THIEN MINH MECHANICAL - ELECTRIC JSC
Head office: MESTAR Building, No. 98/11 Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh City, Vietnam
We reserve the right to make technical and design changes.
LED STRIP LIGHT
INSTALLATION MANUAL
IP68
A. INSTALLATION
Users must follow the safety instructions, specifications and warning notes written in this manual. If don't follow it, we will not be responsible for the warranty.
1. Turn off the power.
POWER
On
Off
2. Cut the length to be installed at the
cutting position.
3. Fix aluminum profile with install
surface by mounting clip.
4. Remove 3M tape from strip light and
paste the strip to the profile aluminum.
5. Fix the strip by clip then fix cover and
end cap with aluminum profile. 7. Turn on the power.
6. Connect LED strip light with power. 8. Completed install.
POWER
On
Off
3M tape
24V+
24V-
24V+
24V-
24V+
24V-
24V+
24V-
DC24V-
DC24V+
Electrical
cabinet
24V+
24V-
24V+
24V-
24V+
24V-
24V+
24V-
DC24V-
DC24V+
Electrical
cabinet
24V+
24V-
24V+
24V-
24V+
24V-
24V+
24V-
24V+
24V-
24V+
24V-
24V+
24V-
24V+
24V-
End cap
Cover
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
minimum cutting unit
*WARNING
1. Carefully unpack the carton. Check the contents to
ensure that all parts are present and have been
received in good condition.
5. Don’t physical impact or use of chemicals that
deform the luminaires and affect the surface.
。
4. Don’t cut in the wrong position.
2. If don't use, should be put in the right place to
avoid fire and explosion or causing environmental
pollution.
3. Contact the manufacturer if need help. Don't
install it if don't know the pieces of information.
7. Install in accordance with national standards and
local electrical codes.
8. This products must be installed and maintained by
a qualified electrician.
9. Disconnect the power supply during installation.
POWER
On
Off
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
+DC24V-
13. All wires must be wrapped insulated and make sure
waterproof.
16. Check luminaire is fixed and secure after installation.
14. Do not let the poles of the wire touch each other.
24V+
24V-
24V+
24V-
24V+
24V-
24V+
24V-
6. Don’t fold, break, twist and bend LED strip light in
the horizontal plane.
11. Don’t connect supply power when roll intact.
12. The product must be installed in environment ≤IP68.
15. Not use glue wrap electrical to wrap the cable.
17. Must use connector or junction box IP68 to connect
cable.
18. Make sure LED driver IP68 or if LED driver <IP68
must put into placed in waterproof electrical cabinet.
+DC24V-
+DC24V-
19. Sealed at the cut end by end cap and pour waterproof
glue .
Dust tight. No ingress
of dust
Continuous immersion
in water
Xm
10. Use insulated gloves during product installation.
