Milestone pro MP-IP300TR Manuale utente
MP-IP300TR
4K IP Streaming Transceiver
All Rights Reserved
Version: MP-IP300TR_2021V1.0
User Manual
4K IP Streaming Extender
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual are for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. The functions described in this version were updated till
November, 2020. In the constant effort to improve the product, we reserve the right to
make functions or parameters changes without notice or obligation. Please refer to the
dealers for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class Adigital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
4K IP Streaming Extender
SAFETY PRECAUTIONS
To ensure the best performance from the product, please read all instructions carefully
before using the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
4K IP Streaming Extender
Table of Contents
1. Product Introduction....................................................................................................1
1.1 About 10G Network ...........................................................................................1
1.2 Features ............................................................................................................2
1.3 Package List......................................................................................................2
2. Specification ...............................................................................................................3
3. Panel Description........................................................................................................4
3.1 MP-IP300TR Front Panel.................................................................................4
3.2 MP-IP300TR Rear Panel.................................................................................5
4. System Connection.....................................................................................................6
4.1 Usage Precaution..............................................................................................6
4.2 Connection Type................................................................................................6
4.3 System Diagram................................................................................................7
4.4 Hardware Setup.................................................................................................8
5. Operation of IPA Manager...........................................................................................9
5.1 General Information...........................................................................................9
5.2 Device Configuration .......................................................................................10
5.3 Start IPA Manager............................................................................................11
5.4 Video Routing Tab ...........................................................................................12
5.4.1 Video Switching.....................................................................................13
5.4.2 Sending Single Source to All RX Devices..............................................13
5.4.3 Stopping/Starting Video.........................................................................14
5.4.4 Disconnecting Source from RX..............................................................14
5.4.5 Preset Management..............................................................................14
5.5 Video Wall Routing Tab....................................................................................15
5.5.1 Configuring a Video Wall .......................................................................16
5.5.2 Preset Management..............................................................................16
5.5.3 Removing Receiver (RX) from Video Wall.............................................18
5.5.4 Changing Output Resolution for Video Wall Receivers..........................18
5.6 Multi-View Routing Tab....................................................................................20
5.6.1 Configuring a Multi-View........................................................................20
5.6.2 Create user-defined Multi-view mode....................................................21
4K IP Streaming Extender
5.7 RS-232 Routing Tab ........................................................................................21
5.7.1 Assign Transmitter to all Receivers........................................................22
5.7.2 Sending RS-232 Data from IPA Manager to a Device ...........................22
5.8 Infrared Routing Tab........................................................................................23
5.8.1 Assign Transmitter to all Receivers........................................................24
5.8.2 Sending IR Data from IPAManager to a Device....................................24
5.9 Global Command Options and Settings ..........................................................26
5.9.1 Receiver (RX) Settings Options.............................................................26
5.9.1.1. Display EDID..............................................................................26
5.9.1.2. Network Setting..........................................................................27
5.9.1.3. RS232 ........................................................................................28
5.9.2 Transmitter (TX) Settings Options .........................................................29
5.9.2.1. Input ...........................................................................................29
5.9.2.2. Device EDID...............................................................................29
5.9.2.3. Network Setting..........................................................................30
5.9.2.4. RS232 ........................................................................................31
5.10 System Management Tab..............................................................................31
5.10.1 Device Firmware Upgrade...................................................................31
5.10.2 System Backup and Restore...............................................................32
5.10.3 Security Settings..................................................................................33
5.10.4 System Logs........................................................................................34
5.11 Routing Table.................................................................................................34
6. Operation of GUI Control..........................................................................................37
7. Panel Drawing ..........................................................................................................38
8. Troubleshooting & Maintenance ...............................................................................39
9. Customer Service .....................................................................................................40
4K IP Streaming Extender
1
1. Product Introduction
The MP-IP300TR is a network AV Transceiver with HDMI input and output up to
resolution 4K@60Hz 4:4:4, HDR. It is designed for HDMI transmission over IP network
with control signals at distance up to 100m over CATx cable. It works with one control
PC (Wake on LAN) and one 10GbE Switch to control a variety of functions.
The MP-IP300TR provides one of the most advanced IP Streaming solutions on the
market utilizing BlueRiver™ technology, which synergizes various IP/AV standards to
work together as one. It combines a variety of 4K IP technologies and features under
one unified protocol using a simplified topology.
The MP-IP300TR features uncompressed video with zero-latency from transmitter to
receiver, seamless switching, Video wall, Multi-view, 1G Ethernet, IR, RS232, etc. It can
be controlled by the IPA Manager software.
Compares with traditional HDBaseT matrix AV Switching, MP-IP300TR features low
cost, easy installation, more interoperability and flexibility. It is ideal for distributing AV
over 10 Gigabit Ethernet in enterprises and other large-scale installations.
