Midland C1107 Manuale

G10

”Instruction guide

PMR446 TRANSCEIVER |

Midland G10 instruction guide | 1

Index

Programming software (optional) 2

Content 2

Main characteristics 3

Coverage/Range 3

Main controls and parts of the radio 4

Operations 6

Power on/oﬀ and volume adjustment 6

Transmission 6

Monitor 6

Scan 6

Squelch 7

Battery recharge 7

Maintenance 8

Technical speciﬁcations 9

Troubleshooting 10

2 | Midland G10 instruction guide

Thanks for choosing Midland! G10 is a portable transceiver that is free use in

almost all European countries. For further information, we suggest you look

at the “Restrictions on the use” chart.

Midland G10 is a multi-task PMR446 transceiver.

Combining the latest technology in radio communication along with a

sturdy mechanical frame, G10 is the ideal and eﬀective solution for the

professionals who need to stay in touch with the working team (in con-

struction sites, buildings, shows, trade fairs or hotels) or for leisure users

that just want to keep up with friends and family.

Programming software (optional)

Thanks to Midland Programming software PRG10, it is possible to incre-

ase the performance of your radio or to reduce its functionality by disa-

bling some of the default features (CTCSS, TOT...)

For further information, please consult the Programming software ma-

nual.

Any attempt to change frequencies or output power of the radio invali-

dates the approval.

Content

• 1 G10 transceiver

• 1 belt clip

• 1 wall adaptor

• 1 1200mAh Li-ion rechargeable battery pack

• 1 desktop charger

Midland G10 instruction guide | 3

Main characteristics

• PMR446 Transceiver

• Output power: ≤ 500mW ERP

• Channel spacing: 12.5KHz

• Scan

• Vocal tuning

• Battery save

• Monitor

• Squelch

COVERAGE/RANGE

The maximum range depends on terrain condition and is obtained du-

ring use in an open space.

The only limitation to maximum possible range are environmental fac-

tors such as blockage caused by trees,buildings, or other obstructions. In-

side a car or a metallic constructions, the range can be reduced. Normally

the coverage in the city, with buildings or other obstructions is about 1

or 2 Km. In open space but with obstructions like trees, leaves or houses

the maximum possible range is about 4-6 Km. In open space, without

obstructions and in sight, like for example in mountain, the coverage can

be more than 12 Km.

4 | Midland G10 instruction guide

Main controls and parts of the radio

1. Antenna

2. Encoder: rotate clockwise or counter-clockwise to select the desired

channel

3. Power/volume knob- turn clockwise to power on and increase the

volume level. Turn counter-clockwise to decrease the volume level

and power oﬀ.

4. Speaker

5. Built-in microphone

6. Led indicator:

RED: TX;

GREEN: RX.

7. PTT: push this button to transmit, release it to receive.

8. Function key 1: hold down this button to activate the Monitor fun-

ction.

9. Function key 2: not programmed by default

10. External Speaker/Mic Jack- allows the connection with external de-

vices such as headsets, microphones.

Midland G10 instruction guide | 5

MIC

PTT

2 3

MIC

PTT 7

6 | Midland G10 instruction guide

Operations

Power on/oﬀ and volume adjustment

Rotate the Power/Volume knob clockwise to turn the radio on.

Rotate the control clockwise /counter-clockwise to adjust the volume le-

vel as you prefer.

To turn the radio oﬀ, rotate the control counter-clockwise till hearing a

mechanical “click”.

Transmission

To communicate, all radios in your group must be set to the same chan-

nel.

Brieﬂy press the Function key 1 to enable the Monitor feature in order

to make sure that the frequency is not busy, then press the PTT button.

For a maximum clarity, hold the device at a distance of about 4/10 cm.

Release the PTT key to receive.

Only one user at a time can talk during radio communications. Therefore, it is

important not to transmit when you are receiving a communication and use

the transmission mode sparingly to allow other users to talk.

Transmission consumes a signiﬁcant amount of energy and should therefore

be used sparingly to prolong the battery life.

If you are unable to contact a station that you have no problems in receiving,

the station may be using CTCSS tones or DCS codes.

Monitor

The Monitor feature is for excluding (opening) the Squelch, in order to

listen to signals that are too weak to keep the Squelch permanently ope-

ned.

Hold down the Function key 1 to enable such function.

Scan

This function can be activated only by means of the optional program-

Midland G10 instruction guide | 7

ming software.

To enable the Scan function, all 16 channels must be programmed.

If you turn on the radio on channel 16, the scanning will automatically

start.

Whenever any signal is detected, the scanning will stop on a busy chan-

nel.

If the PTT is pressed, you will transmit on the latest busy channel.

Channel 16 is the priority channel, therefore if you don’t pick up any

signal when you press PTT, the radio will transmit on channel 16.

