Milesight Agricultural Kit Manuale utente

Milesight IoT

Agricultural Kit

Quick Guide

Safety Precautions

Milesight will not shoulder responsibility for any loss or damage resulting from not

following the instructions of this operating guide.

The kit must not be remodeled in any way.

EM300/EM500 are not intended to be used as reference sensors, and Milesight will

not should responsibility for any damage which may result from inaccurate readings.

Do not place the all devices close to objects with naked flames.

Do not place all devices where the temperature is below/above the operating range.

Make sure electronic components do not drop out of the enclosure while opening.

When closing the lid, make sure the lid is fitted the right way, so that the enclosure is

properly sealed.

When installing the battery of sensors, please install it accurately, not reversely or

with wrong model.

Make sure both batteries of EM300 are newest when install, or battery life will be

reduced.

The kit must never be subjected to shocks or impacts.

Declaration of Conformity

Milesight LoRaWAN®agricultural kit is in conformity with the essential requirements and

other relevant provisions of the CE, FCC, and RoHS.

All information in this guide is protected by copyright law. Whereby, no organization or

individual shall copy or reproduce the whole or part of this user guide by any means

without written authorization from Xiamen Milesight IoT Co., Ltd.

For assistance, please contact

Milesight technical support:

Email: iot.support@milesight.com

Tel: 86-592-5085280

Fax: 86-592-5023065

Address: 4/F, No.63-2 Wanghai

Road, 2nd Software Park,

Xiamen, China

Revision History

Date

Doc Version

Description

Jul. 27, 2020

V 1.0

Initial version

Dec. 8, 2020

V 2.0

Replace UC11-T1/UG85 to EM300-TH/UG65

Contents

1. Overview.........................................................................................................................................4

2. Preparation....................................................................................................................................4

2.1 Packing List.........................................................................................................................4

2.2 Software Preparation........................................................................................................ 5

3. UG65 Gateway Configuration..................................................................................................... 6

3.1 Fitting Installation.............................................................................................................. 6

3.2 Web GUI Access.................................................................................................................6

3.3 Network Connection.......................................................................................................... 7

3.3.1 Configure the WAN Connection........................................................................... 7

3.3.2 Configure the Cellular Connection.......................................................................8

3.4 LoRaWAN Configuration...................................................................................................9

4. UC1114 Configuration............................................................................................................... 10

5. EM300/EM500 Configuration.................................................................................................. 11

5.1 EM500 Assembly............................................................................................................. 11

5.2 Software Configuration...................................................................................................12

5.2.1 Mobile APP Configuration...................................................................................12

5.2.2 Windows Software Configuration...................................................................... 13

6. Milesight IoT Cloud Configuration...........................................................................................15

7. Hardware Installation................................................................................................................ 16

7.1 UG65 Installation..............................................................................................................16

7.2 UC1114 Installation......................................................................................................... 17

7.3 EM300 Installation...........................................................................................................18

7.4 EM500 Installation...........................................................................................................18

7.4.1 Sensor Installation................................................................................................18

7.4.2 Transceiver Installation....................................................................................... 19

Appendix.......................................................................................................................................... 20

Default Uplink Channels........................................................................................................ 20

Default LoRaWAN Parameters............................................................................................. 21

1. Overview

Milesight LoRaWAN®Agricultural Monitoring Node-to-App Starter Kit is designed for

simplifying the process of PoC about LoRaWAN®network establishment and remote

monitoring for the agricultural environment. More information about every product is

available on Milesight IoT website.

2. Preparation

2.1 Packing List

1 × UG65

1 × Ethernet Cable

1 × DC Jack Power

Adapter

1 × Mounting

Bracket

Bracket Mounting

Screws

Wall Mounting Kits

(For UG65)

1 × EM300-TH

Wall Mounting Kits

(For EM300-TH)

1 × UC1114

1 × Stubby LoRa

Antenna

1 × 12-Pin Pluggable

Terminal

Wall Mounting

Kits(For UC1114)

1 ×

EM500-SMTC

1 ×

EM500-LGT

Mounting Screws

(For EM500)

Hose Clamps

Note: Please contact your sales representative if the following situations occurs:

Any of above items is missing or damaged;

Other accessories or device models are required for your application.

2.2 Software Preparation

Software

Introduction

Appliance

Download

Milesight

Toolbox

Windows software for

NFC/USB configuration.

UC1114,

EM300/EM500

sensors

https://www.milesigh

t-iot.com/software-do

wnload/

Milesight

Toolbox

(APP ver.)

