Page 4
1. What is PIC clicker?
08
06
01 03
02
07
04 Figure 1-1: PIC clicker
05
11
05
10
10
09
01 USB MINI-B connector
02 3.3V Voltage regulator
03
Power indication LED
08
16 MHz crystal oscillator
05
44-pin PIC18F47J53 microcontroller
07
RESET button
04
mikroProg™ Programmer connector
06
mikroBUS™socket
09
Connection pads
10
11
Additional button
Additional LEDs
PIC clicker is an amazingly compact starter development kit
which brings innovative mikroBUS™host socket to your favorite
microcontroller. It features PIC18F47J53, 8-bit microcontroller,
two indication LEDs, two general purpose buttons, reset button,
USB MINI-B connector and a single mikroBUS™host socket.
mikroProg connector and pads for interfacing with external
electronics are provided as well. mikroBUS™host connector
consists of two 1x8 female headers with SPI, I2C, UART, RST,
PWM, Analog and Interrupt lines as well as 3.3V, 5V and GND
power lines. PIC clicker board can be powered
over USB cable
.
On-board power circuitry generates 3.3V and 5V. Power diode
(GREEN) indicates the presence of power supply.
