Mighty GPS NV-X Manuale utente

MightyGPS NV-X Tracker

USER MANUAL

Preface

This manual shows how to operate the device smoothly and correctly. Make sure to read this manual

carefully before using this product. Please note that specification and information are subject to changes

without prior notice in this manual. Any change will be integrated in the latest release. The manufacture

assumes no responsibility for any errors or omissions in this document.

Content

1 Summary ------------------------------------------------------------------------------------------------- 3

2 Application ------------------------------------------------------------------------------------------ 3

3 Hardware Description

3.1 Wires Connection ---------------------------------------------------------------------------- 3

3.2 Interior ------------------------------------------------------------------------------------- ------- 4

3.3 External Relay Connection ---------------------------------------------------------- ----- 4

4 Specifications ---------------------------------------------------------------------------------------- 4

5 Battery and SIM Card Installation ------------------------------------------------------------------ 4

6 Startup ------------------------------------------------------------------------------------- ----------- 5

7 Usage --------------------------------------------------------------------------------------------------- -- 5

8 Fortifying Mode --------------------------------------------------------------------------------- --------- 5

8.1 Engine Started Alert ---------------------------------------------- --------- -------- 5

8.2 Movement Alert --------------------------------------------------------- --------- -------- 6

8.3 Power Cutoff Alert-------------------------------------------------------- --------- -------- 6

8.4 Remote Engine Cut-off Fuction--------------------------------------- --------- -------- 6

8.5 Checking the Working Status ----------------------------------------- --------- -------- 7

9 Tracking Mode -------------------------------------------- --------- -------- -------- 8

9.1 Initialization ---------------------------------- --------- -------- 9

9.2 Change the Password ---------------------------------- --------- -------- 9

9.3 Authorization ---------------------------------- --------- -------- 9

9.4 Auto Track ---------------------------------- --------- -------- 10

9.5 Geo-fence ---------------------------------- --------- -------- 10

9.6 Movement Alert ---------------------------------- --------- -------- 11

9.7 Overspeed Alert ---------------------------------- --------- -------- 11

9.8 IMEI Checking ------------------------------ --------- -------- 12

9.9 SOS --------------------------------- --------- -------- 12

9.10 Low Battery Alert --------------------------- --------- -------- 12

9.11 Hidden Number Tracking ---------------------------- --------- -------- 12

9.12 SMS Center ------------------------------ --------- -------- 13

9.13 GSM ID -------------------------------------------------------------------- 13

9.14 Motion Sensor -------------------------------------------------------------------- 13

9.15 SD Card Function -------------------------------------------------------------------- 14

10 Monitoring Mode ------------------------------ --------- -------- 14

11 GPRS Setting -------------------------------------------------------------------- 15

12 Cautions --------------------------------------------------------------------- 17

13 Faults & Solutions --------------------------------------------------------------------- 18

1 Summary

Working Based on existing GSM/GPRS network and GPS satellites, this product can

locate and monitor any remote targets by SMS or GPRS,and guard against theft o

Vehicle.

2 Applications

Rental vehicle / Fleet management etc

Covert tracking

3 Hardware Description

3.1 Wires Connection

7 4

Wire 1: LED indicator of working status

Wire2: ACC ‘-‘

Wire3 ACC ‘+’

Wire 4: 12V ‘+’

Wire 5: 12V ‘-‘

Wire 6: Microphone

Wire 7: On/off & SOS button

Wire 8: external relay plug

3.2 Interior

3.3 External relay Connection

4 Specs.

Content Specs.

Dimension. 80mm x 60mm x 25mm

Weight 100g

Network GSM/GPRS

Band 850/1800/1900Mhz or 900/1800/1900Mhz

GPS chip SIRF3 chip

GSM/GPRS module Simcom300/Simcom340

GPS sensitivity -159dBm

GPS accuracy 5m

Time To First Fix Reacquisition 0.1s Cold status 45s

Warm status 35s

Hot status 1s

Car charger 12—24V input

5V output

Wall charger 110－220V input

5V output

Battery Chargeable changeable 3.7V 1100mAh Li-ion batt

Standby 50hours

Storage Temp. -40°C to +85°C

Operation Temp. -20°C to +55°C

Humidity 5%--95% non-condensing

Put SIM card A here

(front side)

Put SIM card B here

(back side)

Put a SD card here

External relay

Connect here with the

tracker (ref Wire 8 )

Wire for car oil connecting

Wire for car oil

connecting

5 Battery and SIM card installation

Make sure that there is no call transfer and call display is on, and PIN code off. The

SMS message must in Text format, can’t be identified for PDU format.

Steps:

1 Open the cover with GSM/GPS antennas, pick out the mainboard,and put one or two

SIM cards into the holder.

