Miele DA 3460 Manuale utente

Installation Instructions

DA3460, DA3480, DA3490 en - CA

Installation, repair and maintenance work should be performed by

a Miele authorized service technician in accordance with national

and local safety regulations and the provided installation instructions.

Disposal of packing material

The cardboard box and packing

materials protect the appliance during

shipping. They have been designed to

be biodegradable and recyclable.

Please recycle.

,DANGER

Ensure that any plastic wrappings,

bags, etc., are disposed of safely

and kept out of the reach of babies

and young children. Danger of

suffocation!

Disposal of an old appliance

Old appliances may contain materials

that can be recycled. Please contact

your local recycling center about the

possibility of recycling these materials.

Before discarding an old appliance,

disconnect it from the electrical

supply and cut off the power cord to

prevent it from becoming a hazard.

Caring for the environment

19

Appliance dimensions

20

* The hood can also be installed in a 23 5/8" (60 cm) cabinet.

Appliance dimensions

21

* The hood can also be installed in a 23 5/8" (60 cm) cabinet.

Appliance dimensions

22

1) Air extraction mode; consider accessories when measuring cabinet height and

cut-outs (e.g. muffler).

2) Recirculation mode with Installation kit DUU 151

Distance between cooktop and hood (S)

Do not install this exhaust hood over cooktops burning solid fuel.

Provided a larger distance is not given by the manufacturer of the cooktop,

follow the minimum safety distances between a cooktop and the bottom of the

hood:

Miele Cooktops Non-Miele

Cooktops

Electric Cooktops 24" (610 mm)

Electric Barbeques and Fryers 26" (660 mm)

Multiburner Gas cooktops

<43,000 BTU (12.6 KW)

and no burner > 15,000 BTU (4.5 KW)

26" (660 mm) 30" (760 mm)

Single burner (Wok) < 20,500 BTU (6 KW) 26" (660 mm) 30" (760 mm)

All other gas cooktops 30" (760 mm)

– If several gas surfaces are installed under the hood, the total output must be

considered when determining the minimum safety distance.

– If installing the exhaust hood in an overhead cabinet or if using a front panel

made of wood or plastic, observe the instructions of the manufacturer of the

gas cooktop regarding the use of flammable materials above the cooktop. If not

otherwise specified in the instructions, ensure a distance of at least 30”

(760 mm) from the gas cooktop.

–If local building codes require a greater safety distance, follow their requirement.

– If there is more than one appliance beneath the hood and they have different

minimum safety distances always select the greater distance.

See "Important Safety Instructions" for further information.

Appliance dimensions

23

Installation accessories

Installation

24

a2 runners

(1 x right, 1x left) to support the hood

in the cabinet.

b1 spacer strip

to conceal the gap between the rear

of the appliance and the wall.

cInstallation kit for recirculation

mode; contains air outlet grille, hose

and hose clips

(optional accessory)

dInstallation kit DML 400 to install a

custom panel

contains retractable brackets and

screws (optional accessory)

,CAUTION

To avoid risk of hand or other injury,

avoid contact with sharp edges

during the assembly and installation

process.

8 screws4x15mm

to anchor the ventilation hood in the

cabinet.

8 screws M4 x 12 mm

to anchor the ventilation hood at the

runners.

4 screws could be used (alternatively to

the plastic rivet) to fix the spacer bar.

2 screws4x15mm

to anchor the ventilation hood at rear

wall.

4 plastic rivets

to connect the space bar with the

appliance rear wall.

Installation

25

Installation

26

1. Installing the space bar

T=K cabinet depth minus G hood

depth

^The hood depth Gdepends on the

custom panel:

–aHood installed without front panel

–bHood installed with a cabinet

matching custom panel

These measures are only valid for the

installation if the front panel sits flush

with the cabinet corpus (without the

door).

If the front panel should be installed

recessed or flush with the cabinet door,

adjust the measure Taccordingly.

^Cut the supplied space bar to

measure T.

Clip it with a knife at the predeter-

mined breaking point of the next

lower measure.

^Screw the space bar flush with the

wall under the cabinet side walls.

^At the front edge of the spacer strip

draw a vertical line on left and right

side of the inside cabinet.

Installation

27

Altri manuali per DA 3460

1

Questo manuale è adatto per i seguenti modelli

2

Indice

Altri manuali Miele Cappa di ventilazione

Manuali Cappa di ventilazione popolari di altre marche

emmeti

emmeti RECUPA MED A-140 Guida

Nibe

Nibe F135 Manuale utente

Kuppersberg

Kuppersberg INTRO 60 Istruzioni di installazione e manutenzione

Zephyr

Zephyr Spruce AK9834BS Guida all'installazione

Hisense

Hisense MH6INBG Manuale utente

Broan

Broan 46000 Manuale utente

GE

GE Profile PV977 Istruzioni originali

FALMEC

FALMEC FFRIA24W5FS Manuale utente

Whirlpool

Whirlpool RH2600XL-1 SERIES Manuale utente

Küppersbusch

Küppersbusch DX ISLA Manuale utente

ETNA

ETNA AV360RVS Manuale utente

JUNO

JUNO JDF603E6 Manuale utente

Tricity Bendix

Tricity Bendix LE 150 Manuale

AEG

AEG X68163BV1 Manuale utente

AEG

AEG 125 D Manuale utente

Smeg

Smeg KSEV97X Manuale utente

Nibe

Nibe S Series Guida utente

Caple

Caple CCH100 Manuale