MIKRODEV SC100 Manuale utente
04 / 2018
MIKRODEV_HM_SC100_EN
SC100
HARDWARE MANUAL
•SC100
SERIAL DEVICE GATEWAY Series
1
SC100 –HARDWARE MANUAL
CONTENTS
1SC100 GENERAL INFORMATION ........................................................................ 7
1.1 Physical Interfaces .................................................................................... 7
1.2 General Device Spesifications ..................................................................... 8
2INSTALLATION INFORMATION........................................................................... 9
2.1 Rail Installation ......................................................................................... 9
3CONNECTION DIAGRAMS ................................................................................11
3.1 Supply Connection....................................................................................11
3.2 RS485 SERIAL PORT .................................................................................12
3.3 RS232 SERIAL PORT .................................................................................13
2
SC100 –HARDWARE MANUAL
FIGURES LIST
Figure 1 Connecter and Physical Interfaces ............................................................... 7
Figure 2 Mounting.................................................................................................. 9
Figure 3 Demountage............................................................................................10
Figure 4 Power Connection Diagram........................................................................11
Figure 5 RS485 Input Connection Diagram ..............................................................12
Figure 6 RS232 Input Connection Diagram ..............................................................13
3
SC100 –HARDWARE MANUAL
Preface
Mikrodev SC100 Serial Device Gateway connects serial devices on RS232 and RS485
lines to TCP networks. The SC100 series converters are optionally connected to the TCP
via GSM, ETHERNET or Wi-Fi networks.
In this document, you can find information about the hardware specifications of Mikrodev
SC100 series devices.
Please follow our website www.mikrodev.com for the up to date version of the document.
4
SC100 –HARDWARE MANUAL
About Mikrodev
Since 2006, MIKRODEV has been developing and manufacturing industrial control and
communication products. MIKRODEV serves the system integrators in the public and
private sector, OEM and end users.
Our products are manufactured complying with the quality standards required by the
industrial automation industry and the quality of our products are proved on the field for
many years
MIKRODEV is one of the few companies in the world that has its own designed IEC
61131-3 compliant library for its programmable logic control devices. In addition, the
open, flexible, programmable SCADA solution developed by MIKRODEV is also available
to customers.
MIKRODEV products' performance and wide range of applications make them possible for
customers to achieve faster, simplified and cost-effective results.
5
SC100 –HARDWARE MANUAL
WARNING!
✓Please take care of the following issues when using Mikrodev devices.
✓Since the unit operates with 24 VDC (12-36 VDC) voltage, you should take care of
the voltage level that the unit is connected to. If a voltage above this voltage level
is applied, the device may be damaged and may be out of warranty.
✓Make sure that the energy connection of your device is connected to the ground
or to a properly grounded terminal.
✓Make sure that the environment in which your device is being used is free of
moisture, electric shock, vibration and dust.
✓Pay attention to the supply voltage and the connections of the product. Mikrodev
is not responsible for any issues due to power failure since there is no auxiliary
supply (UPS) on the device.
✓The fuse to be used must be a FF super fast type and current limit value 1A.
✓Do not use the device under conditions other than the environmental conditions
specified in the "Electrical Specifications" section (humidity, dust, liquid and
temperature, etc.)
✓Removing the warranty label on the product or removing the protective case will
void the warranty.
✓Products that are damaged, boxes have been changed and other brand labels are
affixed are not covered by the warranty.
✓The appliance must not be cleaned with solvents (thinner, benzine, acid etc.) or with
abrasive cleaning agents.
✓Only dry cloth should be used when cleaning the appliance.
✓Do not open the device by removing the case of the appliance, do not interfere
with the electronic components and circuits. There is no user-replaceable part
inside the device.
✓If there is a problem or malfunction on your device, it should only be repaired by
an authorized service. Installation and electrical connections must be made by
technical personnel in accordance with the instructions in the operating manual.
Failure to comply with these rules may result in death, serious injury or
property damage
6
SC100 –HARDWARE MANUAL
7
SC100 –HARDWARE MANUAL
1SC100 GENERAL INFORMATION
1.1 Physical Interfaces
Figure 1 Connecter and Physical Interfaces
1
GSM or WIFI antenna Connection
2
USB configuration port
3
SIM card Slot
4
Remote Connection Activity LED
5
System LED
6
POWER LED
7
Ethernet port
8
Factory Settings
9
M-BUS Connections
10
RS485 Connections
11
Rs232 TX-RX Connections
12
RS-232 Nötr Connection
13
DevicePower(V+)Connection(+24V)
14
DevicePower (V-)Connection
8
SC100 –HARDWARE MANUAL
1.2 General Device Spesifications
FEATURE
SECTION
DETAILS
Electrical
Supply
24 VDC
Power
<5W
Power Protection
Yes
Enviromental
Conditions
Operating Temperature
-20 / +75 C
Storage Temperature
-40 / +85 C
Humidity
5..95 RH
Communication Ports
Ethernet Port
100 Mbit
RS485
1 / 2 ( Optional )
RS232
1 / 2 ( Optional )
Wireless
Communication
GSM / GPRS
850/900/1800/1900MHz@GSM
GSM / 3G
800/850/900/1900/2100MHz@UMTS
850/900/1800/1900MHz@GSM
Wi-Fi
IEEE 802.11 b/g/n
Configuration
USB port
1
Over TCP
Over ETH/Wi-Fi/GSM
9
SC100 –HARDWARE MANUAL
2INSTALLATION INFORMATION
2.1 Rail Installation
DIN Rail Mountage
First, the upper part of the device is mounted on the DIN rail. Then, with the help of the
springs behind the device, when a lightly force is applied to the lower part, the device
locates into the DIN rail easily and the montage is completed. (See 16 A - 16 B)
Figure 2 Mounting
Altri manuali per SC100
1
Indice
Altri manuali MIKRODEV Portale
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
