Milestone pro MP-WP6-IP Manuale utente

MP-WP6-IP

6 Buttons IP Control Panel

Program buttons to send RS232 commands to control projectors, screens

and other third-party devices.

Version: MP-WP6-IP_2023V1.0

User Manual

6 Buttons IP Control Panel

Preface

Read this user manual carefully before using the product. Pictures are shown in this

manual for reference only, different models and specifications are subject to real

product.

This manual is only for operation instruction, please contact the local distributor for

maintenance assistance. The functions described in this version were updated till

January, 2023. In the constant effort to improve the product, we reserve the right to

make functions or parameters changes without notice or obligation. Please refer to the

dealers for the latest details.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference.

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

6 Buttons IP Control Panel

SAFETY PRECAUTIONS

To ensure the best from the product, please read all instructions carefully before using

the device. Save this manual for further reference.

⚫Unpack the equipment carefully and save the original box and packing material for

possible future shipment

⚫Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

⚫Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

⚫Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

⚫Refer all servicing to qualified service personnel.

⚫To prevent fire or shock hazard, do not expose the unit to rain, moisture or install

this product near water.

⚫Do not put any heavy items on the extension cable in case of extrusion.

⚫Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

⚫Install the device in a place with fine ventilation to avoid damage caused by

overheat.

⚫Keep the module away from liquids.

⚫Spillage into the housing may result in fire, electrical shock, or equipment damage.

If an object or liquid falls or spills on to the housing, unplug the module immediately.

⚫Do not twist or pull by force ends of the optical cable. It can cause malfunction.

⚫Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

⚫Unplug the power cord when left unused for a long period of time.

⚫Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

Buttons IP Control Panel 
 
Contents 
Introduction.................................................................................................................1 
1 Introduction to MP-WP6-IP................................................................................1 
2 Features ............................................................................................................1 
3 Package List......................................................................................................1 
Panel Description........................................................................................................1 
System Connection.....................................................................................................3 
GUI Control.................................................................................................................4 
1 Log in.................................................................................................................4 
2 Home.................................................................................................................5 
3 Configuration.....................................................................................................5 
3.1 Knob........................................................................................................5 
3.2 Button......................................................................................................6 
3.3 TCP/IP.....................................................................................................6 
3.4 RS232 .....................................................................................................7 
3.5 IR.............................................................................................................7 
3.6 Relay.......................................................................................................8 
3.7 LED .........................................................................................................8 
3.8 Delay.......................................................................................................9 
4 Network .............................................................................................................9 
5 Setting .............................................................................................................10 
6 Upgrade...........................................................................................................10 
Specification .............................................................................................................11 
Panel Drawing ..........................................................................................................12 
Customer Service .....................................................................................................13 

6 Buttons IP Control Panel

1. Introduction

1.1 Introduction to MP-WP6-IP

The Wallplate Control Panel has (2) built-in programmable RS232 connectors and (2)

Infrared (IR) connectors.

The Programmable Control Panel can fully control the compatible switches, as well as

third-party devices such as matrix switcher, compact scaler switcher, projectors,

screens, etc. Use the device for presentations in showrooms, classrooms, and

boardrooms.

1.2 Features

⚫Six customizable control buttons;

⚫One volume control knob;

⚫Support IR, RS232 and TCP/IP control;

⚫Can be controlled and configured via GUI;

⚫Can be powered by PoE;

1.3 Package List

⚫1 x MP-WP6-IP

⚫1 x 2-Pin Pluggable terminal blocks

⚫6 x Button caps

⚫1 x 5-Pin Pluggable terminal block

⚫2 x 3-Pin Pluggable terminal block

⚫1 x Button label

⚫1 x User Manual

Note: Please confirm if the product and the accessories are all included, if not, please

contact with the dealers.

6 Buttons IP Control Panel

2. Panel Description

No.

Name

Description

Power LED

Illuminates green when power on.

Volume Knob

Black volume knob, high-quality knob with high damping

feel and stable structure, about 12-13mm in diameter

Button

(6) crystal and luminescent programmable buttons:

Each button can be programed with the Control Panel

Software.

Each label within a button can be easily changed.

Simply select the label you need and change it as

shown below:

6 Buttons IP Control Panel

Volume indicator

5x blue indicator lights, light up in percentage according

to the volume knob (1-19%, 20-39%, 40-59%, 60-79%,

80-100%)

TCP/IP

RJ45 connector. Connects with PC to run the GUI to

customize button control.

RESET

Long-press this button 3 seconds until the power LED

goes out to start to the restore factory defaults, and then

the LED will light up while the resetting is successful.

IR Sensor

Receives and learns the IR code to build the IR

database.

PWR(12V)

Connects with 12V DC power adaptor.

RELAY

Two groups of Relay Control, share a common switch

interface, default ON

Two sets of IR OUT, share a ground port, 5V standard,

connect to the infrared emitting rod

RS232

2 RS232 ports. Connect the third-party devices which

are need to be controlled via the MP-WP6-IP.

6 Buttons IP Control Panel

3. System Connection

The MP-WP6-IP can active different ports at one time. It means every button can send

the RS232 commands, IR code at the same time.

The demo system diagram as below:

System Diagram

1) Connect the MP-WP6-IP to the LAN port of Wireless Route, or control device (such

as PC) to TCP/IP port.

2) Connect the third-party devices (such as Matrix Switcher, Compact Scaler Switcher

or Projector) that need to be controlled to RS232 (1) ~RS232 (3) ports.

3) Connect the IR Emitters to IR (1) ~ IR (2) ports.

4) Connect to the third-party devices that need to be controlled by relay.

6 Buttons IP Control Panel

4. GUI Control

4.1 Log in

The MP-WP6-IP is controlled by TCP/IP. The default settings are:

IP Address: 192.168.0.178

Subnet Mask: 255.255.250.0

Type 192.168.0.178 in the internet browser, it will enter the below log-in webpage:

Username: admin

Password: admin

Type the username and password, and then click the login to enter the GUI setting.

6 Buttons IP Control Panel

4.2 Home

⚫Click the volume icon to adjust the volume; or click the knob icon to implement the

corresponding event;

⚫Mouse operation click the corresponding button

4.3 Configuration

4.3.1 Knob

⚫Knob/Button: Choose the knob or button to enter the event setting page

⚫Start up: Click to enter the starts up event setting page

Indice

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche