Miku SUPER Manuale utente
JJiangsu Xinri E-vehicle Co.,Ltd.
No.501 Xishan Road, Anzhen, Xishan District, Wuxi, Jiangsu Province, P.R.China
MIKU SUPER
Owner‘s Manual
CONTENTS
SECTION 05
RIDING GUIDE
SECTION 01
USER INSTRUCTIONS
SECTION 02
SAFETY INSTRUCTIONS
SECTION 03
PERFORMANCE
SECTION 04
DESCRIPTION OF COMPONENTS & PARTS
SECTION 06
THE MANUAL OF SMART CHARGER
SECTION 07
BATTERY & CHARGING
SECTION 08
STORAGE
SECTION 09
MAINTENANCE TIPS
SECTION 10
SMART APP INSTRUCTIONS
DESIGNED BY MIKU TEAM
Nov. 2020
WARNING!
Thanks for your purchasing of this vehicle. This model is designed for safety, built for
durability, and perfected for daily street use. The unique vehicle design, enrich of stylish and
personality, represents your outstanding taste and favor to pursue the state of the art living
attitude.
01 USER INSTRUCTIONS
01
Fully understand the information in this manual, including but not limited to the relevant instructions,
precautions and warnings.
Fully understand the operation & contingency measures of electric scooters.
Be fully aware of warning labels of electric scooters.
Modifying the scooter and/or removing original equipment and/or safety decals could make
this scooter unsafe for operation.
Please consult your dealer if you have any questions concerning this manual. Wish you safe and
pleasant riding experience!
This manual describes the correct usage of this motorcycle including safety riding, simple
inspection methods and so on. For a more comfortable and safety riding, please read this
manual carefully before riding and make sure you are always following the requirements below:
FOR YOUR OWN SAFETY, PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THIS
VEHICLE. ONLY OPERATE THE VEHICLE UNTIL YOU HAVE COMPLETELY AWARE OF ADEQUATE
KNOWLEDGE OF CONTROLS AND OPERATION FEATURE AND YOU HAVE BEEN TRAINING IN
SAFE AND PROPER RIDING TECHNIQUES. PERIODIC INSPECTIONS, WELL MAINTENANCE AND
GOOD RIDING SKILLS, WILL ENSURE YOUR SAFETY RIDING AND INCREASE THE PRODUCT
RELIABILITY OF THIS VEHICLE.
DESIGNED BY MIKU TEAM DESIGNED BY MIKU TEAM
02 SAFETY INSTRUCTION
02
THE VEHICLE IS TWO WHEEL SINGLE TRACK VEHICLE. IN ORDER TO ENSURE THE SAFETY OF YOU
AND OTHERS. TO REMIND OF OPERATOR, WHO SHOULD KNOW THE FOLLOWING REQUIREMENTS
BEFORE RIDING. HE OR SHE SHOULD:
3
4
5
03
Well trained and familiar to all the aspects of vehicle operation.
Obtain qualified training & legal license for operation of this vehicle.
Well and professional maintenance service for operator and certificated repair shop/dealer to acquire good
mechanical conditions of vehicle.
Driver
Driving after consuming alcohol or illegal drugs is strictly prohibited.
Always wear an approved helmet and protective clothing that cover your legs, ankles and feet.
Please DO NOT use high beam in good lighting conditions. The continuous use of high beam will cause
the visual disturbance to vehicles & pedestrians on the opposite side, thus affecting normal driving.
Please do not make or answer any call during riding, which is likely to cause traffic accidents.
Therefore
Always pre-check your vehicle before riding is important to prevent an accident.
Please follow the maximum loads limited of operator and passenger.
Observe traffic regulations and traffic signs and confirm the surrounding road conditions and bike
conditions at any time, so as to actively avoid danger.
Safe Riding
DESIGNED BY MIKU TEAM DESIGNED BY MIKU TEAM
04 05
In practice, the range is largely influenced by the driver’s weight and the additional load, weather conditions,
road conditions, the way it’s driven, the number of starts(e.g. on crossings), the condition of tires( especially their
inflation), batteries wear and tear and many other factors. In extreme conditions, the range can be reduced to
less than 50% of the indicated value.
Flat terrain, constant speed, no full load, no headwind, correct tire pressure, driver weight<70kg, no payload,
approx. 20℃ ambient temperature.
