microSYST migra AD Manuale utente
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
User's Manual
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
Page 2
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
Table of Contents
1GENERAL 3
2OVERVIEW 3
3TECHNICAL DATA 4
3.1 Device Details 5
3.2 Notes for the start-up 6
3.3 Device Configuration 7
3.3.1 Settings with “micon AD” 7
3.3.2 Settings with “micon” 8
4CONNECTOR PIN ASSIGNMENTS 11
5APPENDIX 13
5.1 Maintenance and Care 14
5.2 Warranty / Liability 15
5.3 Versions Overview 16
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
Page 3
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
1 General
This device can be used universally for displaying production data, or as an
information board.
The modular design allows for cost-effective models of various sizes, and
with different character heights and numbers of digits.
Thus integration into existing equipment or systems is easy and simple.
2 Overview
PC (RS232)
migra AD
4 A-D Inputs
Specific functions
Parameter setting
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
Page 4
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
3 Technical Data
Display type: LED dot matrix display
Display color: type SC: single colour, type MC multicolour
Operating voltage: 230 V / 50 Hz, 110 V / 60 Hz or 24 VDC ±20 %
View: single or double sided
Channels: 1 to max. 4
Display: 0 to ±19999 or customer specific
Display range and
decimal point: adjustable via software
Input range: 0 to ±10 VDC, 0 to 20 mA
Labelling: upon request
Housing: industrial version, powder coated aluminium
Housing dimensions: see chapter “Device Configuration”
Mounting: articulated arm, angle bracket, hanging with chain or
mounting frame
Protection: IP54 or IP65
Operating temperature: 0 to +50 C (optionally –20 to +50 °C)
Storage temperature: -25 to +70 C
Features: under and overflow display, relay output (optional)
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
Page 5
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
3.1 Device Details
Number of Lines:
1 2 3 4
Number of Digits:
1 2 3 4 5 Signed
Display range and dimension:
Line 1: _____________ - _____________ ________
Line 2: _____________ - _____________ ________
Line 3: _____________ - _____________ ________
Line 4: _____________ - _____________ ________
Input range:
Line 1: 0 to 20 mA 0 to 10 VDC _____________
Line 2: 0 to 20 mA 0 to 10 VDC _____________
Line 3: 0 to 20 mA 0 to 10 VDC _____________
Line 4: 0 to 20 mA 0 to 10 VDC _____________
View:
single sided double sided
Operating voltage:
230 V / 50 Hz 110 V / 60 Hz 24 V DC
Protection:
IP54 IP65
Housing dimensions: _________x_________x_________mm
Housing colour: RAL _____________
Housing material: Aluminium profile
Stainless steel
Sheet material
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
Page 6
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
3.2 Notes for the start-up
When putting on the power supply, the following sequence has to be ob-
served:
oConnect the power supply cable to the display.
oConnect the power supply cable to the power supply.
Directly after connecting the A-D inputs, the display shows the corresponding
values.
When disconnecting the power supply, the following sequence has to be ob-
served:
oDisconnect the power supply cable from the power supply.
oDisconnect the power supply cable from the display.
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
Page 7
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
3.3 Device Configuration
The device is already configured at the time of delivery. However, if you want
to do some changes, you can use the tools “micon AD” and “micon”.
The software “micon AD” serves for settings regarding the A-D converter.
The software “micon” serves for display configuration.
3.3.1 Settings with “micon AD”
Output characteristics
Limiting values
Update interval
Number of decimal places
Suppressing of leading zeros
Rounding output value
Increment
Averaging
Blinking rate
Bargraph
Status outputs
Please refer to the user’s manual “micon AD” for further information’s.
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
Page 8
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
3.3.2 Settings with “micon”
Character set
Font size
Display colour
Length of variables
Start coordinates
You must specify variables with the configuration software “micon” in order
to display values. Every variable corresponds with a measuring channel:
V0 -> measuring channel 1
V1 -> measuring channel 2
V2 -> measuring channel 3
V3 -> measuring channel 4
Please see user’s manual “micon” for additional information concerning the
display configuration.
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
Page 9
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
Example Configuration:
The display has only one current input and displays this value immedi-
ately after the power-up. The value range is from 0.00 to 9.99.
If only measuring channel for the current is used, you need measuring chan-
nel 3, which corresponds with variable 2. It’s not possible to create only one
variable with the number 2, since the variable numbers are assigned auto-
matically. This means, variables 0 and 1 must be specified in addition, even
if their content is not relevant.
Depending on the character set, the option “monospaced” must be set.
For more information concerning variables see user’s manual “micon”.
migra AD
Graphics Compatible Large Format LED Display with A-D Converter
Page 10
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de
The command for querying variable 2 must be added to the macro list in or-
der to display the value immediately after the startup.
Please see user’s manual “micon” for further description.
Indice
Altri manuali microSYST Monitor
microSYST
microSYST migra MPB PB Manuale utente
microSYST
microSYST miline S1X4 Manuale utente
microSYST
microSYST migra Ethernet/IP Manuale utente
microSYST
microSYST mipan PN Manuale utente
microSYST
microSYST migra Serial Manuale utente
microSYST
microSYST mipick MP Series Manuale utente
microSYST
microSYST migan MPB ModbusRTU Manuale utente
microSYST
microSYST migra S1X4 Manuale utente
microSYST
microSYST migan ModbusTCP Manuale utente
microSYST
microSYST miline S1X4 Manuale utente
microSYST
microSYST migra MPB IZ Manuale utente
microSYST
microSYST migra MPB EN TCP/IP Manuale utente
microSYST
microSYST mipan AD Manuale utente
microSYST
microSYST migan BCD Manuale utente
microSYST
microSYST migra PN Manuale utente
microSYST
microSYST migra MPB CAN Manuale utente
microSYST
microSYST Migan MPB FI/SI Manuale utente
microSYST
microSYST migan Manuale utente
microSYST
microSYST migan MPB BCD Manuale utente
microSYST
microSYST migan MPB AD Manuale utente