2 Put in a SD card beside the SIM card B (at the back side of the maniboard).

3 Connect the battery with the mainboard.

SIM card A

SIM card B

SD card

connect mainboard

with the battery

6 Startup

Put the SIM card,SD card and battery in place.

Connecting the battery with the unit outdoors,while the indicator keep flashing quickly.

In 40-60 seconds, the unit will begin to work and acquire the GSM signals as well as

the GPS signals. The indicator keep flashing every 1 second when the unit has

received the signals, otherwise it will keep on.

When this unit receives GPS signals normally, you can use it and do all the following

settings.

7 Usage

The tracker has three working modes: Fortifying mode, Tracking mode and

Monitoring mode. Modes switch between “fortifying”, “ tracking” and

“monitoring”.

When power on the tracker, the default mode is “Fortifying” mode, you can send

“ tracker+password” to switch to tracking mode, or send “monitor+password” to switch

to monitoring mode, or “fortify+password” back to fortifying mode.

8 Fortifying Mode

When turn on the tracker, the default mode is Fortify mode.In fortifying mode, you can

call the tracker to activate the “protection” for your loved car or vehicle. The indicator will

flash every 4 seconds when the “protection “ is activated.

While the “protection” will be deactivated when you dial up the tracker again, the

indicator will flash every 1 second when the deactivation is done.

Remark: If ACC is connected, then you can not activate the “protection” for your car.

The tracker will be triggered to send an alert under one of following conditions:

8.1 Engine Started Alert

In fortifying mode, the tracker will start the ACC examine automatically. It will warn up

the user when the engine is started.

Alert format: fortify! + lat./long.

It will keep sending such an alert every 3 minutes, you can send”fortify123456” to stop

it.

8.2 Movement Alert

This function is using for the owner to get an alert when the tracker moves out of a

restricted district (500m radius),

Response SMS format: move!+lat./long..

It will keep sending such an alert every 3 minutes, you can send”fortify123456” to stop

it.

8.3 Power Cutoff Alert

In this mode, the tracker will warn up the user automatically when the main power is cut

off unwontedly,such as if someone cut the wire connected the car with the device, it will

alert “Battery with coordinates”.

Alert format: battery! + lat./long.

It will keep sending such an alert every 3 minutes, you can send”fortify123456” to stop

it.

NOTE: These three alerts only occurred when the “ protection ” is activated in fortifying

mode.

8.4 Remote Engine Cut-off Function

This function is using for the car owner to send a SMS remotely to stop a moving vehicle.

8.4.1 Setup: Send SMS command powercar123456 00 to the tracker to cut off oil and

power of the car to stop the car.

Reply format: powercar ok. You will receive such a reply if the setting is successful.

8.4.2 Cancel: Send SMS command powercar123456 11 to the tracker to restartup the

car again.

Reply format: powercar ok. You will receive such a reply if the setting is successful.

8.5 Checking the Working Status ( fortify or no fortify

)

You can send SMS command “fortified123456” to tracker, it will report “ fortifying “ or “

no fortify “ to you.

Reply “no fortify” means out of Fortify mode, Reply “fortifying” means under Fortify mode.

When the tracker in the monitoring mode or trackering mode, send SMS command

“fortify123456” to the traker,it will reply you “fortify ok”, make a call to it will under Fortify

mode.

9 Tracking Mode

9.1 Initialization

Send SMS “begin+password” to the unit, it will reply “begin ok” and initialize all the

settings. (default password: 123456)

9.2 Change the Password

Send SMS password+old password+space+new password to change the password.

(default password: 123456)

Remark:

Indice

Manuali GPS popolari di altre marche

Raven

Raven Cruizer II Manuale

Hama

Hama 53118 Manuale utente

Garmin

Garmin SOUNDER 125 Manuale utente

Garmin

Garmin DEZL 580 Manuale utente

Jigabot

Jigabot EX Manuale utente

Pointer

Pointer Cellocator CelloTrack XT LTE Guida all'installazione

Queclink

Queclink GV55LITE Manuale utente

Voxson

Voxson Voxtrack GPS500 Manuale di istruzioni

Garmin

Garmin ECHOMAP PLUS Manuale utente

Starcom Systems

Starcom Systems Kylos Compact Manuale utente

Garmin

Garmin 15 H Series Manuale utente

Cobra

Cobra Marine MC 600Ci Manuale utente

Cellocator

Cellocator CelloTrack T Manuale utente

Enfora

Enfora Mini-MT GSM2228UG001 Manuale utente

Magellan

Magellan eXplorist 100 Manuale utente

LTE

LTE G50B Manuale utente

Garmin

Garmin DEZL OTR500 Manuale utente

SkyGolf

SkyGolf SkyCaddie SG1 Manuale utente