MFG EXMICRO2i Manuale utente
2
Thank you for purchasing this product
The Simplified MFG EXMICRO2i is designed to provide years of reliable service. At Simplified
MFG, we want the experience with this device to be the best possible and are committed to
helping achieve that experience.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes,
surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly
recommended to protect and extend the life of your equipment. A HDSURGE is highly
recommended on cable and satellite boxes.
Table of Contents
1. Introduction...................................................................................................... 2
2. Features ............................................................................................................ 3
3. Package Contents ............................................................................................. 3
4. Specifications.................................................................................................... 4
5. Operation Controls and Functions .................................................................... 5
5.1 Transmitter Panel..................................................................................... 5
5.2 Receiver Panel.......................................................................................... 6
5.3 IR Pin Definition....................................................................................... 6
6. Application Example ......................................................................................... 7
7. Warranty Information…..……….……...………………………………………………… 8
8. Contact Information.……….……………………………………………………………… 8
1. Introduction
The EXMICRO2i can extend an HDMI2.0b (18Gbps) high-definition audio and video signal
and two-way IR up to 50 meters (164 feet) between transmitter and receiver over a single
Cat5e/6/7 cable. The EXMICRO2i supports resolutions up to 4K2K@60Hz 4:4:4, up to
18Gbps, and HDCP 2.2/1.4. In addition, the EXMICRO2i extender is equipped with two-
way IR which allows for source and display control, EDID override settings, a HDMI loop
output.
The EXMICRO2i extender is one of if not the most efficient HDMI extenders available
today. The current draw is typically less than ¼ the normal current draw making this
device more efficient and smaller.
3
2. Features
•HDMI 2.0b, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
•Supports input and output video resolution up to 4k2k@60Hz 4:4:4 up
to 18Gbps
•Supports HDR/HDR+
•Distance up to 164ft/50m @ 4k or 1080p
•Compact size
•Two-way IR transmission HDMI loop output
•EDID override (copy display/ 1080p 2 ch./ 4K 2ch./ copy loop out
•Single power supply –can be powered from either the RX or TX
3. Package Contents
•1× HDMI 18Gbps transmitter
•1× HDMI 18Gbps receiver
•1× IR Blaster (1.5m length)
•1× 20~60KHz IR Receiver (1.5m length)
•1× 12V/1A Locking Power supply
•4× Mounting Ears
•1× User Manual
4
4. Specifications
Technical
HDMI Compliance
HDMI 2.0b
HDCP Compliance
HDCP 2.2 / HDCP 1.4
Video Bandwidth
18Gbps
HDR Formats
HDR/HDR10+
Video Resolution
Up to 4K60Hz 4:4:4
Color Space
RGB / YCbCr 4:4:4, YCbCr 4:2:2/4:2:0, YUV 4:4:4
Color Depth
8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr
4:2:2/4:2:0) 8-bit (4K60Hz 4:4:4)
HDMI Audio Formats
LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby
TrueHD, Dolby Digital Plus (DD+), DTS-ES, DTS
HD Master, DTS HD-HRA, DTS-X
ESD Protection
Human body model —±8kV (Air-gap discharge)
&±4kV (Contact discharge)
Connections
Transmitter
Inputs: 1x HDMI Type A [19-pin female]
1 x IR in [3.5mm Stereo mini jack]
1x SERVICE [Micro USB, Update port]
Outputs: 1x HDMI Type A [19-pin female]
1x IR out [3.5mm Stereo mini jack]
1x CAT out [RJ45, 8-pin female]
Receiver
Inputs: 1x IR in [3.5mm Stereo mini jack]
1x CAT in [RJ45, 8-pin female]
1x SERVICE [Micro USB, Update port]
Outputs: 1x HDMI Type A [19-pin female]
1 x IR out [3.5mm Stereo mini jack]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
Transmitter / Receiver:
90mm/3.5” [W] x 68mm/2.625”[D] x
15mm/.75” [H]
Weight
Transmitter: 160g, Receiver: 155g
Power Supply
Input: AC 100 - 240V 50/60Hz
Output: DC 12V/1A
Power Consumption
3.84 W
Op. Temperature
32 - 104°F / 0 - 40°C
Storage Temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no condensation)
Distance
4K
1080p
CAT5e
147ft / 45M
147ft / 45M
CAT6/6a/7
164ft / 50M
164ft / 50M
5
5. Operation Controls and Functions
5.1 Transmitter Panel
❻ ❶❷ ❹ ❸ ❺ ❼ ❽ ❾
Number
Name
Function description
1
HDMI Out
HDMI loop output port, connect to HDMI display device such
as TV or Projector with an HDMI cable.