1.1 About 10G Network
Unlike traditional AV extension technology, such as HDBaseT, where transmitters and
receivers are connected point to point or joined together using custom matrix switches,
the MP-IP300TR is based on the inter compatible BlueRiver™technology and
connected using standard, off the shelf 10G Layer 2/3 network switches.
This architecture makes use of data packages that can be easily and independently
routed to the desired unit.A variety of transmission modes is possible this way, from
one unit to another unit (point to point) or one unit to many units (point to multipoint) or
many units to many units (multipoint to multipoint) with a software controllable video
wall integration.
An added benefit of packet data transmission is that each signal type (video, audio,
RS232, etc.) is routed independently and not necessarily to the same destination. For
example, the HDMI video from a particular unit is routed to other 4 units, while the
audio goes to all receivers in the setup.
This unlimitedly scalable and independent signal routing enables multiple, scalable
applications, including signal extension, splitting, switching, matrixing, and video wall
functionality.
4K IP Streaming Extender
2
1.2 Features
BlueRiver™ technology. Flexible used as either transmitter or receiver.
Streams uncompressed video with zero-latency, and control, with the flexibility of
transmitting them together or to separate network destinations.
Supports HDMI input and output video resolution up to 4K@60Hz 4:4:4 8bit,
1080P 3D.
18Gbps high bandwidth and supports HDR 10 and Dolby Vision.
Transports RS232 and IR signal to any units by using Unicast or Broadcast IPV4
protocol or local control byAPI server.
MP-IP300TR series are configurable HDCP 2.2 compliant.
Supports arbitrary Multi-view layout.
Supports Video Wall mode up to 5x5 screens.
Selectable output resolutions up to 4K scaling ability.
Transmitter route HDMI audio as an independent streaming for receiver
embedding.
BlueRiver™ Series is compatible with SDVoE, offering zero-latency AV-over-IP
with true 4K@60 and video processing.
1.3 Package List
1x MP-IP300TR
2x Mounting Ears with 2 Screws
4x Plastic Cushion
1x 3-pin Terminal Block
1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
4K IP Streaming Extender
3
2. Specification
Input
Video Input
(1) HDMI
Video Input Connector
(1) Type-A female HDMI
HDMI Input Resolution
Up to 4Kx2K@60Hz 4:4:4 8bit
Output
Video Output
(1) HDMI
Video Output Connector
(1) Type-A female HDMI
HDMI Output Resolution
Up to 4Kx2K@60Hz 4:4:4 8bit
General
Control
(1) 10G LAN, (1) IR IN, (1) IR OUT, (1) RS232,
(1) ETHERNET
Control Connector
(2) RJ45, (2) 3.5mm jack, (1) 3-pin terminal block
Power Consumption
18W (Max);
Operation Temperature
-10℃~ +55℃
Storage Temperature
-25℃~ +70℃
Relative Humidity
10%-90%
Dimension (W*H*D)
230.0mm x 25mm x 120.0mm
Net Weight
0.85KG
4K IP Streaming Extender
4
3. Panel Description
3.1 MP-IP300TR Front Panel
①POWER LED: The LED illuminates green when power is applied.
LINK LED: The LED indicates green if 10G LAN port is connected.
VIDEO LED: The LED illuminates green when the stable video signal is detected.
ETHERNET LED: The LED illuminates if data are transmitted.
LED on: Packets are not transmitted
LED blinking: Packets are transmitted
②HDMI IN LED: The LED illuminates green when video signal is detected.
HDMI OUT LED: The LED illuminates green when HDMI OUT port is connected.
TX LED: The LED illuminates green when the unit is deemed as transmitter.
RX LED: The LED illuminates green when the unit is deemed as receiver.
4K IP Streaming Extender
5
3.2 MP-IP300TR Rear Panel
①DC 12V: DC port for AC power adapter connection.
②HDMI IN: Type-A female HDMI port to connect HDMI video source device.
③HDMI OUT: Type-A female HDMI port to connect HDMI display device.
④10G LAN (PoE): RJ45 port to connect directly to the RX or a network switch using
a CATx cable.
⑤IR IN: 3.5mm jack to connect an IR receiver for IR routing control.
⑥IR OUT: 3.5mm jack to connect an IR emitter for IR routing control.
⑦RS232: 3-pin terminal block for RS232 routing control. Supports point to point
unicast and point to multipoint configuration.
⑧ETHERNET: RJ45 port to connect control devices (such as PC) for system control
via software and Ethernet pass-through.
DC 12V HDMI IN HDMI OUT IR IN RS232
Tx Rx
IR OUT ETHERNET
1 2 3 4 5 6 7 8
Indice
Altri manuali Milestone pro Ricetrasmettitore
