Functions Command Format Explanation
Parameter Inquiry PARAM#
Status Inquiry STATUS#
BATTERY: XX% (Built-in Battery Power Percent)
INTERNET: CLOSED (No Network)
FAILED (Connecting Network or Failure) SUCCESS
(Connected to Network）
NET: NONE (No GSM Signal) , HIGH / MED /
LOW (Signal Strength) 18
GPS: CLOSED (GPS Module Closed) FIXED,N
(Positioned and satellite number)
UNFIX,0 (Not Positioned yet)
SPEED:30KM/H
SENSOR: ON/OFF (Sensor on or off), LEVEL: 3
(Sensitivity level 1-9)
STATE: ARM (Arm or Disarm)
Alarms Parameters
Latitude & Longitude
Inquiry
Map URL Inquiry
WHERE#
URL#
ALARM#
ID: 19172012644 (ID number of device)
STATE: ARM(DISARM)(Defense status of device)
SPEED: ON/OFF(alarm status); 30km/h(alarm value);
0/1/2(alarm way)
SHIFT: ON/OFF(alarm status); 300m(alarm value);
0/1/2(alarm way)
VIBRATE: ON/OFF(alarm status);3(sensitivity level);
0/1/2(alarm way)
LOW BATTERY: ON/OFF(alarm status);1/2/3
(alarm way)
NOTE: Alarm Ways: 0/1/2 ( 0 :GPRS only, 1: SMS+
GPRS, 2 : GPRS+SMS+phone call )
Working Mode Setting MODE,A,T1,T2#
GMT,E,8# (if no half time zone)
GMT,W,9,30# (if has half time zone)
NOTE: Parameter : E / W；0 ~ 12; 0/15/30/45
A=1/2/3, 1:Tracking mode 2:Power saving mode
3: Hibernation mode; Default mode: 1
A=1
T1：upload interval of GPS data in moving status,
unit: second,10-3600s; default: 10s
T2：upload interval of GPS data in static status,
unit: second, 180-65535s; default: 3600s
A=2
T1: interval start time,format: HH:MM
T2: time interval,range: 1-72
unit: hour,default interval: 24hours
A=3
T1: interval start time,format: HH:MM
T2: time interval,range: 1-72
unit: hour,default interval: 24hours
Time Zone Setting GMT,Time zone orientation,
Whole Time Zone[,Half Time Zone]#
Note: The difference between mode 2 and mode 3 is
that in mode 2, sms commands and phone calls can
wake up the device, but vibration cannot. In mode 3,
only manual restart operation can wake up the
device, after that, device will work for 5 minutes and
then go to sleep.
