Miller Electric 300 457 Manuale utente

OWNER’S MANUAL

FORM: OM-237 279C 2008−04−21

All Terrain LX Running Gear For Gas And Diesel (300 457 And 300 458)

All Terrain LX Running Gear With Never FlattTires For Gas And Diesel (300 492 And 300 493)

DANGER! −Indicates a hazardous situation which, if not

avoided, will result in death or serious injury. The possible

hazards are shown in the adjoining symbols or explained

in the text.

Beware of electric shock from wiring. Stop engine and

disconnect negative (−) cable from battery before install-

ing this kit. Reinstall all panels and covers.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury. The possible ha-

zards are shown in the adjoining symbols or explained in

the text.

Falling equipment can cause serious personal injury and

equipment damage. Use lifting eye to lift unit and properly

installed accessories only, NOT gas cylinders. Do not

exceed maximum lifting eye weight rating. Lift and sup-

port only with proper equipment and correct procedures.

NOTICE Indicates statements not related to personal injury.

Indicates special instructions.

Wear safety glasses with side shields.

OM-237 279 Page 2

1. Assembling Of All Terrain Running Gear (300 457, 300 492)

Tools Needed:

7/16, 9/16 in

3/8, 9/16 in

234

810

Ref. 803 903−H

Remove and dis-

card existing

hardware before

installing handle.

Remove paint from axle grooves

before installing retaining rings.

Gas

Model

Diesel

Model

⇓

OM−237 279 Page 3

Description (Qty)

Part

No.

Item

No.

1 220263 Assy, Handle Running Gear (1)

2 108940 Screw, 250−20x .75 Hexwhd.61d Gr5 Pld (2)

3 220375 Bracket, Crossmember (1)

4 604224 Screw, 250−20 x .75 Hexwhd .50d Stl Pld Slffmg Tap−rw (6)

5 601965 Screw, 375−16 x 1.00 Hex Hd−pln Gr5 Pld (4)

6 167788 Nut, 375−16 .56hex .34h Stl Pld Sem Cone Wshr .88d (4)

7 235790 Rail, Base Support Rh (1)

8 135418 Axle, Running Gear .750 Dia X 25.745 (1)

9 602250 Washer, Flat .812id x 1.469odx.134t Stl Pld Ansi .750 (2)

10 220709 Wheel, Rbr Tire 10.250 Od X 3.125 Wide X .750 Bore (2)

10 238572 Wheel, Rbr Never Flat 10.250 Od X 3.125 Wide X .750 Bore (2)

11 121614 Ring, Rtng Ext .750 Shaft X .085 Thk E Style Pld (2)

12 235794 Wheel, Rbr Tire 14.500 Od X 4.750 Wide X 1.000 Bore (2)

12 237725 Wheel, Rbr Never Flat 14.500 Od X 4.750 Wide X 1.00 Bore (2)

13 235792 Axle, Wheel (Large) (1)

14 235789 Rail, Base Support Lh (1)

15 152461 Nut, 250−20 .44hex .23h Stl Pld Sem Cone Wshr .65d (2)

16 197930 Label, Warning Do Not Weld On Base (2)

17 145655 Ring, Rtng Ext 1.000 Shaft X .052 Thk E Style Pld (2)

18 602251 Washer, Flat1.062idx2.000odx.134t Stl Pld Ansi 1.00 (2)

Be sure to provide model when ordering replacement parts.

Assembly:

Assemble base rails, axles, and wheels

(valve stems out).

.Install onto generator using rail

mountinghole 5 for gas models or 1 for

diesel models. Adjust to achieve prop-

er balance for application and acces-

sories.

Mount handles. Do not tighten hardware.

Install crossmember and tighten all hard-

ware.

OM-237 279 Page 4

2. Assembly Of All Terrain Running Gear With Protective Cage (300 458, 300 493)

Tools Needed:

7/16, 9/16 in

3/8, 9/16 in

Ref. 803 905−H

Remove paint from axle grooves

before installing retaining rings.

⇓

Remove and

discard exist-

ing hardware

before instal-

ling handle.

OM−237 279 Page 5

Description (Qty)

Part

No.

Item

No.