Inflated Tires Underinflated Tires
Unbalanced Power Pack
Balanced Power Pack
Warm Weather Cold Weather
High Head Winds
Slippery Roads
No Wind
DryRoads
Weather
Scooter
03 PERFORMANCE
low SpeedHigh Speed
Stop &Go
Elevation Changes
SoftGravel
Fewer Stops
Flat
Smooth Pavement
Route
More Less
Aggressive Riding
Fully Upright
Heavier
Modulated Riding
Streamlined
Reduced Cargo
Rider
Riding distance of per charge
The performance of an electric scooter is different from gasoline engine driven or human powered
vehicles. It's very important to understand how the electric scooter MIKU Super works before riding.
IDEAL CONDITIONS
DESIGNED BY MIKU TEAM DESIGNED BY MIKU TEAM
04 DESCRIPTION OF COMPONENTS & PARTS
06
Diagram of Components
07
Diagram of Dashboard
Battery case
Head light
Mirror
Storage
Seat
Passenger
foot rest Tail light
Front
suspension
Disc brake system
Side stand
Disc brake system
Motor
Rear swingarm
Instrument
Rear brake lever
Left switch
Tuning light
Right switch
Throttle grip
Front brake lever
Brake oil tank
D
B1
%
%
B2
000000ODO: km
km/h
100 120
80
60
40
20 0
POWER CHARGE
mph
miles
Battery charging hint
indicator
Position lights indicator
Malfunction indicator
Driving beam indicator
Handle failure indicator
Brake failure indicator
Right direction indicator
Left direction indicator
Controller failure indicator Battery capacity display
%
%
Speed display
km/h
mph
READY
Ready indicator
Mileage display
km
mile
ODO:000000
Bluetooth indicator
Central control signal
indicator
Tyre failure indicator
D
Drive mode
DESIGNED BY MIKU TEAM DESIGNED BY MIKU TEAM
Note: The following is MIKU Super smart version instrument.
05 RIDING GUIDE
08 09
Speed display
The speed display shows the riding speed.
Battery capacity display
This indicator shows the remaining capacity of the battery.
Drive mode
Here shows the speed mode which you choose. Driving beam indicator
Lights up whenever high beam is switched on.
Left direction indicator
This indicator light flashes when the left turn signal light is
activated.
Mileage display
Switch on the ignition, the indicator first 10 seconds displays the
total distance the scooter has been ridden in kilometers. And
then display the distance of single riding in kilometers.
Right direction indicator
This indicator light flashes when the right turn signal light is
activated.
Pre-ride Checklist
The condition of a vehicle is the owners’ responsibility. The operator should check the vehicle by
simple but thorough inspection, to make sure of vehicle condition, quick inspect some key and
important parts, to prevent the vehicle from serious consequence/accident. Please carefully check
the following points before each ride.
Tires
Ensure that both tires have at least 1/8 inch tread
depth at center.
Both tires must be inflated to the pressure indicated
on the tire sidewalls.
Replace the tires if tread height is less than 1/8 inch
at the center of tires.
Throttle
Check for smooth operation. Make sure throttle grip
could return to cut off power.
Check for frayed cable or damaged cable housing.
Replace damaged cable to avoid electricity shock.
Check for mud, debris and ice in the throttle
mechanism. Clean out any contamination.
1
2
3
1
2
3
DESIGNED BY MIKU TEAM DESIGNED BY MIKU TEAM
10 11
WARNING! Always perform the entire pre-ride checklist before using the scooter
as this can help you spot problems that could interfere with safe scooter
operation. Failure to follow this entire checklist before every ride can cause
serious injury, and/or property damage to yourself and/or others.
Ignition Switch
This position is used for operating the scooter.
Install the key and turn clockwise. At this
position the following sequence occurs:
All electric system are off. The key can be
removed.
To Lock The Steering Lock:
Lights turn ON Dashboard turns ON
To Unlock The Steering Lock:
Install the key and turn clockwise.
OFF
Position
ON
Position
Finger-print touch-start
Give a gentle touch to start the motor
With the key in the OFF position, turn the
handlebar all the way to the left.
Push the key down and turn the key
counter-clockwise.
Chassis frame Check for bent/damaged compo-
nents. Replace as necessary.
Battery Check the power level to ensure it's enough
for riding.
Lights Check for proper operation. Replace bulbs
as necessary.
Fasteners
Check that all axle nuts & lug nuts are secure.
Check for missing fasteners. Replace as necessary.