Mobile APP for NFC

configuration.

EM300/EM500

sensors

Apple Store or Google

Play

Milesight IoT

Cloud

(APP ver.)

Add and manage the

LoRaWAN®nodes on the

Milesight IoT Cloud.

Milesight IoT

Cloud

Apple Store or Google

Play

3. UG65 Gateway Configuration

3.1 Fitting Installation

Step 1: Insert the SIM card into the device according to the direction icon on the device.

If you need to take out the SIM card, press into the SIM card and it will pop up

automatically.

Note: UG65 does not support hot plugging (also called hot swapping). please turn off the

power before you insert or take off SIM cards.

Step 2: Install the power cable and Ethernet cable accordingly. After connecting the

Ethernet cable and power cable to corresponding interfaces, you can pass them through

the waterproof silicone and slid into the grooves. Then screw the protective cover back to

the device.

3.2 Web GUI Access

If this is the first time you configure the gateway, please use the default settings below:

ETH IP Address: 192.168.23.150

Wi-Fi IP Address: 192.168.1.1

Wi-Fi AP: Gateway_******

Username: admin

Password: password

Browser:Chrome (recommended)

Here are 2 ways to access the web GUI:

Wireless Mode: Enable Wireless Network Connection on your computer and search

for access point “Gateway_******” to connect it. After connected, type 192.168.1.1 to

your Internet browser to log in the web GUI.

Wired Mode: Connect Ethernet port of UG6x to your computer and configure the IP

address of computer manually, then type 192.168.23.150 to your browser to log in

the web GUI. Here are steps of configuring computer IP address manually based on

Windows 10 system.

Step 1: Go to “Control Panel” →“Network and Internet” →“Network and Sharing Center”,

then click “Ethernet” (May have different names).

Step 2: Go to “Properties” →“Internet Protocol Version 4(TCP/IPv4) ”and select “Use the

following IP address”, then assign a static IP manually within the same subnet of UG65.

3.3 Network Connection

This section explains how to connect the gateway to network via WAN connection or

cellular.

3.3.1 Configure the WAN Connection

Step 1: Go to “Network”→“Interface” →“Port” page to select the connection type and

configure Ethernet port information.

Step 2: Connect Ethernet port of gateway to devices like router or modem.

3.3.2 Configure the Cellular Connection

Step 1: Go to “Network” →“Interface” →“Cellular” →“Cellular Setting” page to enable

cellular settings and fill in SIM card information like APN or PIN code.

Step 2: Go to “Status” →“Cellular” page to view the status of the cellular connection. If it

shows “Connected”, it means the SIM has dialed up successfully. On the other hand, you

can check the status of LTE indicator. If it keeps on light statically, it means SIM has

dialed up successfully.

3.4 LoRaWAN Configuration

Step 1: Go to “Packet Forwarder” →“General” page to enable the “Milesight” type server.

Step 2: Go to “Network Server” →“General” page to enable the network server and

Milesight IoT Cloud mode.

4. UC1114 Configuration

Step 1: Rotate the antenna into the antenna connector accordingly. The external LoRa

antenna should be installed vertically always on a site with a good signal.

Step 2: Connect the terminal devices to digital input or reply output of the UC1114.

Step 3: Power on the UC1114 via terminal block(VIN, GND).

Step 4: Connect UC1114 to computer via micro USB port and open the Toolbox to

configure UC1114 if necessary.

Indice

Manuali Microfono popolari di altre marche

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manuale utente

DAPAudio

DAPAudio RM-101 Manuale utente

AKG

AKG CHM 21 Manuale utente

Sennheiser

Sennheiser evolution wireless series EM 100 Manuale utente

Sony

Sony C-48 Manuale utente

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manuale utente

Shure

Shure WH30TQG Manuale utente

auna PRO

auna PRO MIC-900 Manuale utente

AKG

AKG D 3800 Manuale utente

Shure

Shure KSM141 Manuale utente

MAIIN SOUND

MAIIN SOUND IIN style Manuale utente

Earthworks

Earthworks TC25 Manuale utente

Sennheiser

Sennheiser evolution D1 Manuale utente

Alesis

Alesis MicLink Wireless Manuale utente

DSPPA

DSPPA D6234 Manuale utente

Monacor

Monacor IMG STAGELINE ECM-300B Manuale utente

Ansr Audio

Ansr Audio Scan16 Manuale utente

Shure

Shure MXA710 Series Manuale utente