Intelligent Products—5551RJ Intelligent Rate-of-Rise Thermal Detector w/ Fixed Temp. Heat Detector 3
Introduction
This document contains important information about installing and
operating the Johnson Controls 5551RJ intelligent, analog, rate-of-rise
thermal detector with a conventional fixed temperature heat detector. If
you install 5551RJ intelligent rate-of-rise thermal detectors for someone
else to use, you must leave a copy of this document with the user.
Before you install the 5551RJ detector, read and become familiar with:
●the control panel system installation manual
●the requirements of the authority having jurisdiction
●National Fire Protection Association (NFPA)-72-National Fire
Alarm Code
●System Sensor Guide for Proper Use of System Smoke Detectors
Technical Bulletin in the Fire Initiating Devices and Notification
Appliances Technical Manual (FAN 408), which provides detailed
information on detector spacing, placement, zoning, wiring, and
special applications
●or, for non-United States installations, applicable codes and standards
specific to country and locality of installation
Failure to follow these directions may result in failure of the device to
report an alarm or trouble condition. Johnson Controls is not responsible
for devices that have been improperly installed, tested, or maintained by
others.
As is the case with all installations under NFPA, Underwriters
Laboratories, Inc. (UL), Underwriters Laboratories of Canada (ULC), or
Canadian Electrical Code classification, final written approval of
permissible operation and configuration rests with the authority having
jurisdiction.