Check that all other fasteners are secure. Tighten as
necessary.
Steering
Make sure steering turns freely.
Check for proper “toe-in” of wheels.
Lubricate/Adjust as necessary. Please refer to the
maintenance section.
This switch controls the ignition, and also used to lock the steering. The various positions are described as below.
1
2
3
1
2
3
OPEN
PUSH
OPEN
OPEN
PUSH
OPEN
OPEN
PUSH
OPEN
DESIGNED BY MIKU TEAM DESIGNED BY MIKU TEAM
Short press twice “POWER KEY” to start
the motor
Long press to bind vehicle
Short press “LOCK KEY” to lock
Long press to mute lock
Short press “UNLOCK KEY” to unlock
Long press to open the Storage box
Description:
1 Press twice the POWER KEY to turn on
the ignition.
2 Press the LOCK KEY to lock the vehicle,
then it enters guard mode.
3 Press the UNLOCK KEY to unlock the
vehicle, it enters free mode. Now alarm
turned off manpower can push the bike.
1
2
12 13
Left&Right Switch
DANGER!
Be extremely careful when engaging the front brake to avoid locking the front wheel. Locking the
front wheel can cause a serious accident.
Throttle grip: The rotary throttle grip is on the right handlebar. Make sure that operation is smooth.
Accelerate by rotating the throttle towards you. Decelerate by rotating the throttle away
from you. The throttle includes a safety spring that snaps the throttle back to end when
released.
Rear brake lever: When stopping the scooter, squeeze the left brake lever smoothly and firmly to engage
the rear brake. Always engage the rear brake first.
Front brake lever: Squeeze the right lever to engage the front brake. The right lever must be squeezed
gently at first to avoid locking the front wheel.
Brake Levers & Throttle
1
1
2
2
3
3
1
2
3
4
MODE
R
P
6
7
8
9
5
Right switchLeft switch
Hazard warning lamp switch
1
High & low beam
2
Turn signal
3
Horn
4
83 speed control key :Ⅰ:ECO,Ⅱ:Normal,Ⅲ:Sport
Reverse
5
Auto Headlight
6
Headlight switch
7
9
Parking:
Switch on the ignition, the instrument displays P.
Press P button to remove parking function, then start
your ride.
During temporary stop, press P button to prevent
accidents caused by misoperation.
MODE
R
P
DESIGNED BY MIKU TEAM DESIGNED BY MIKU TEAM
Motor safety
14 15
Reduce the throttle to 0 position.
Operate the brakes.
After the vehicle is stopped turn off the ignition.
Lower the side/main stand with your foot while holding the motorcycle upright.Remove the key from the
main switch.
Stop the motor/Parking
Insert the key into the seat lock, and then turn the key clockwise to
“OPEN” the seat.
Fold the seat up.
Seat
Storage box
DANGER!
When braking, always engage the rear brake first to retain maximum control of the scooter.
Wet, oily, or sandy roads reduce braking effectiveness. Hard braking on these surfaces could
lead to loss of control and a serious accident. Always reduce speed as gradually as possible.
Keep the scooter free of dirt and
debris，especially in the throttle
linkage area.
Never start the engine or motor unless you
are property seated with your hands
firmly on the controls.
Make sure that all screws, locknuts, and bolts
are properly tightened. Never over-tighten
hardware that is designed to move.
Restricting moving parts can cause
a loss of control and possible injury
or death.
Never tamper with, alter, or change the scooter
motor settings. The motor governor is factory
preset and protects the motor from damage.
Excessive motor speed is potentially dangerous
to the operator，and the motor itself.
Operating the scooter in conditions where water,mud,snow,
dirt sand or other debris can get into the throttle wire conduit
and/or the throttle mechanism can cause
the wire or throttle mechanism to bind,
which may lead to throttle sticking,loss
of control,and possible death,injury,
and/or property damage.
Always replace torque-type locknuts with new locknuts
of the same type after removing the old ones.
Fasteners
After shutting off the e-bike, insert the key into the handlebar lock, and rotate it
leftwards to open the storage box.
With the bike unlocked, long press the finger-print touch start to open the storage box.
Long press the alarm unlock key to open the storage box.
2
1
3
4
Storage
Seat lock
Seat
DESIGNED BY MIKU TEAM DESIGNED BY MIKU TEAM
TO OPEN THE SEAT
TO OPEN THE STORAGE BOX
Indice
