Installation and adjustment must be performed by approved personnel only.
Repair and/or alteration to the control box and motor are prohibited.
Power should be switched off during installation and service.
Switch power off when not in use.
Power supply 100V AC (Control Box Power Input AC 100V).
Keep away from any item which creates steam, heat or a humidifier.
Do not touch when a lightning storm occurs.
Should a burning smell be detected, switch power off at fuse.
Contact your MICOM representative immediately.
Do not put hands, flammable liquids, gases or items affected by high temperatures onto operator during
operation.
Do not spray pesticides or detergents onto operator directly.
Ensure sliding door travel area is clear before switching power switch ON.
Do not hit or restrict door whilst moving.
Keep fingers, clothing and hair clear of belt and all moving parts.
Protective gloves should be worn when handling metal parts.
