Cleaning and maintenance
Disconnect from the mains supply before cleaning. Use a damp cloth to
clean the exterior of the kettle. Never use harsh chemicals or abrasive
cleaning agents as these may damage the nish of your kettle.
4
You kettle should be periodically de scaled as the mineral deposits in tap
water may form scale at the bottom of kettle interior so as to cause the
operation less efficiency.
You can use the commercially available descaler and follow the instruc-
tions on the package of descaler. Alternatively, you may follow the below
instructions to use the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then add the water to the
amount so as to cover the bottom of kettle completely. Leave the solu-
tion in the kettle overnight.
2. Then discard the mixture in the kettle, then filling the kettle with clean
water, boiling and then discard the water. Repeat several times until the
odor of vinegar has been flushed away. Any stains remaining inside the
spout can be removed by rubbing with a damp cloth.
Removal of mineral deposits
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in
the non-working electrical equipments to an appropriate
waste disposal center.
Keep Warmer
•Remove the kettle cover,then place the Tea Pot on the big kettle,turn on
the Boiling Switch Control by “Keep Warmer”side down to warm-keep-
ing,the blue lamp lights up, then the warm-keeping system is working.
•The kettle must only be used with the base unit provided and is not to
be lled when located on the base unit.
•Clean the lter by brushing GENTLY with a small soft brush under water.
•Do not use a sharp object which may damage the lter mesh.
•If the supply cord is damaged, it must be replaced by the manufactur-
er or its service agent or a similarly qualied person in order to avoid a
hazard.
