MIGEL GVC200 Manuale utente
1
GVC 200
GVC 200
•
•
•
•
•
•
•
2
•
•
•
•
•
•
•
•
•
•
•
•
•
3
4
5
6
7
Problem Possible reason Active
Motor does not
start
Power card not rmly
plugged into outlet
Outlet damaged
Cleaner not switch on
•Plug unit rmly
•Check the outlet
Switch on the
•appliance
Suction power is
weaker
Unit clogged
Dust filter needs cleaning
Dust container not in position
Filter blocked
Remove the blockage
Clean the dust lter
Close the dust
container
Clean the lter
The wire can
not be winded
completely
The wire may diverge the
wire wheel
Draw the wire a little
then rewind
The wire can not
be draw out
The wire may wind
disorder
Press the rewinder
button and try again
Speed adjust
does notwork
Appliance is defective Repair the appliance
only specialist) or)
serviceagent
Power card
winds unwanted
back
Rewind mechanisms is
defective
Repair the appliance
(only specialist)
The dust
container can
not be closed
Dust lter is not in the
position
Fix the dust lter and
try again
Error detection
Before you contact our services center, lease check the following points
Environment
-Do not throw away the appliance with the normal household
waste at the end of its life, but hand it in at an ocial collection
point for recycling. By doing this, you help to preserve the
environment.
7
Indice
Lingue:
Altri manuali MIGEL Aspirapolvere
