MICROPOINT qLabs Data Manager Manuale utente
Data Manager
qLabs®
Installation Guide
1
qLabs®Data Manager
Installation Guide
1. Open the installation DVD and double click the “setup.exe” to launch
setup.
2. The Welcome screen will appear as below. Click Next to enter the
Customer Information window.
3. Input the customer information and click Next.
ENGLISH
EN
2
4. Click Change to change the installation path. When you finished
specifying the path, click OK to complete the pop-up window. Click
Next to enter the next screen.
Specifying the installation path
5. Select Complete from the Setup Type screen and click Next.
3
6. Click Install in the pop-up window and start the installation.
7. The progress bar will appear during the installation.
8. When you finished the installation, click Finish to close the pop-up
window.
4
9. The USB Driver Installation window will pop up automatically after
finishing the installation. If you need to install the Driver, select Yes.
If the Driver has been installed, select Cancel to close the pop-up
window and finish the installation.
10. Click on Next from the Driver Installation window to enter the next
screen.
11. Select I agree this agreement (A) and click Next.
5
12. Once the installation is finished, the driver will be shown on the screen.
Click Finish to close the pop-up box.
Altri manuali MICROPOINT Attrezzature mediche
MICROPOINT
MICROPOINT qLabs ElectroMeter Q-3 Pro Manuale utente
MICROPOINT
MICROPOINT qLabs QSV-1-CL Pro Manuale utente
MICROPOINT
MICROPOINT eStation II MBI92 Manuale utente
MICROPOINT
MICROPOINT qLabs ElectroMeter Plus Manuale utente
MICROPOINT
MICROPOINT qLabs ElectroMeter Q-1 Manuale utente
MICROPOINT
MICROPOINT qLabs ElectroMeter Manuale utente
MICROPOINT
MICROPOINT mLabs Smar Manuale utente
MICROPOINT
MICROPOINT qLabs Vet QV-3 Plus Manuale utente
MICROPOINT
MICROPOINT qLabs ElectroMeter Q-3 Plus Manuale utente
MICROPOINT
MICROPOINT qLabs Vet Manuale utente
