pressing the CIRCLE on the ri8ht hand side of the handle bar
TWICE. lPressing the power button on remote will not turn off the eBike.)
L To activate the optional a,arm on the eBike (while it is Off) you hust use the remote and
press the LOCK button ONCE. ln this armed state the siren willEo offand the back wheel
will lock if the eBike is moved. To stop the siren press the UNLOC( button ONCE.
9. To deactivate optional armed mode on the eBike you must use the remote and press the
UNTOCK button ONCE. Or press the POWER button TWICE to deactivate the armed mode
and simultaneously turn on the eBike.
10. To open the battery case you can use the black key provided or LONG PRESS the MOTOR
button on the right hand side ofthe remote. Place your hands on both sides of the battery
case as both doors will spring open.
11. once you've familiarized yourself with the digital display you will be ready to ride. Please
ride carefullyl (see attached instruction forthe display)
