Microtronics MyDatasensMINI H2S 1000 Manuale utente

User manual for the portable device

myDatasensMINI H2S 1000

Rev. 01 valid from:

lFirmware version: 01v004

lModem version: ---

lServer version: 36.1

lHardware version: 1.4

User manual

300554

Microtronics Engineering GmbH | www.microtronics.at

Hauptstrasse 7 | 3244 Ruprechtshofen | Austria

Tel +43 2756 77180 23 | Fax +43 2756 77180 33 | support@microtronics.at

Chapter 1 Inhaltsverzeichnis_en
Chapter 1 Inhaltsverzeichnis_en
User manual for the portable device myDatasensMINI H2S 1000 1
Chapter 1 Inhaltsverzeichnis_en 3
Chapter 2 Declaration of conformity 9
2.1 Declaration of conformity - Appendix 10
Chapter 3 Technical data 11
Chapter 4 General specifications 13
4.1 Translation 13
4.2 Copyright 13
4.3 General descriptive names 13
4.4 Ex protection 14
4.5 Safety instructions 14
4.5.1 Use of the hazard warnings 15
4.5.2 General safety instructions 15
4.5.3 Safety and preventative measures for handling wireless modules 15
4.5.3.1 Safety and precautionary measures for the wireless module installation 16
4.6 Overview 16
4.7 Intended use 17
4.8 General product information 17
4.9 Device labelling 18
4.10 Installation of spare and wear parts 18
4.11 Storage of the product 19
4.12 Obligation of the operator 19
Chapter 5 Functional principle 21
5.1 Determining the H2S concentration 22
5.1.1 Determining the raw value 23
5.1.2 Calculation of the calibrated H2S measurement value 23
5.2 Determining the temperature 24
Chapter 6 Storage, delivery and transport 25
Rev. 01 3

1 Inspection of incoming deliveries 25
2 Scope of delivery 25
3 Storage 25
4 Transportation 25
5 Return 26
Chapter 7 Installation 27
1 Dimensions 27
2 Installing the myDatasensMINI H2S 1000 27
2.1 Suspended installation 29
Chapter 8 Initial Start-Up 31
1 User information 31
2 General principles 31
3 Commissioning the system 31
4 Testing communication with the device 33
4.1 Testing communication between myDatasensMINI H2S 1000and DeviceConfig 33
4.2 Testing communication between myDatasensMINI H2S 1000and the myDatanet
server 34
Chapter 9 User interfaces 35
1 User interface on the myDatasensMINI H2S 1000 35
1.1 Operating elements 35
1.1.1 Display 36
1.1.2 Acceleration sensor 37
2 User interface on the myDatanet-Server 37
2.1 Site configuration 37
2.1.1 Site 38
2.1.2 Comments 38
2.1.3 Measurement channels 38
2.1.3.1 Cross sensitivity of the H2S sensor 39
2.1.4 Internal channels 39
2.1.5 Basic setting 39
4Rev. 01

Chapter 1 Inhaltsverzeichnis_en
2.1.6 FTP export settings 40
2.2 Device configuration 40
2.2.1 Comments 40
2.2.2 Measurement instrument 40
Chapter 10 DeviceConfig 43
1 General 43
2 Prerequisites 43
3 Functional principle 44
3.1 USB radio transmitter 45
4 Installation 46
4.1 Installing the drivers for the USB radio transmitter 47
5 Menu of the DeviceConfig 48
5.1 Settings 48
5.1.1 Options 48
6 Establishing a connection to a device with a wireless M-bus interface 49
7 "Instrument" tab 52
8 "Zero" tab 53
9 "Calibration" tab 54
9.1 "Protocol Fields" program window 56
10 "Sync" tab 58
10.1 Existing connection to the myDatasensMINI H2S 1000 59
10.2 No connection to a device 60
11 "Data" tab 60
11.1 "Measurement Data" program window 61
11.1.1 "Chart Configuration" program window 63
12 Recommended procedure 64
12.1 Synchronisation with the DeviceConfig configuration program 64
12.2 Synchronisation with the myDatanet server 67
12.2.1 Internet connection available when reading out the data 67
12.2.2 No Internet connection when reading out the data 72
Rev. 01 5

Chapter 11 myDatanet server 77
1 Overview 77
1.1 Explanation of the symbols 77
2 "Customer" area 78
3 "Site" area at customer level 79
3.1 Reports 80
3.2 Map view 80
4 Recommended procedure 80
4.1 Creating the site 80
4.2 Assigning a device to the customer 81
Chapter 12 XML interface 83
1 General 83
Chapter 13 Maintenance 85
1 General maintenance 85
2 Maintenance of the H2S sensor 85
2.1 Calibration and zero point adjustment 86
2.1.1 Safety instructions for handling H2S gas 86
2.1.2 Calibration 86
2.1.2.1 Calibration guidelines 87
2.1.2.2 Calibration room equipment 87
2.1.2.3 Calibration process 87
2.1.3 Zero point adjustment 94
Chapter 14 Removal/disposal 97
Chapter 15 Troubleshooting and repair 99
1 General problems 99
Chapter 16 Spare parts and accessories 101
1 Assembly sets 101
2 Other accessories 101
Chapter 17 Document history 103
Chapter 18 Glossary 105
6Rev. 01