Merloni
Elettrodomestici
WASHING MACHINE 2000
Service Manual
GB 2001-04-23/01 6-56
Language Issue/Edition Page
Led
There are three ON-StandBy led management modes:
A. StandBy mode: the user is informed when the machine is not carrying out
a programme; this flashing mode is active after stopping and resetting. The
led flashes at a frequency of about 1 Hz
B. Programme Acceptance Mode: the led flashes for about 3" at a frequency
of 10 Hz
C. ON mode: the led is always alight
Programme Setting
Normal programme setting:
• The machine starts from a StandBy position (led in mode A)
• The user selects a programme
• If the selector remains in the same position for at least 5" the machine
passes to the programme acceptance mode (led in mode B) and then to
ON (led in mode C)
• At this point the programme starts
• It does not change if the selector position is modified
• The user can stop the cycle by moving to the Reset position (marked with
a dot)
1.2 Timer Delay Setting
• The machine starts from a StandBy position (led in mode A)
• The user turns the selector to the desired delay
• If the selector remains in the same position for at least 5" the machine
passes to the delay acceptance mode (led in mode B) and then to ON (led
in mode C)
• The user selects a programme
• If the selector remains in the same position for at least 5" the machine
passes to the programme acceptance mode (led in mode B) and then to
ON (led in mode C)
• It is not changed if the selector position is modified
• The user can stop the delay count by moving to one of the Reset positions
for at least 5" (marked with a dot on the programme disc)
• When the count down is completed the machine starts its cycle and passes
to ON (led in mode C)
• It is not changed if the selector position is modified
• The user can stop the cycle by moving to one of the 5 Reset positions for
at least 5"
