Metos MAXIGLASS NOVERTA Manuale utente

USER MANUAL

05.10.2012

GLASS DOOR BOTTLE COOLERS

METOS MAXIGLASS NOVERTA

4146700,4146702, 4146704, 4146706, 4146708, 4146710, 4146712, 4146714, 4146716, 4146718, 4146720, 4146722, 4146724,

4146726, 4146728, 4146730, 4146732, 4146734

Table of Contents

1. Safety precautions ....................................................................................................................................3

1.1. Refrigerant...................................................................................................................................................3

1.2. During operation..........................................................................................................................................3

1.3. After use......................................................................................................................................................3

2. Product description ..................................................................................................................................4

2.1. Type plate ....................................................................................................................................................4

3. Installation .................................................................................................................................................5

3.1. How does it work ........................................................................................................................................5

3.2. Installing the appliance ................................................................................................................................5

3.3. Fitting storage racks ....................................................................................................................................5

3.4. Power supply...............................................................................................................................................6

4. Using the appliance ..................................................................................................................................7

4.1. Prior to use..................................................................................................................................................7

4.2. Thermostat..................................................................................................................................................7

4.2.1. Temperature setting ....................................................................................................................................8

4.2.2. Manual defrost ............................................................................................................................................8

4.2.3. The hidden menu ........................................................................................................................................8

4.2.4. Locking and locking of the keyboard............................................................................................................8

4.2.5. Alarm signals...............................................................................................................................................9

4.3. Filling the cabinet ........................................................................................................................................9

5. Cleaning ...................................................................................................................................................10

6. Troubleshooting....................................................................................................................................... 11

7. Technical information..............................................................................................................................12

METOS Maxiglass Noverta 05.10.2012

1. Safety precautions

Prior to use check

• whether the power supply is suitable for this product

• that the plug and the lead are not damaged

• ensure that the product is standing ﬁrmly and level

Hold the plug when removing the plug from the socket.

Always have repairs carried out by qualiﬁed service engineers.

1.1. Refrigerant

This product contains a refrigerant. The quality and quantity used in this product are stated on the type

plate.

Large quantities of refrigerant can cause serious damages.

Always ensure that there is sufﬁcient ventilation in the room where the appliance is located.

Refrigerant can cause frost injury.

1.2. During operation

• Only use this product for storing packed beverages.

• Never use the product as a step.

• Never store electrical appliances in the product.

• Always store beverages with a high percentage of alcohol standing upright and tightly closed.

• Ensure that ventilation grilles both in and outside the cabinet remain unobstructed.

• In case of emergency the plug should be removed from the socket.

• Ensure that the ambient temperature does not exceed the climate classiﬁcation.

1.3. After use

The crossed-out wheeled bin means that within the European Union the product

must be taken to separate collection at the product end-of life.

This applies to your device but also to any enhancements marked with this sym-

bol. Do not dispose of these products as unsorted municipal waste.

05.10.2012 METOS Maxiglass Noverta

2. Product description

1 Type plate (inside) 3 Air in/outlet 5 Thermostat

2 Door 4 On/off switch

2.1. Type plate

Type

Refrigerant type + volume

Power consumption

Supply

Rated current

Climate classiﬁcation *

Construction year

Unit serial number

*A refrigerator is produced for optimal performance within certain ambient temperatures. This product is

suitable for the following classifcation: N: from +16 °C to +32 °C.

METOS Maxiglass Noverta 05.10.2012

3. Installation

Never install the refrigerator next to a heat source.

3.1. How does it work

A refrigerator works by extracting heat from the space to be refrigerated and to release this in the sur-

rounding area. For maximum air circulation it is recommended to allow at least 10 cm space around the

refrigerator.

Be very careful never to obstruct the air inlets and outlets.

3.2. Installing the appliance

Place the appliance on a smooth surface.

1. Place the product at his position.

2. Make sure the product is standing level using a spirit level.

3. Use the adjustable feet to level the product.

4. To meet the ECA criterian of the M2 temperature class, the thermostat must be set at a set point of

1°C and the bottom shelf must be placed on the bottom of the cabinet.

3.3. Fitting storage racks

1. Hook pin (1) in openings (2) of rails (C).

2. Push bottom part (B) towards side (A).

3. This causes pin (3) to slot into the next opening (4) in the rails.

4. Fit the other pins at the same height.

5. Place the storage rack (D) sliding the pins (5) in the openings (6).

05.10.2012 METOS Maxiglass Noverta

3.4. Power supply

• If this device cable is damaged it must be replaced with an original cable supplied by the producer.

• In case of emergency: remove the plug lead from the socket.

• The socket should be within easy reach of the cabinet.

• Check for the correct power supply, referred to the information on the type plate.

• Ensure that the plug lead cannot be trapped or snagged.

• If necessary the plug lead can be extended by a qualiﬁed electrician.

• We do not recommend the use of an extension lead.

Fluctuations in the power supply can cause damage, which causes the cabinet to switch off.

The manufacturer cannot be held responsible for any consequential damage.