Squelch

The Squelch function suppresses noises on free channels and allows to

receive even weak signals.

G10 has 10 diﬀerent Squelch levels that can be set by programming sof-

tware: 0 means that the Squelch is turned oﬀ; from level 1 to level 9 you

will have diﬀerent levels of noise reduction. The higher is the level, the

louder will be the Squelch.

By default, the Squelch level of G10 is set on level 4.

Make sure you do not set an excessively high squelch level because in this

case you may not be able to receive weaker signals. On the other hand an

excessively low Squelch value could enable the Squelch even when no si-

gnals are present.

Squelch must always be adjusted when no signals are present.

The Time Out timer is settable from 30 sec to 270 sec. only through the

programming software.

This feature is disabled by default.

Battery recharge

G10 is equipped for using a 7,4V Li-ion rechargeable battery pack which

can be recharged connecting the socket of the AC/DC wall adaptor to a

mains power socket and inserting the jack of the wall adaptor into the

desktop charger plug.

It takes 4-5 hours to fully recharge the radio.

For maximum battery life, we recommend charging the battery pack

when the G10 is oﬀ and the battery pack is fully discharged.

8 | Midland G10 instruction guide

! Using a diﬀerent battery charger other than the one speciﬁed can cau-

se damage to your device or may even cause explosions and personal

injuries.

The Battery power saving feature enables a reduction in consumption of

up to 50%. If it has been set, it automatically activates when the transcei-

ver does not receive any signal for more than 5 seconds in order to save

the battery life. Power saving can be disabled only through Programming

software.

Maintenance

Your G10 was designed to fulﬁll any warranty obligations and to enjoy

this product for many years.

As for all the electronically devices, we recommend you to follow this few

suggestions:

• Do not attempt to open the unit. Non-expert handling of the unit may

damage it and/or annul the warranty.

• When using regulated power supply, take notice of power voltage,

that must be between 6V and 8V to avoid damages.

• High temperatures can shorten the life of electronic devices, and warp

or melt certain plastics. Do not store the radio in dusty or dirty areas.

• Keep the Radio dry. Rainwater or damp will corrode electronic circuits.

• If it appears that the Radio diﬀuses peculiar smell or smoke, please

shut oﬀ its power immediately and take oﬀ the charger or battery

from the Radio.

• Do not transmit without antenna.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Midland Ricetrasmettitore

Midland

Midland M24-S Manuale utente

Midland

Midland ALAN 54 E Manuale utente

Midland

Midland ALAN 121 Manuale utente

Midland

Midland CT990 Manuale

Midland

Midland G10 Manuale

Midland

Midland ALAN 8001S EURO Manuale utente

Midland

Midland M24-S Manuale utente

Midland

Midland Alan 78 Plus Multi B Manuale utente

Midland

Midland CT2000 Manuale

Midland

Midland G8 Manuale utente

Midland

Midland VHF-FM 15 watt 220 MHz Mobile Transceiver Manuale utente

Midland

Midland 8011869177026 Manuale

Midland

Midland 70-1545 Manuale utente

Midland

Midland PACIFIC Manuale utente

Midland

Midland Syn-Tech 70-342XL Manuale utente

Midland

Midland CT590S Manuale utente

Midland

Midland G7E XT Manuale utente

Midland

Midland LMR 70-1526A Manuale utente

Midland

Midland 88 Manuale utente

Midland

Midland 70-066 Manuale utente

Midland

Midland G5 C Manuale utente

Midland

Midland ALAN 48 EXCEL Manuale utente

Midland

Midland G5 Manuale utente

Midland

Midland Ocean Manuale utente

Manuali Ricetrasmettitore popolari di altre marche

Yaesu

Yaesu FT-7B Manuale utente

Kenwood

Kenwood ProTalk TK-3201 Manuale utente

Texas Instruments

Texas Instruments TLK10232 Manuale utente

Mizuho

Mizuho MX-2 Guida del prodotto

Kenwood

Kenwood TK-3180 Manuale operativo e di manutenzione

Blitz

Blitz MJ-398U Manuale utente

Utilicom

Utilicom LongRanger 2050 Manuale utente

Standart

Standart HX290UKA Manuale utente

Altronix

Altronix Pace1PTM Manuale utente

Kirisun

Kirisun PT2208 Manuale utente

ELECRAFT

ELECRAFT KX2 Manuale utente

Zodiac

Zodiac K3 Manuale utente

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuale utente

Kenwood

Kenwood TK-2217 Manuale utente

Siemens

Siemens PSO 4000 Manuale utente

Kenwood

Kenwood TS-590SG Manuale utente

ComNav

ComNav Mariner X2 Manuale utente

Uniden

Uniden UH820 Series Manuale utente