Millennion TX01S Manuale utente
1
Version 1.1
English
M.2 NVMe SSD
Enclosure
(Silver)
User Manual
2
Safety Precaution
Before using this product, please carefully read through the following pre-
cautionary notice and follow its guidelines. Improper use may cause harm
to the user and its surrounding environment.
WARNING
• Do not place this device in an area where there is risk of water getting
onto the device. Electric shock or re may occur and cause serious harm.
• Carefully examine if connection cord is damaged or broken. If the connect-
ing point is broken, then it could potentially result in electric shock or re
hazard.
• If there is smoke, abnormal noise, or oensive odor, stop using the device
immediately. Continued use may cause re, electric shock, or device rup-
ture.
• Do not place liquid containers near this device, as spilling liquid onto the
device can cause serious damage. Electric shock may occur if liquid is
accidentally spilled onto the device. If liquid is accidentally spilled on the
device, then unplug immediately and contact product support.
• Do not use this product on an uneven or unstable surface, as this product
could fall and cause damage or injury.
• Please do not attempt to disassemble or modify this product by yourself.
If a repair is needed, please contact product support.
If the user ignores or mishandles the safety notice, then there is risk of serious injury. The
guideline indicates clearly of what to be aware.
3
Safety Precaution
WARNING
• Be sure to turn o the power and unplug the connection cord before mov-
ing this product. Failure to do so may result in damaging the joint of this
device, or possibly getting the cord caught causing the product to fall or
injuring the user.
• When disconnecting the cord, please grab the root of the plug to pull out.
Forcefully pulling the cable part may cause damage to the cable or con-
nector.
• Do not attempt to pull out the connection cord with wet hands, as it will
cause electric shock and result in injury.
• Do not install this product in an environment where it is exposed to high
temperature. Direct sunlight or high temperature may cause product to
overheat and cause re or malfunction.
• Do not install this product in high-humid or dusty environments, as it could
potentially cause a re hazard.
• Please regularly check on this product to see if there is any abnormal be-
havior. If abnormal behavior occurs, then contact the support center.
4
Before Use
• Please carefully read through the safety guidelines to handle the product cor-
rectly and safely.
• Double check the device is functioning properly before use.
• Avoid heat and humidity when using this device. Make sure it is in a dry and
clean environment.
• It is normal for this product to generate heat while operating.
• Be mindful with static electricity when touching this device. Static electricity
may cause malfunction or failure.
• When transporting the product, please use cushiony material to prevent dam-
age.
• Prolonged exposure to chemical material may cause damage to the product
or a discoloration of the paint.
• If this product has not been used for an extended period, then the functional-
ity may be aected.
• If there is dirt on the body of the device, then please use a soft cloth to gently
wipe away the dirt. (Please do not use benzine as it will damage the paint)
• It is recommended to keep the original product package, as if the device
needs repair, then it is ideal to ship it with the original product packaging.
5
Table of Contents
• S a f e t y P r e c a u t i o n ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ P . 2
• B e f o r e U s e ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ P . 4
• T a b l e o f C o n t e n t s ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ P . 5
• Product Specication, content, supported SSD ・・・・・・・ P.6
• S S D I n s t a l l a t i o n G u i d e ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ P . 7
• H o w t o C o n n e c t a P C ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ P . 1 2
• H o w t o s a f e l y r e m o v e S S D ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ P . 1 3
• T r o u b l e s h o o t ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ P . 1 4
• S u p p o r t e d I n f o r m a t i o n ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ P . 1 5
6
Product Specication ・ Content ・
Supported SSD
■ Product Specication
• Product Model：TX01S
• USB Spec：USB3.1 Gen2
• Interface: Type-C
• Support OS (Windows): Windows 7/8/10
• Support OS(Mac): MacOS 10.10.5 or later
• Dimension: 103mm x 40mm x 11mm
• Weight: Around 75g (Excludes accessories)
■ Package Content
• TX01S
• Rubber Pad x2
• SSD Screw x1
• Type2260/2242 SSD Screwing nut x1
• Philips Screwdriver
• USB Type-C to Type-A Cable
• Manual URL and Warranty Card
■ Support SSD
• NVMe M.2 SSD Type2280/2260/2242
※ Does not support SATA(NGFF) M.2SSD
※ Does not support AHCI M.2 SSD
※ Does not support mSATA SSD
※ For Windows7/8, device operates at USB 3.0 transfer speed.
※ If user connects device to a port other than USB 3.1 Gen2 compatible, then the transfer
speed will be USB 3.1 Gen1 or USB 3.0.
※ Please use the latest OS if possible.
※ Device can be connected to USB 3.0 or 2.0 interface; however, the transfer speed will de-
crease.
7
SSD Installation Guide
■ Attachable M.2 SSD
This product is designed for NVMe M.2 SSD, thus it does not support SATA
and AHCI M.2 (NGFF) SSD. Please refer to the diagram below to check if
your SSD is compatible. In the case of AHCI M.2 SSD, it may be dicult to
distinguish at a quick glance, as they both look extremely similar. User is
advised to double check that it is NVMe M.2 SSD instead of AHCI M.2 SSD.
※ Please make sure to check your SSD before installation. If user installs
the wrong SSD, it will not work and runs the risk of damaging the SSD
itself.
NVMe M.2 SSD
One Notch in the terminal part to distinguish
itself as (M-Key). The label has notation of
“PCIe” or “NVMe”
SATA M.2 SSD
・ Two Notches indicate (B&M-Key)
・ Label has「SATA 6Gbps」notation.
AHCI M.2 SSD
・ One notch indicates (M-Key)
・ The label has “AHCI” notation.
8
SSD Installation Guide (Type 2280）
■ Remove the Bottom Cover
■ Attach SSD
Turn over the device and remove the bottom four screws with the included
screwdriver, then remove the bottom cover.
This page explains how to properly install NVMe M.2 SSD type 2280. For
how to attach Type 2260/2242 size M.2 SSD, please refer to page 10.
Align the notch to the connector and insert the SSD into the connector at
an angle. Make sure the SSD is securely inserted.
9
■ Screw the SSD
■ Attach the bottom cover
Screw the SSD with the included screws and screwdriver.
Attach the bottom cover and screw in the four screws with the provided
screwdriver. Complete with the attached rubber pad as required.
SSD Installation Guide (Type 2280）
10
SSD Installation Guide
（Type2260/2242）
■ Removing the Board
■ Attach SSD
Remove the two screws holding the board with included screwdriver.
This page explains how to install M.2 SSD type 2260/2242. The gure be-
low demonstrates how to install 2260 size; however, the same method can
be applied to 2242 as well.
Align the notch to the connector and insert the SSD into the connector at
an angle. Make sure the SSD is securely inserted.
Indice