EMERGENCY STOP

REMOVE THE PLUG FROM THE SOCKET

METOS Maxiglass Noverta 05.10.2012

4. Using the appliance

4.1. Prior to use

• Clean the cabinet prior to use. For further details we refer to the maintenance section.

• Leave the installation to stand for at least 2 hours before switching on the cabinet.

• Plug into a grounded power socket.

4.2. Thermostat

Key combination

To lock or unlock the keyboard

To enter in programming mode

Return to room temperature display

Icons and functions

On Compressor enabled

Flashing Compressor delay enabled

On Light output enabled

On Fans output enabled

Flashing Fans delay after defrosting

On Measurement unit

Flashing Programming mode

On Energy saving mode active

On An alarm condition is present

Flashing Start-up operations are pending

Start-up operations lasts about 30 sec. after powering on device. At the end of this phase, the alarm icon

will switch off if no alarm is active. Wait for the end of this interval of time before doing modiﬁcations on

the parameter map.

Light switch

Defrost switch

SET button

Down

Energy saving

Icons

05.10.2012 METOS Maxiglass Noverta

4.2.1. Temperature setting

• Push and immediately release the SET key, the set point will be shown.

• Push and relase of SET key or wait for 5 sec. to return to the normal view.

Change of setpoint

• Push the SET key for more than 2 sec and release, then push the SET key again.

• Setpoint value will be displayed and tthe ”°C” LED starts blinking.

• To change the value push UP or DOWN key.

• To memorise the new value, push SET key three times or wait for 10 sec.

4.2.2. Manual defrost

Push the DEFROST button for more than 2 sec. to start defrosting.

4.2.3. The hidden menu

The hidden menu includes all the parameters of the instrument.

To enter the hidden menu

• Press the SET+DOWN buttons simultaniously for 3 sec. (°C or °F starts blinking)

• Release the buttons. Press again SET+DOWN for more than 7 secs. The L2 label will be displayed

immediately followed from HY parameter.

You are now in the hidden menu

• Select the required parameter

• Press SET key to display its value.

• Use UP or DOWN button to change the value.

• Press SET to store the new value and move to the following parameter.

To exit, press SET+UP or wait for 15 sec. without pressing any key.

If there are no parameters in ”L1”, after 3 sec. the ”nP” label will be displayed. Keep the keys pushed till

the ”L2” message will be dispalyed.

The previous set value will be stored even if the programming mode is exited by waiting for the time-out

to expire.

Move parameters from the hidden menu to the ﬁrst level and viceversa.

Each parameter present in the hidden menu can be removed or put into the user level (Fist level) by

pressing SET+DOWN. If the parameter is visible also in user manu, the decimal poist will lit in the hidden

menu.

4.2.4. Locking and locking of the keyboard

• To lock the keyboard, keep UP+DOWN pressed more than 3 secs.

• The OFF label will be diaplayed and the keyboard will be locked. If any button is pressed more than 3

secs, the OFF message will be dispalyed.

• To unlock, keep UP and DOWN buttons pressed together for more than 3 secs till the ”ON” message

will be dispalyed

METOS Maxiglass Noverta 05.10.2012

4.2.5. Alarm signals

Mess. Cause Output

P1 Room probe failure Compressor output according to

Con e COF

P2 Evaporator probe failure Defrost end is timed

P4 Condenser probe failure Condenser temperature alarm is

not managed

HA Maximum temperature alarm Outputs unchanged

LA Minimum temperature alarm Outputs unchanged

dA Door open more than dA time Compressor and fans retar

Alarm recovery

Probe alarms P1, P2 and P4 - Call service

Temperature alarms HA and LA automatically stop as soon as the temperature returns to normal value.

4.3. Filling the cabinet

• This product is only to be used for the refrigeration of packed beverages.

• Fill the cabinet during a period when it is least used. Repeatedly opening of the door will slow down

the refrigeration of the products.

• Beverages with a high alcohol percentage should always be stored properly sealed in an upright

position.

To guarantee optimal performance and air circulation the air vents of the cabinets should NEVER be

obstructed.

NEVER use the cabinet to store electrical appliances.

Apply the so called ﬁrst-in ﬁrst-out principle when serving beverages out of the cabinet. This to

ensure that the coldest product is served.

05.10.2012 METOS Maxiglass Noverta

5. Cleaning

• Before ﬁrst use the cabinet should be cleaned using water and a mild detergent.

• Intensive use requires regular cleaning.

• The MG1/** has a maintenance free condenser.

• Check and clean the magnetic seals on a regular basis. If the seal is not airtight it will have a negative

effect on the refrigeration performance and it needs to be replaced immediately.

The machine must not be cleaned with a pressure washer, either inside or out.

When the ﬂoor is washed, water can splash up under the machine and damage the components.

These have not been designed to withstand being washed with water. Do not wash the ﬂoor within 1

metre of the appliance.

Pressure washers have special protective cases which can be ﬁtted to prevent water splashing.

Do not use aggressive abrasives or detergents.

Do not dismantle any ﬁxed components when cleaning the machine unit.

The machine must not be cleaned with pressure water.

Indice

Altri manuali Metos Accessori

Metos

Metos TC60SS Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente