Midea IM1800MD Manuale utente
Ice Maker Kit
MODEL: IM1800MD
2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installing the ice maker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Connecting the ice maker to the water supply . . . . . . . . . . . . . . . . . . . . . .14
Tips for using your automatic ice maker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
WARRANTY . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Important Safety Instructions
WARNING
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within your refrigerator.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying your refrigerator.
Introduction
Congratulations on your purchase of a high-quality Midea product. The ice
maker kit works with these models, WHD-663FWEW1, WHD-663FWEB1,
WHD-663FWESS1, WHD-774FWEW1, WHD-774FWEB1 and WHD-774FWESS1.
3
Ice Maker
4Follow all instructions.
5Do not place fingers or hands into the automatic ice making
mechanism while the refrigerator is plugged in. Doing so my expose
you to possible injury.
6Keep your hands away from the ejector mechanism and the heating
element that releases the ice cubes, located on the bottom of the ice
maker.
7Refer all servicing to qualified service personnel. Servicing is required
when the appliance has been damaged in any way, such as the
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the appliance, the appliance has been exposed
to rain or moisture, does not operate normally, or has been dropped.
WARNING
Electric Shock Hazard
Failure to follow these instructions can result in electric shock, re, or
death.
1WARNING–Do not touch the interior of the freezer compartment with
wet hands. This could result in frost bite.
2WARNING–Do not use electrical appliances inside the food storage
compartment of the refrigerator, unless they are of the type
recommended by the manufacturer.
3Unplug the refrigerator before performing user maintenance on it.
4This appliance can be used by children age eight years and older and
persons with reduced physical or mental capabilities or lack of
experience and knowledge if they are given supervision or instruction
concerning the use of the appliance in a safe way and understand the
hazards involved. Children should not play with the appliance.
Cleaning and maintenance should not be performed by children
without supervision.
5If a component part is damaged, it must be replaced by the
manufacturer, its service agent, or similar qualified persons in order to
avoid a hazard.
4
Features
•Produces up to three pounds of ice a day, depending on the size of your
refrigerator.
•18 cu.ft. or larger = 2.8 lbs
•21 cu.ft. or larger = 3.0 lbs.
•Stores up to six pounds of ice
•Prevents overflow by automatically detecting when storage bin is full
•Works with these Midea refrigerators:
WHD-663FWEW1, WHD-663FWEB1,
WHD-663FWESS1, WHD-774FWEW1, WHD-774FWEB1, WHD-774FWESS1
Package contents
Ice maker unit Ice storage bin Plastic water supply tubing
Water valve Water inlet tube (2) Tube clamp
Leveling bracket
screw
Self-drilling
screws (5) Ice maker mounting
screws (2) Plastic clip (2)
Instruction manual
Ice Maker
Ice Maker Kit
MODEL: IM1800MD
5
Ice Maker
Tools and materials needed
You’ll also need:
•A freezer shelf to hold the ice storage bin. If your model does not have
one, contact your dealer to order one.
•Access to a household cold water line with water pressure between 20
and 120 psi.
The water line kit (including copper tubing and shut off valve) are
available in a kit (#5303917950) from your local hardware or plumbing
supply store.
Installing the ice maker
Your Midea refrigerator comes set up for ice maker installation.
1Unplug the refrigerator from the wall outlet.
2Remove the freezer shelf and ice tray rack from the freezer.
Caution
Unplug the refrigerator. To eliminate the danger of electric shock
during installation, you must unplug the refrigerator.
Putty knife Needle nose pliers
or nut driver Adjustable wrench
1/4” OD copper supply
line with compression
nuts and ferrules
Knife
Phillips
screwdriver
Flat blade
screwdriver
Shut off valve
(non self piercing) Water line kit
#5303917950
Electric drill with a
1/4” drill bit
6
3Remove the plug from the inside of the freezer compartment with a
putty knife.
4Peel off the label covering the ice maker hole on the back of the
refrigerator, then remove the foam from the hole with the needle nose
pliers. Retain the foam for future use.
Plug
Remove label
Ice Maker
7
Ice Maker
5Push the water inlet tube into the small hole on back of refrigerator.
Rotate while inserting the tube until the flat surface of inlet tube is
tight against the back of the refrigerator.
6Secure the water inlet tube to the back of the refrigerator with two
self-drilling screws (provided).
7Squeeze together and slide the tube clamp over the fill tube. While still
squeezing the clamp, insert one end of the plastic tube into the fill
tube as far as it will go, then slide the clamp downward to capture the
fill tube in place.
Caution
Leaks may result if the plastic tube is not pushed in as far as it
can go and the tube clamp is not in place over the fill tube.
Fill tube
Water supply tube
Tube clamp
8
8Insert the two ice maker mounting screws into the holes in the freezer
wall. Turn each screw clockwise five times.
9Use needle nose pliers to remove the terminal cover located at the top
of the freezer by first pulling down one side of the cover, then pulling
down the other side. Save the terminal cover for future use in case the
ice maker is removed.
Ice maker
mounting screws
Terminal
Terminal cover
Ice Maker
9
Ice Maker
10 With the ice maker in one hand, plug the wiring harness connector
into the terminal located at the top of the freezer panel. Make sure that
the connection is tight. Make sure the wiring harness is still in the hook
on the back of ice maker.
Wiring harness
connector Terminal
10
11 Mount the ice maker onto the two ice maker mounting screws you
installed in step 9. Make sure that the water inlet tube is sitting inside
the fill cup, then tighten the screws.
12 Adjust the leveling bracket to level the ice maker. The ice maker is level
when the gap between the freezer wall and the ice maker is the same
at the top and bottom.
Ice maker
mounting screws
Fill cup
Water inlet tube
Ice maker
Screws
Leveling bracket
Ice Maker
Indice
Altri manuali Midea Macchina per il ghiaccio