2
HDMI In
HDMI input port, connect to HDMI source device such as
Media server or other 4K source
3
CAT Out
Connect to CAT IN port on the receiving end with a CAT6
cable.
4
Power LED
(Green)
The LED will illuminate when the transmitter is powered on.
5
Data signal
LED (Orange)
The LED will illuminate when the transmitter and the
receiver have signal transmission (link)
6
SERVICE port
For firmware updated use.
7
IR In
Connect to IR receiver (included). The IR signal is then sent
to the IR Out to the IR Blaster at the receiver.
8
IR Out
Connect to wideband IR Blaster (included). The IR signal is
from the IR IN port of the receiver.
9
DC 12V
Plug DC 12V/1A power supply into the unit and connect the
adapter to an AC outlet.
(Note: The EXMICRO2 can be powered from either the RX
or the TX by 12V/1A power adapter, only one supply is
needed)
EDID information is copied from the display at the RX
EDID is preset to 4K @ 60Hz. Stereo
EDID is preset to 1080p Stereo
EDID is copied from the HDMI out at the TX
6
5.2 Receiver Panel
❺❶❸ ❷ ❹❻❼❽
Number
Name
Function description
1
HDMI Out
HDMI output port, connect to HDMI display device such as
TV or Projector with an HDMI cable.
2
CAT In
Connect to CAT Out port on the transmitter end with a
CAT6 cable.
3
Power LED (Green)
The LED will illuminate when the receiver is powered on.
Power can come from power supply or via category cable
4
Data signal
LED (Orange)
The LED will illuminate when the transmitter and the
receiver have signal transmission (link).
5
SERVICE port
For firmware update use.
6
IR In
Connect to wideband IR Receiver. The IR signal will be
transmitted to the IR Out port of the transmitter.
7
IR Out
The IR from the TX IR In will be transmitted through the
IR blaster connected here.
8
DC 12V
Plug DC 12V/1A power supply into the unit and connect
the adapter to an AC outlet.
(Note: The EXMICRO2i can be powered from either the RX
or the TX by 12V/1A power adapter, only one supply is
needed)
5.3 IR Pin Definition
7
IR Use Example:
HDMI
HDMI
Source
HDMI
IR
IR
IR
Cat6/6A/7/8
IR
6. Application Example
8
7. Warranty
Should you feel that this product does not function adequately due to defects in
materials or workmanship, we (referred to as “the warrantor”) will, for the length of
the period indicated below (starting from the original date of the purchase) either a)
repair the product with new or refurbished parts. Or b) Replace the product with new
or refurbished product. All Simplified MFG products are covered by a 3-year PARTS
and LABOR warranty. During this period there will be no charge for unit repair,
replacement of unit components or replacement of the product if deemed necessary.
The decision to repair or replace is made by the warrantor. The purchaser must mail
in the product during the warranty period. This limited warranty only covers the
product purchased as new and is extended to the original purchaser only. It is non-
transferrable to subsequent owners, even during the warranty period. A purchase
receipt or other proof of purchase date is required for the limited warranty service.
8. Contact Information
Sales and Tech Support
P. 833-HDMI-411 (833-436-4411)
Simplified MFG • 550 W Baseline Rd Ste 102-121 • Mesa AZ 85210
© Copyright Simplified MFG 2021
Simplified MFG • 550 W Baseline Road Ste 102-121 • Mesa, AZ 85210 • www.simplifiedmfg.com • 833-HDMI-411 (436-4411)
HDMI
HDMI
Source
EXMICRO2i Quick Start Guide
HDMI
• The EXMICRO2i is a 50m HDMI 2.0b
(18Gbp)/70m 1080p HDR Extender that
is powered at one end (Either)
• Make sure supply is connected to TX
before connecting to AC outlet
• IR Commands are sent to and from
both the TX and the RX allowing IR to
be sent from source end to display
and/or from display end to source end
IR
IR
IR
Cat6/6A/7/8
IR
Simplified MFG ●550 W Baseline Rd. Ste #102-121 ●Mesa, AZ 85210 ●info@simplifiedmfg.com ●844-821-5455
How to wire an EXMICRO2
Wiring layout
1. The category cable can be any category cable that is the following: Cat5e/Cat6/Cat6A/Cat7/Cat8
1. El cable de categoría puede ser cualquier cable de categoría que sea el siguiente: Cat5e / Cat6 /
Cat6A / Cat7 / Cat8
1. Le câble de catégorie peut être n'importe quel câble de catégorie qui est le suivant :
Cat5e/Cat6/Cat6A/Cat7/Cat8
2. The Category cable needs to be terminated in the 568b protocol shown above
2. El cable de categoría debe terminarse en el protocolo 568b que se muestra arriba
2. Le câble de catégorie doit être terminé dans le protocole 568b indiqué ci-dessus
Indice
