Metro DataVac TT-2X4 Manuale utente
DELIBERATELY MADE BETTER IN THE U.S.A®
A. Two 4HP 2 Stage Dual Power Motors (MVC-157D)
B. 10 ft. Heavy Duty Hose (MVC-56D)
C. Heavy Duty Blower Nozzle (MVC-195)
D. Air Flare Nozzle (MVC-195AB)
E. Mounting Plate (MVC-DBLMNTGPLT)
F. Handle (MVC-81A)
G. On/Off Switches (MVC-74DA)
INSTRUCTION MANUAL
MODEL TT-2X4
AIR FORCE TWIN TURBO
The AIR FORCE TWIN TURBO Super High Velocity Dryer
conveniently mounts to the wall. Make sure the dryer is mounted
securely with Mollies or Wall Anchors. Plywood can also be
used to properly mount the dryer to the wall.
Metro will not be responsible for damage to dryers not
properly mounted.
SERVICE
CAUTION
DO NOT DROP THIS APPLIANCE. MOTOR MALFUNCTION
CAUSED BY PRODUCT BEING DROPPED IS NOT COVERED UNDER
WARRANTY.
Normal maintenance, such as Motor Brush replacement, can be made at
your local service shop. Motor Brush life is approximately 500 Hours.
Brushes should be checked between 200-250 hour intervals.
Filter life is dependent on use. Check and replace when required.
(C) can be connected to the Hose end.
3. To turn machine on, flip the toggle switch from Off to On one at a
time. Motors can be used independently or simultaneously for
maximum power.
The two motors allow you to set the airflow and temperature at two
different levels.
CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK!
2. Connect Hose (B) to end of “Y” shaped extension. The Air Flare (D)
or Nozzle
***READ ALL INSTRUCTIONS BEFORE USE***
AIR FORCE TWIN TURBO
Model TT-2X4
1. Insert the grounded Power Supply Cord into a grounded outlet.
IMPORTANT: PRODUCT MUST BE GROUNDED.
WARNING: INPROPER CONNECTION OF THE EQUIPMENT
GROUNDING
Indice
Altri manuali Metro DataVac Deumidificatore
