Press the STANDBY (1) button to enter or exit
Standby mode.
To switch the selected input for one or more of
the outputs, first press the number
corresponding to the desired INPUT (2), then
press one or more OUTPUTS (3) or the ALL (5)
button, then press the ENTER (4) button to
execute the change.
Examples:
To send input 3 to output 2, first press the
INPUTS 3 button, then press the OUTPUTS 2
button, and finally press the ENTER button to
execute the change.
To send input 1 to outputs 1 and 4, first press
the INPUTS 1 button, then press both the
OUTPUTS 1 and 4 buttons, and finally press
the ENTER button to execute the change.
To send input 4 to all outputs, first press the
INPUTS 4 button, then press the ALL button,
and finally press the ENTER button to execute
the change.
To set the EDID for one or more source devices
to the EDID capabilities of a specific output,
press the EDID (6) button, then press the desired
INPUTS (2) or the ALL (5) button, then press the
OUTPUTS (3) button corresponding to the
desired display, finally press the ENTER (4)
button to execute the operation.
