Mighty Bright WonderFlex Manuale utente
Read all instructions prior to using your new product.
A few tips to get started:
- Turn on the light by pressing on/off button located
on the light head. Pressing the button again will
cycle through the light’s three brightness settings
(High, Med, Low) and eventually cycle off.
- Your WonderFlex light uses energy-efficient LEDs -
you’ll never need to replace any bulbs.
- Your WonderFlex is powered by 3 included
AAA batteries or a micro USB cable (not
included).
- To replace or insert new batteries, gently pull out
the battery tray at the base of the light. Insert
3 AAA batteries using the positive (+) and
negative (-) guides on the plastic.
Careful!
This product is not a toy and is not intended
for children under 13 years of age. Do not stare
directly at the LEDs or shine them into the eyes
of others. Do not attempt to remove or replace
the LEDs. Improper use of this or any battery-
operated product may cause batteries to
leak or explode, which may result in chemical
burns and/or personal injury.
Altri manuali Mighty Bright Attrezzatura di illuminazione