1 220260 Rail, Side (2)

2 108940 Screw, 250−20 x .75 Hexwhd .61d Gr5 Pld (8)

3 220266 Assy, Cable Holder (4)

4 220263 Assy, Handle Running Gear (2)

5 601965 Screw, 375−16 x 1.00 Hex Hd−Pln Gr5 Pld (4)

6 235790 Rail, Base Support Rh (1)

7 167788 Nut, 375−16 .56hex .34h Stl Pld Sem Cone Wshr .88d (4)

8 135418 Axle, Running Gear .750 Dia X 25.745 (1)

9 602250 Washer, Flat .812id x 1.469od x .134t Stl Pld Ansi .750 (2)

10 220709 Wheel, Rbr Tire 10.250 Od X 3.125 Wide X .750 Bore (2)

10 238572 Wheel, Rbr Never Flat 10.250 Od X 3.125 Wide X .750 Bore (2)

11 121614 Ring, Rtng Ext .750 Shaft X .085 Thk E Style Pld (2)

12 235794 Wheel, Rbr Tire 14.500 Od X 4.750 Wide X 1.000 Bore (2)

12 237725 Wheel, Rbr Never Flat 14.500 Od X 4.750 Wide X 1.00 Bore (2)

13 235792 Axle, Wheel (Large) (1)

14 235789 Rail, Base Support Lh (1)

15 604224 Screw, 250−20 x .75 Hexwhd .50d Stl Pld Slffmg Tap−Rw (8)

16 111998 Pin, Cotter Hair .120 Dia X 2.375lg X .500 Shaft (4)

17 152461 Nut, 250−20 .44hex .23h Stl Pld Sem Cone Wshr .65d (8)

18 197930 Label, Warning Do Not Weld On Base (2)

19 145655 Ring, Rtng Ext 1.000 Shaft X .052 Thk E Style Pld (2)

20 602251 Washer, Flat1.062idx2.000odx.134t Stl Pld Ansi 1.00 (2)

Be sure to provide model when ordering replacement parts.

Assembly:

Assemble base rails, axles, and wheels

(valve stems out).

.Install onto welding generator. Use

mounting hole 5 in rails. Adjust to

achieve proper balance for applica-

tion and accessories.

Mount handles. Do not tighten hardware.

Install side rails and tighten all hardware.

Install cable holders.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Miller Electric Sistema di saldatura

Miller Electric

Miller Electric Legend 301 G Manuale utente

Miller Electric

Miller Electric Millermatic 90 Manuale utente

Miller Electric

Miller Electric MOG-200C Manuale utente

Miller Electric

Miller Electric Syncrowave 500 Manuale utente

Miller Electric

Miller Electric SWLR-115 Manuale utente

Miller Electric

Miller Electric Voltage Interface Control Manuale utente

Miller Electric

Miller Electric SPOOLMATE 200 SK-200 Spot Panel Manuale utente

Miller Electric

Miller Electric GPS-500 Manuale utente

Miller Electric

Miller Electric OM-1500-4 Manuale utente

Miller Electric

Miller Electric Maxstar 150 STL Manuale utente

Miller Electric

Miller Electric Millermatic 155 And M-15 Gun Manuale utente

Miller Electric

Miller Electric GL-25 Manuale utente

Miller Electric

Miller Electric Syncrowave 200 Manuale utente

Miller Electric

Miller Electric MT-17 STRAW Torches Manuale utente

Miller Electric

Miller Electric Universal Large Cylinder Cart Manuale utente

Miller Electric

Miller Electric SCP-200C Manuale utente

Miller Electric

Miller Electric STH 160 Manuale utente

Miller Electric

Miller Electric 456 CC Manuale utente

Miller Electric

Miller Electric MILLERMATIC 35 Manuale utente

Miller Electric

Miller Electric OM-229 038D Manuale utente

Miller Electric

Miller Electric ST 44 Series Wire Feeder Manuale utente

Miller Electric

Miller Electric Dynasty 700 Manuale utente

Miller Electric

Miller Electric Thunderbolt XL AC/DC Manuale utente

Miller Electric

Miller Electric Trailblazer Pro 350 D Manuale utente

Manuali Sistema di saldatura popolari di altre marche

Berner

Berner PLASMACUT 54 Manuale utente

Pro Spot

Pro Spot PR-155 Manuale utente

Forney

Forney 210 Manuale utente

Thermal Arc

Thermal Arc 400S Manuale utente

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuale utente

GYS

GYS PROTIG 201 AC/DC Manuale utente

TAFA

TAFA 30*8B35 Manuale utente

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuale utente

ESAB

ESAB Buddy Arc 145 Manuale utente

CIGWELD

CIGWELD 636804 Guida rapida

Red-D-Arc

Red-D-Arc DC-400 Manuale utente

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuale utente

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuale utente

WIA

WIA Weldmatic 270 CP132-2 Manuale utente

Sonics

Sonics H520T Manuale utente

Miller

Miller Big Blue 400D Manuale utente

NewArc

NewArc RT2000 Guida rapida

Hypertherm

Hypertherm powermax1000 Manuale utente