· Download the app and install it
1. Install:
a) For iPad and iPhone:Search “Mic-Fi” in App Store to download and install it.
b) For Smart-Phone and Tablet Android: Search “Mic-Fi” in Google Play to
download and install it.
c) For Windows and Mac PC: Download the Mic-Fi Software by
www.mic-fi.com
2. After powered ON the USB/WIFI Streamer, wait for ~20 seconds until the led of Wi-Fi
indicator are solid.
3. Check the wireless connection on your Phone/Tablet or PC and a list of available
networks will appear. Select the SSID “Wi-Fi2SCOPE_xxxxxx” network from the list to
connect; the network “Wi-Fi2SCOPE_xxxxxx” requires a password: enter the password
“12345678” and click Ok.
4. Once connected, please wait for about 5 seconds to open the “Mic-Fi” application to
see your images. If there is no video display, please close and restart “Mic-Fi” app again.
The Wi-Fi indicator LED flashes and video stream signal should be displayed in the
app. Video streaming can be broadcasted to many devices, but the frame rate of live
video will decrease as the number of receiving devices increase.
Setting for Internet and Microscope’s Wi-Fi Connection at the same time
You can use the Wi-Fi network of the microscope and that of the PC / SmartPhone / Tablet at the same time
1. To access the internet by Wi-Fi connection at the same time the Wi-Fi microscope is
working, open an internet browser, input http://10.10.1.1 and click “enter”. A pop-up
window will require you to enter a username and password, please enter: admin and
admin, and then this window should appear:
6
