Micos Pollux Drive Manuale utente
Pollux
MICOS GmbH Version 2.0
Manual
high resolution positioning drive
Manual Pollux
Content 2
Contents
Symbols in this documentation...............................................5
Chapter -1- Introduction...................................................................6
Presentation of the controller ........................................................7
Function survey ..............................................................................8
Dimensions Pollux Drive ................................................................9
Dimensions Pollux Box ..................................................................9
Chapter -2- Installation .....................................................................10
Safety notice.....................................................................................11
Declaration by the manufacturer....................................................12
Power supply....................................................................................13
Programming via RS-232 interface ................................................14
Important notices about the RS-232 interface ........................14
RS-232 interface configuration ...............................................14
Motor characteristic adjustments ..................................................15
Commands to adjust the speed torque and holding torque.15
Speed-Torque characteristic .........................................................16
Pollux-1...................................................................................16
Pollux-2...................................................................................17
Pollux Box with seperated motor ............................................18
Limit switches ..................................................................................19
Limit switch inputs ..................................................................19
Limit switch functions..............................................................19
Switch types ...........................................................................19
Procedure to configure the limit switch inputs ........................20
Limit switch wiring via RJ45 connector...................................21
Safety device (Option) ....................................................................22
Principal function ....................................................................22
Safety switch wiring (Option) ..................................................23
Chapter -3- Connectors ....................................................................24
Limit switch connector ( 1 x 10 pin RJ45 ) ...................................25
Manual Pollux
Content 3
RS-232 connectors (2 x 8 pin RJ45 connector) ............................26
RS-232 connector with "safety device" support (Option) ...........27
Power Input (3 Pin circular connector) .........................................28
Motor connector Pollux-Box with D" Type 9 (Standard) ............29
Motor connector Pollux-Box with "D" Type 15 ............................30
Pollux Box motor wiring .................................................................31
2 Phase Stepper Motor...........................................................31
For your notices: .............................................................................32
Manual Pollux
4
About this documentation
This documentation provides detailed informations on the
hardware features of Pollux Drive or Pollux Box.
Software informations about the Venus-2 command language
are provided in a additional manual.
Manual Pollux
5
Symbols in this documentation
To clarify the content following symbols are used.
Symbol Description
Warning.
The informations beside this sign
must be observed strictly
Hint
This function can be released with
a release code
Venus-2 command, see handbook
Option
Venus-2
Chapter 1
Manual Pollux
Introduction 6
Introduction
Manual Pollux
Introduction 7
Presentation of the controller
Pollux is a extremely compact combination of a high torque
stepper motor and a intelligent positioning controller.
The 1.8° / 0.9°, 42 mm sq. motor is combined with a powerful
motor electronic that provides a calculational step resolution
of minimum 0.001µm and a maximum speed of 40 rev./s.
Controller programming and configuration is executed via a
RS232 interface which allows velocity moves, point-to-point
moves and multiple unit control with only one communication
port.
Optional a CAN-Bus interface is provided.
The ASCII programming language is termed Venus-2.
A On-Board flash memory enables non volatile parametrizing
and software updates via the serial line.
Your dealer will support you if a firmware update is
necessary.
Pollux is available in different variants, which differ from motor
speed, holding torque and the motor assembly.
RS-232+Power
RS-232+Power
Power 24V
Limit switch input
(+Safety device)
Manual Pollux
Introduction 8
Function survey
Functions
• Multiple connection, up to 16 devices
• Phase current max 1.2A/Phase
• Velocity: 12.5, 25, 40 rev/s
• Minimum step resolution = 0.001µm
• Limit switch inputs
Homing command and range measure
• RS-232 Interface, 19200 Baud
• Command language
(Venus-2 for Pollux)
• Positioning modes:
Absolute, relative, velocity controlled, synchronous,
• Power Up functions
• Safety device (Motor disable function)
• Firmware update via RS-232 (115000 Baud)
• CAN-Bus Interface (Option)
Manual Pollux
Introduction 9
Dimensions Pollux Drive
Dimensions Pollux Box
Pollux Type 1: L=87mm
Pollux Type 2: L=87mm
Pollux Type 3: L=100mm
Pollux Type HT: L=120mm
Chapter 2
Manual Pollux
Installation 10
Installation
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Micos Controllori
